XOA Error when installing

kilo

is this the final thing that i should get???. How do i open the WEB UI ??

olivierlambert

You should have an IP. Go to the HTTPS of this IP and you'll have the UI

kilo

I do not know the IP. may be it used dhcp to launch......now how to find the IP ???

karlisi

https://xen-orchestra.com/docs/xoa.html#network-configuration

kilo

did networking step....tried pinging the IP but failed......opening in browser failed too!

kilo

I have used bridged routing between XCP-ng VM and host. To the XOA VM in the XCP-ng server I gave IP from the subnet of the server i.e 192.168.0.x

olivierlambert

Check your current XOA network config with ifconfig -a

olivierlambert

Wait, I don't understand. Where is running this XOA?

kilo

XOA virtual appliance is running in the xcp-ng center and xcp-ng center is running in vmware workstation.

olivierlambert

From your current machine (where you post on this forum) I suppose you can ping your host, correct?

But you can't ping XOA VM?

Danp

Look under the VM's Networking tab to confirm the assigned IP address.

ZacApplegate

@olivierlambert @Danp seems like you are deep in helping Kilo lol. Should I make a new post?

Danp

@ZacApplegate No need. @olivierlambert Can you give feedback on his prior post?

kilo

Indeed i can ping xcp-ng host (192.168.0.55) from my pc .......

kilo

@Danp IP address is same 192.168.0.77 in the networking tab

kilo

no result of ifconfig -a.

kilo

@olivierlambert yes indeed

olivierlambert

As sudoer, so with sudo before.

nackstein

@kilo at the shell prompt (as root user) type:

ip a l

you will see the IP if static of if DHCP worked.
if you need to configure the network edit (using vi or nano) /etc/network/interfaces
I show you mine as reference:

# and how to activate them. For more information, see interfaces(5).

source /etc/network/interfaces.d/*

# The loopback network interface
auto lo eth0
iface lo inet loopback

# The primary network interface
allow-hotplug eth0
iface eth0 inet static
    address 172.27.217.231
    network 255.255.254.0
    gateway 172.27.217.254

once the file is edited restart the network:

systemctl restart networking

note: remember to set auto on eth0 (see the line auto lo eth0)or when you give a network restart eth0 does not get the IP address and you need to reboot the VM.

kilo

still wont work with a sudo