XCP-ng
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Test results for Dell Poweredge R770 with NVMe drives

    Scheduled Pinned Locked Moved Hardware
    25 Posts 7 Posters 1.5k Views 6 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • P Offline
      Pilow @olivierlambert
      last edited by

      @olivierlambert said in Test results for Dell Poweredge R770 with NVMe drives:

      Hang on!

      no pun intended ? 😃

      1 Reply Last reply Reply Quote 0
      • olivierlambertO Offline
        olivierlambert Vates 🪐 Co-Founder CEO
        last edited by

        No pun, just wait for everyone to get back from our yearly Vates internal event 😉

        1 Reply Last reply Reply Quote 0
        • M Offline
          MarcVdS
          last edited by

          Hi,
          I'm having the exact same issue.
          Dell R650xs
          BOSS with M2 in RAID1
          Broadcom 25Gbps NIC's

          Glad to find out it's not an isolated issue. All is working fine in 8.2.1 in production for almost 2 years now, but of course 8.2.1 is out of service so I'm hoping the new ISO will be out soon.

          thanks,
          Marc

          DanpD 1 Reply Last reply Reply Quote 0
          • DanpD Offline
            Danp Pro Support Team @MarcVdS
            last edited by

            @MarcVdS The new ISO is already available. See this post for more details.

            M 1 Reply Last reply Reply Quote 0
            • M Offline
              MarcVdS @Danp
              last edited by

              @Danp
              OK thx, will test that right away!

              1 Reply Last reply Reply Quote 1
              • Y Offline
                yllar
                last edited by yllar

                Tested the newest iso (xcp-ng-8.3.0-20250606.2.iso) with Dell R770 and Broadcom 57508 100GbE QSFP56 Dual Port Adapter, PCIe Full Height

                It still fails to recognize the NIC, relevant log lines:

                [ 57.592461] Broadcom NetXtreme-C/E/S driver bnxt_en v1.10.3-232.0.155.5+
                [ 61.400879] bnxt_en 0001:5c:00.0 (unnamed net_device) (uninitialized): Firmware not responding, rc: -16 status: 0x8000
                [ 61.421312] bnxt_en: probe of 0001:5c:00.0 failed with error -16

                By the way, it works ok with 8.2.1 iso

                1 Reply Last reply Reply Quote 0
                • olivierlambertO Offline
                  olivierlambert Vates 🪐 Co-Founder CEO
                  last edited by

                  That's interesting 🤔 Is your firmware fully up to date on the NIC?

                  Y 1 Reply Last reply Reply Quote 0
                  • Y Offline
                    yllar @olivierlambert
                    last edited by

                    @olivierlambert Yes, the NIC firmware is the latest.
                    Strange that it works with 8.2.1

                    Y 1 Reply Last reply Reply Quote 0
                    • Y Offline
                      yllar @yllar
                      last edited by

                      Relevant lines in 8.2.1 where it succeeds:

                      [ 12.242658] Broadcom NetXtreme-C/E driver bnxt_en v1.10.0-216.0.119.1
                      [ 12.274753] bnxt_en 0001:5c:00.0 eth0: Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet found at mem 2affff010000, node addr 40:5b:7f:6e:22:00
                      [ 12.274767] bnxt_en 0001:5c:00.0: 252.048 Gb/s available PCIe bandwidth (16 GT/s x16 link)
                      [ 12.306588] bnxt_en 0001:5c:00.1 eth1: Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet found at mem 2affff000000, node addr 40:5b:7f:6e:22:01
                      [ 12.306599] bnxt_en 0001:5c:00.1: 252.048 Gb/s available PCIe bandwidth (16 GT/s x16 link)
                      [ 15.100023] bnxt_en 0001:5c:00.1 side-1659-eth1: renamed from eth1
                      [ 15.117296] bnxt_en 0001:5c:00.0 side-3513-eth0: renamed from eth0
                      [ 16.878049] bnxt_en 0001:5c:00.0 eth0: renamed from side-3513-eth0
                      [ 16.970941] bnxt_en 0001:5c:00.1 eth1: renamed from side-1659-eth1
                      [ 20.216480] bnxt_en 0001:5c:00.1 eth1: NIC Link is Up, 100000 Mbps full duplex, Flow control: ON - receive & transmit
                      [ 20.216487] bnxt_en 0001:5c:00.1 eth1: FEC autoneg off encodings: None
                      [ 20.734402] bnxt_en 0001:5c:00.0 eth0: NIC Link is Up, 100000 Mbps full duplex, Flow control: none
                      [ 20.734409] bnxt_en 0001:5c:00.0 eth0: FEC autoneg off encodings: None

                      1 Reply Last reply Reply Quote 0
                      • olivierlambertO Offline
                        olivierlambert Vates 🪐 Co-Founder CEO
                        last edited by

                        Not entirely strange, a driver version can make the difference.

                        1 Reply Last reply Reply Quote 0
                        • First post
                          Last post