VMWare import with UEFI fails
-
I've been importing VMs from VCenter to XCP-ng with decent success but find that my UEFI Debian boxes fail to start saying the device isn't found.
BdsDxe: failed to load Boot0001 "UEFI Misc Device" from PciRoot90x0) /Pci (0x3,0x0)/VenHw (...) : Not Found.
I tried booting into live cd and rebuilding grub but that didn't help. I'm at a loss at this point and not finding much to help find a solution. Tried both import from VMware and exporting to ova and importing that.
-
Hi,
Are you sure the VM is booting in UEFI mode on XCP-ng side?
-
Boot firmware under advanced is set to UEFI, yes. I can escape and get into the uefi menu at boot as well.
VMware vm also has EFI selected under boot options/firmware.
-
Any specific device/config on VMware side?
-
I do have a usb hard drive attached to one of them but I believe I exported it with that removed from the VMware side. I'll try again.
The other admittedly has a pass-through GPU. I assumed (I know, I know haha) that it would just ignore that during the migration. I'll try removing that as well.
-
The PCI device is probably the issue.
-
Unfortunately I don't believe that to be the case. I removed the pci device, rebooted the VM to ensure everything was fully baked in, shut it down and exported to OVA. I imported the OVA. It recognized it as BIOS which wedged at booting from hard disk with 100% CPU (as I expected it would but wanted to see what would happen). I shut it down and switched it to UEFI. That resulted in the previously seen missing device.
I then used the import from VMWare option. That did import it as UEFI but booting resulted in the exact same error.
-
There is something special about this VM, it's seeking for a device that's not here anymore, now the question is which device
Have you tried to remove the VMware tools in case they are doing something funky? -
Which is fair but I have moved 3 bios Debian 12 without issue. I have tried 2 different Debian 12 with UEFI and both have failed with the same error.
I use open-vm-tools on them. I'll try removing it but cannot start the vm for a while because something locks the vmdk on the esxi side after doing the xo migration and I have to either reboot the host or wait a while.
I'll try building a new uefi debian 12 vm and see if it happens from a clean build.
-
Thanks, keep us posted!
-
OK, I built a fresh UEFI Debian 12 from ISO on esxi. I then cloned it 3 times. I removed open-vm-tools from #2 and I installed xcp tools on #3 and imported all 3. They all have the same error.
I poked around the internet more while waiting and see other instances with proxmox in particular for Debian and Ubuntu. Something isn't jiving between DEB based UEFI and either the conversion process or TianoCore or something.
-
@Moxified I had a disk lock in VMware while transferring windows vm’s and restarting XOA released the lock for me.
-
@jebrown Thanks. I wondered about that. I just hadn't gotten around to trying that. Thanks for confirming!
-
No problem.. Not sure if it’s related or not but worth a shot so you don’t have to wait several hours for it to unlock
