XOSTOR hyperconvergence preview

BenHuzo

@olivierlambert Thank you for pointing that direction! I went ahead and made a request.

JensH

I am working for years with XenServer/Citrix Hypervisor and Citrix products like Virtual Apps.
Meanwhile I also have XCP-NG running on an test server for a while.
Well, I decided now to build a new small cluster with XCP-NG. One reason is also the XOSTOR option.

This new pool is planned with 3 nodes and multiple SSD disks (not yet NVMe) in each host.
I am wondering how XOSTOR creates the LV on a VG with let's say 4 physical drives:
Will it be a linear LV? Is there any option for striping or other raid levels available/planned?

Looking forward to your reply.
Thanks a lot for all the good work in a challenging environment.

olivierlambert

We don't need/want to have RAID levels or things like this, since it's already replicated to other hosts, this will make it too redundant. So it will be like a linear LV, yes

JensH

@olivierlambert thank you for the quick answer.
To be on the real safe side this means then a replication count not lower than 3 would be useful (from my perspective).

What would happen if a node of a 3 node cluster with replication count 3 (so all nodes have a copy) fails?
Would everything stop because replication count is higher than available nodes?
(I refer to post https://xcp-ng.org/forum/post/54086)

ronan-a

@JensH No. You can continue to use your pool. New resources can still be created and LINSTOR can sync volumes when the connection to the lost node is recreated.

As long as there is no split brain, and you have 3 hosts online, it's ok, that's why we recommend using 4 machines.
With a pool of 3 machines, and if you lose a node, you increase the risk of split brain on a resource but you can continue to create and use them.

olivierlambert

Also, keep in mind the LINSTOR put things in read only as soon you are under your replication target.

It means, on a 3 hosts scenario:

if you have a replication 3, any host that is unreachable will trigger read only on the 2 others
if you have a replication 2, you can lose one host without any consequence

So for 3 machines, replication 2 is a sweet spot in terms of availability.

Wilken

Hi,

I've run the install script on a XCP-ng 8.2.1 host. The output of the following command:

rpm -qa | grep -E "^(sm|xha)-.linstor."

sm-2.30.8-2.1.0.linstor.5.xcpng8.2.x86_64

xha-10.1.0-2.2.0.linstor.1.xcpng8.2.x86_64

is missing, because it is already installed in version:

xha-10.1.0-2.1.xcpng8.2.x86_64

from XCP-ng itself.

Is this packace still needed from the linstor repo?
Should I uninstall it an re-run the install script?

BR,
Wilken

olivierlambert

question for @ronan-a

ronan-a

@Wilken The modified version of the xha package is no longer needed. You can use the latest version without the linstor tag.

It's not necessary to reinstall your XOSTOR SR.

Wilken

Thank you @olivierlambert and @ronan-a for the quick answer and clarification!

BR,
Wilken

gb.123

@ronan-a

Hi !
Before I test this, I have a small question:
If the VM is encrypted, and XOSTOR SR is enabled, is the VM + Memory replicated or just the VDI ?
Once the 1st node is down, will the 2nd node take over as-is or will the 2nd node go to 'boot' stage where is asks for decryption password ?

Thanks

ronan-a

@gb-123 How the VM is encrypted? Only the VDIs are replicated.

gb.123

@ronan-a

VMs would be using LUKS encryption.

So if only VDI is replicated and hypothetically, if I loose the master node or any other node actually having the VM, then I will have to create the VM again using the replicated disk? Or would it be something like DRBD where there are actually 2 VMs running in Active/Passive mode and there is an automatic switchover ? Or would it be that One VM is running and the second gets automatically started when 1st is down ?

Sorry for the noob questions. I just wanted to be sure of the implementation.

Maelstrom96

@gb-123 said in XOSTOR hyperconvergence preview:

@ronan-a

VMs would be using LUKS encryption.

So if only VDI is replicated and hypothetically, if I loose the master node or any other node actually having the VM, then I will have to create the VM again using the replicated disk? Or would it be something like DRBD where there are actually 2 VMs running in Active/Passive mode and there is an automatic switchover ? Or would it be that One VM is running and the second gets automatically started when 1st is down ?

Sorry for the noob questions. I just wanted to be sure of the implementation.

The VM metadata is at the pool level, meaning that you wouldn't have to re-create the VM if the current VM host has a failure. However, memory can't/isn't replicated in the cluster, unless you're doing a live migration which would temporarily replicate the VM memory to the new host, so it can be moved.

DRBD only replicates the VDI, or in other terms, the disk data across the active Linstor members. If the VM is stopped or is terminated because of host failure, you should be able to start it back up on another host in your pool, but by default, this will require manual intervention to start the VM, and will require you to input your encryption password since it will be a cold boot.

If you want the VM to automatically self-start in case of failure, you can use the HA feature of XCP-ng. This wouldn't solve your issue with having to input your encryption password since, like explain earlier, the memory isn't replicated, and it would cold boot from the replicated VDI. Also, keep in mind that enabling HA adds maintenance complexity and might not be worth it.

gb.123

@Maelstrom96

Thanks for your clarification !
I was thinking of testing HA with XOSTOR (If at all that is possible). XOSTOR would also be treated as 'Shared SR' I guess ?

ronan-a

@gb-123 Yes, use the shared flag as in the sr-create example of the first post, and you can activate the HA like any shared SR.

Swen

hi @ronan-a,
we did some performance testing with the latest version and we run into a bottleneck we are unable to identify in detail.

Here is our setup:
Dell R730
CPU: 2x Intel E5-2680v4
RAM: 384GB
Storage: 2x NVMe Samsung PM9A3 3.84TB via U.2 PCIe 3 x16 Extender Card
NICs: 2x 10G Intel, 2x 40G Intel

We have 3 servers with the same configuration and installed them as a cluster with replica count of 2.
xcp-ng 8.2 with latest patches is installed. All servers are using the same switch (2x QFX5100-24Q, configured as virtual chassis). We are using a LACP bond on the 40G interfaces.

When using the 10G interfaces (xcp-ng is using those interfaces as management interfaces) for linstor traffic we run into a cap on the nic bandwith of around 4 Gbit/s (500MB/s).
When using the bonded 40G interfaces the cap is around 8 Gbit/s (1000MB/s)

Only 1 VM is installed on the pool. We are using Ubuntu 22.04 LTS with latest updates installed from ISO using the template for Ubuntu 20.04.

Here is the fio command we are using:
fio --name=a --direct=1 --bs=1M --iodepth=32 --ioengine=libaio --rw=write --filename=/tmp/test.io --size=100G

I would expect far more because we do not hit any known bottleneck of interfaces, NVMe or PCIe slot. Do I miss something? Is this expected performance? If not, any idea what the bottleneck is? Does anybody have some data we can compare with?

regards,
Swen

olivierlambert

use iodepth of 128
use 4 process at the same time (numjobs=4)
use io_uring if you can in the guest (and not libaio)
don't use a test file but bench directly on a non-formatted device (like /dev/xvdb), this removes the filesystem layer

With those settings in fio, I can reach near 2600MiB/s in read, and 900MiB/s in write with 4x virtual disks in mdadm RAID0, in the guest (a test VM on Debian 12), on rather "old" Xeon CPUs and a PCIe 3 ports on an consumer grade NVMe SSD.

Also, latest thing to know: if you use thin pro, you need to run the test twice, the first run (while the VHD is growing), it's always slower. And this is not a problem in real life, you can run twice or 3 times and check the result your tests, without counting the first.

I'm about to get more recent hardware (except the NVMe) to re-run some tests this week. But as you can see, you can go over a 20G network (I'm using a 25G NIC)

Swen

@olivierlambert thx for the feedback! I do not get how you see that you reach 20G on your nic. Can you please explain it? I see that you reach 2600MiB/s in read, but this is more likely on local disk, isn't? What I can see in our lab environment is that for what ever reason we do not get more than around 8Gbits on pass-through via a 40G interface and 4Gbits via a 10G interface and therefore we do not get any good performance out of the storage repository. I am unable to find the root cause of this. Do you have any idea where to look? I can see high waits on the OS of the VM, but no waits inside dom0 of any node.

olivierlambert

First, always do your storage speed test in a regular VM. The Dom0 doesn't matter: you won't run your workload in it, so test what's relevant to you: inside a dedicated VM.

Also, it's not only a matter of network speed, but latency, DRBD, SSD speed any many other things. Only Optane drives or RAM are relevant to really push XOSTOR, because there's not a lot of NVMe that can sustain heavy writes without slowing down (especially on 100GiB file).

But first, start to benchmark with the right fio parameters, and let's see