Endless Xapi#getResource /rrd_updates in tasks list
-
@olivierlambert
Simpler setup on my side:Pool 1 - 1 x ASRock Rack 1U4LW-X570/2L2T RPSU with about 10 VMs
Pool 2 - 1 x HP DL360 Gen9 with only the XO VM (Debian 11).Each host has 2 x 10 Gb NIC in use (one for VMs/MGMT, the other one for NFS storage).
The storage is a NFS share on a QNAP NAS (except for the XO VM which is on the local storage of the DL360 host).
The 2 hosts and the NFS storage are connected on the same10Gbit Ubiquiti EdgeSwitch.
Same plugins as @14wkinnersley + audit and sdn-controller.
The issue with stuck task is only appearing on the pool 1, not on the pool 2 with only the XO VM.
-
@olivierlambert Will do. Plugins are disabled and I'm updating back to master right now. Will report back.
-
Thank you very much, both of you
-
I'm gonna try the same and will let you know.
-
@olivierlambert Updated to master (Commit: 79c9ef0) with perf alert and load balancer plugin's disabled. Cleared the toolstack for good measure, and I got no hanging tasks.
For some further testing, I flipped the load balancer plugin back on and waited about 5 hours and received no hanging tasks. I turned load balancer plugin back off (Just in case), cleared the toolstack, and turned the perf alert plugin on and received the first hanging task within about 10 minutes, and subsequently had more tasks hang every ~10-12 minutes.
-
That would have been my next question
So it's the perf alert thing likely. Thank you, this will help @julien-f a lot -
@olivierlambert
It took a while to validate it, but I can also confirm that the perf-alert plugin is the culprit.Here are my plugin's parameters, if it can help chasing the goose:
-
@Mathieu I just activated this plugin as a test on our 2 EPYC hosts and I also get these tasks now. So yes, this plugin has an issue.
Deactivated.
-
Thanks @julien-f is now reviewing the plugin code
-
I am seeing this same issue on master build cc049 if I turn on perf-alert it starts with in a few minutes. If I turn it off and restart the tool stack it stops.
-
It's been fixed since a bit now. Double check you have the correct plugin code rebuilt.
-
@olivierlambert Unfortunately, I am still having this issue if I enable perf-alert. Im on the latest commit (cc049d3) and perf-alert (v0.3.7). I removed the plugin entirely from /packages/xo-server-perf-alert and rebuilt to test further (and restarted toolstack). Still having the tasks hang up
-
Can you try with an XOA on latest release channel?
-
Just rebuild open source from scratch and still getting the same issue
-
@olivierlambert Maybe I am doing something wrong but I went ahead and deployed xoa, and under plugins I only have two plugins and neither are for perf-alert. Ive never used XOA, only built XO, so its probably user error.
-
you have to register XOA in order to activate all of the plugins. You do it under the XOA tab. I would role it out to test but I have already registered it one and can't do it again. So I to have been running the open source code for my testing and evaluations.
-
@rmarion Im registered but dont have a license. Dont really want to use up the free trial, and it still only shows the two plugins. So maybe someone else can test.
-
@14wkinnersley Ya I don't work for Yates so I don't have any other option for you on that front. I was just advising on how you could test it with the trial.
-
@14wkinnersley Please use the trial, we can extend it anytime if you need.
-
@olivierlambert
I activated the trial and imported my configuration from xo, making sure the perf-alert plugin was enabled/configured. I have not received any hanging tasks in XOA.
