Host 2 shows Error but works just fine...

[acebmxer]

Hello I am on the current commit 31a3f for XO, but this issues has been around for a good while. Now with XOv6 coming along i see more into the error message. Please advise. This more of an annoyance then anything...

This is the error when i click on the alert next to host 2..

This warning just states no Pro support...

From v6

[acebmxer]

@DustinB

That pic was taken from the host tab. But yes I removed from the settings tab and host 2 still shows under pool 1 and all looks ok.

Thank you.

[DustinB]

@acebmxer Once a host is moved into a pool, XO not longer accesses that secondary host directly, everything is managed via the pool master.

You should remove the second host from XO assuming that your pool is showing all hosts.

[DustinB]

Also worth noting in v6, you can't see the individual hosts in the Hosts tab across the top, but in v5 you would see them here.

[acebmxer]

@DustinB can you explain further? What is the proper procedure to adding a second host once you have 1st host and xo setup? Below are the steps i did. To follow what you said i should be able to click settings and just remove the host2? From first picture?

1. Click on settings and add connect 2nd host.
2. click into the pool and choose add host. Selected host 2 and it dropped it from itself selfcreated pool and added into pool1 with host1.

Now i see what I showed in pics above.

v6

[DustinB]

@acebmxer If your pool consists of these 2 hosts, then you need to look at the Hosts tab like I showed in my screenshot to view the individual hosts.

To add additional hosts to this pool, you would add them how you have, but once you add them into "Pool 1" you can remove the connection from Settings > Servers so only your pool master is listed as the active connection.

Alternatively, you could just disable the individual server connections once they are added as member servers to your pool.

[DustinB]

For example this pool has 4 hosts.

But from the connections screen I only have the pool master connected to XO.

This scaling back of the connections under the "Server" settings is done after the secondary hosts are added into my pool.

[acebmxer]

@DustinB

That pic was taken from the host tab. But yes I removed from the settings tab and host 2 still shows under pool 1 and all looks ok.

Thank you.