XSA-468: multiple Windows PV driver vulnerabilities - update now!

conitrade-as

@dinhngtu Ok, I will keep that in mind as I go through all the VMs. As I currently cannot update XCP-ng on all hosts (8.2.1 LTS), the VMs where the new tools were installed and mitigations applied show up as "orange".

On a XCP-ng 8.3 test hosts with all updates applied the detection works as advertised.

DustinB

@dinhngtu said in XSA-468: multiple Windows PV driver vulnerabilities - update now!:

@conitrade-as Installing the XenServer 9.4.1 tools and rebooting (a couple times) will be enough.

The multiple reboots is the annoying part, ha... working on my systems now. I've always used https://www.xenserver.com/downloads for this.

On numerous VM's I've been installing over top of the existing drivers and within System Manager I still see

.

Should I just uninstall the old stuff first, then install the updated to address?

dinhngtu

@conitrade-as The XAPI update was backported to 8.2.1 LTS so you could update your hosts for the new display.

@DustinB If you're coming from old XenServer tools to new, no need to uninstall.

DustinB

@dinhngtu said in XSA-468: multiple Windows PV driver vulnerabilities - update now!:

@DustinB If you're coming from old XenServer tools to new, no need to uninstall.

Interesting, the alert is still within XOA

...

dinhngtu

@DustinB Do you have the newest pool updates? The warning depends on that.

DustinB

@dinhngtu said in XSA-468: multiple Windows PV driver vulnerabilities - update now!:

@DustinB Do you have the newest pool updates? The warning depends on that.

I have an open ticket for that.....

conitrade-as

@dinhngtu On a Windows 10 VM rebooting alone did not do the trick. After 5 reboots the script still reports vulnerable devices:

.\Install-XSA468Workaround.ps1 -Scan

Looking for vulnerable XenIface objects
Found vulnerable object XENBUS\VEN_XSC000&DEV_IFACE\_
Found vulnerable object XENBUS\VEN_XSC000&DEV_IFACE\_

Looking for vulnerable XenIface WMI GUIDs
Found vulnerable WMI GUID 1D80EB99-A1D6-4492-B62F-8B4549FF0B5E
Found vulnerable WMI GUID 12138A69-97B2-49DD-B9DE-54749AABC789
Found vulnerable WMI GUID AB8136BF-8EA7-420D-ADAD-89C83E587925

Found XenIface vulnerability, it's recommended to run the script
True

Running .\Install-XSA468Workaround.ps1 works as expected. After another reboot nothing is reported as being vulnerable anymore.

On a Windows 2019 Server I saw the behaviour you described: Installing the tools and a reboot was enough.

conitrade-as

On another Windows 10 host it worked. What was different: I saw the message box "Tools have been installed successfully". May be that makes a difference?

dinhngtu

@conitrade-as I saw that on your Windows 10 VM, the "Manage Citrix PV drivers via Windows Update" option is enabled. That one might have needed a Windows Update to install the fixed drivers. Do you have that option enabled in other VMs?

conitrade-as

@dinhngtu On the machine where it worked, the option "Manage Citrix PV drivers via Windows Update" was not enabled. Seems that my older BIOS Windows 10 VMs have that option enabled. On all UEFI VMs the options is disabled.

As I wanted to go and check that is present in the templates, I realized that the Windows Templates are gone from Xen Orchestra v5.106.4???

DustinB

@conitrade-as said in XSA-468: multiple Windows PV driver vulnerabilities - update now!:

As I wanted to go and check that is present in the templates, I realized that the Windows Templates are gone from Xen Orchestra v5.106.4??

Can confirm all templates for Windows are missing on 5.107.0 as well.

dinhngtu

@conitrade-as @DustinB Thanks, reported the template issue to XO team.

conitrade-as

Here is another interesting fact: After installing the new tools (v.9.4.1) my static routes in Windows were all gone. Definitively a good way to loose connectivity to your domain controller. And that's why you have good monitoring and store things in Ansible et al. ...

DustinB

@conitrade-as said in XSA-468: multiple Windows PV driver vulnerabilities - update now!:

Here is another interesting fact: After installing the new tools (v.9.4.1) my static routes in Windows were all gone. Definitively a good way to loose connectivity to your domain controller. And that's why you have good monitoring and store things in Ansible et al. ...

Statically assign, but keep your DHCP server with reservations to address these types of issues

manilx

@DustinB Did run usr/bin/create-guest-templates but tepmlates are gone here also.

DustinB

@manilx said in XSA-468: multiple Windows PV driver vulnerabilities - update now!:

@DustinB Did run usr/bin/create-guest-templates but tepmlates are gone here also.

I did not, I'm in the middle of an AV/EDR migration and this way added to the list of things to touch while I was on the systems.

To me the templates are a minor inconvenience as we aren't constantly adding VMs.

conitrade-as

@DustinB Not IP assignments, I am talking about static routes. See e.g. https://learn.microsoft.com/en-us/powershell/module/nettcpip/get-netroute

DustinB

@conitrade-as said in XSA-468: multiple Windows PV driver vulnerabilities - update now!:

@DustinB Not IP assignments, I am talking about static routes. See e.g. https://learn.microsoft.com/en-us/powershell/module/nettcpip/get-netroute

Okay.... what...

pdonias

Hi! Regarding the templates issue, we're working on a fix on branch ~~pierre-fix-xsa468-test~~ master. Would anyone having the issue be available to test it?

conitrade-as

@pdonias Sure thing. I can test it in my test environment.