XCP-ng
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Test results for Dell Poweredge R770 with NVMe drives

    Scheduled Pinned Locked Moved Hardware
    32 Posts 8 Posters 6.2k Views 7 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • Y Offline
      yllar @olivierlambert
      last edited by

      @olivierlambert Yes, the NIC firmware is the latest.
      Strange that it works with 8.2.1

      Y 1 Reply Last reply Reply Quote 0
      • Y Offline
        yllar @yllar
        last edited by

        Relevant lines in 8.2.1 where it succeeds:

        [ 12.242658] Broadcom NetXtreme-C/E driver bnxt_en v1.10.0-216.0.119.1
        [ 12.274753] bnxt_en 0001:5c:00.0 eth0: Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet found at mem 2affff010000, node addr 40:5b:7f:6e:22:00
        [ 12.274767] bnxt_en 0001:5c:00.0: 252.048 Gb/s available PCIe bandwidth (16 GT/s x16 link)
        [ 12.306588] bnxt_en 0001:5c:00.1 eth1: Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet found at mem 2affff000000, node addr 40:5b:7f:6e:22:01
        [ 12.306599] bnxt_en 0001:5c:00.1: 252.048 Gb/s available PCIe bandwidth (16 GT/s x16 link)
        [ 15.100023] bnxt_en 0001:5c:00.1 side-1659-eth1: renamed from eth1
        [ 15.117296] bnxt_en 0001:5c:00.0 side-3513-eth0: renamed from eth0
        [ 16.878049] bnxt_en 0001:5c:00.0 eth0: renamed from side-3513-eth0
        [ 16.970941] bnxt_en 0001:5c:00.1 eth1: renamed from side-1659-eth1
        [ 20.216480] bnxt_en 0001:5c:00.1 eth1: NIC Link is Up, 100000 Mbps full duplex, Flow control: ON - receive & transmit
        [ 20.216487] bnxt_en 0001:5c:00.1 eth1: FEC autoneg off encodings: None
        [ 20.734402] bnxt_en 0001:5c:00.0 eth0: NIC Link is Up, 100000 Mbps full duplex, Flow control: none
        [ 20.734409] bnxt_en 0001:5c:00.0 eth0: FEC autoneg off encodings: None

        1 Reply Last reply Reply Quote 0
        • olivierlambertO Online
          olivierlambert Vates 🪐 Co-Founder CEO
          last edited by

          Not entirely strange, a driver version can make the difference.

          1 Reply Last reply Reply Quote 0
          • Y Offline
            yllar
            last edited by yllar

            Also works with alt driver (broadcom-bnxt-en-alt-1.10.3_231.0.162.0-1.xcpng8.2.x86_64) in 8.2.1:

            # yum install broadcom-bnxt-en-alt
# reboot

# modinfo bnxt_en
filename:       /lib/modules/4.19.0+1/override/bnxt_en.ko
version:        1.10.3-231.0.162.0
description:    Broadcom NetXtreme-C/E/S network driver
license:        GPL
srcversion:     533BB7E5866E52F63B9ACCB
alias:          pci:v000014E4d0000D800sv*sd*bc*sc*i*
...
alias:          pci:v000014E4d00001604sv*sd*bc*sc*i*
depends:        devlink,ipv6
retpoline:      Y
name:           bnxt_en
vermagic:       4.19.0+1 SMP mod_unload modversions 

            # dmesg|grep bnxt_en
[   15.047312] Broadcom NetXtreme-C/E/S driver bnxt_en v1.10.3-231.0.162.0
[   15.048046] bnxt_en 0001:5c:00.0 (unnamed net_device) (uninitialized): Device requests max timeout of 60 seconds, may trigger hung task watchdog
[   15.215453] bnxt_en 0001:5c:00.0 eth0: Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet found at mem 2affff010000, node addr 40:5b:7f:6e:22:00
[   15.215469] bnxt_en 0001:5c:00.0: 252.048 Gb/s available PCIe bandwidth (16 GT/s x16 link)
[   15.216606] bnxt_en 0001:5c:00.1 (unnamed net_device) (uninitialized): Device requests max timeout of 60 seconds, may trigger hung task watchdog
[   15.265361] bnxt_en 0001:5c:00.1 eth1: Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet found at mem 2affff000000, node addr 40:5b:7f:6e:22:01
[   15.265372] bnxt_en 0001:5c:00.1: 252.048 Gb/s available PCIe bandwidth (16 GT/s x16 link)
[   15.350702] bnxt_en 0001:5c:00.1 side-5183-eth1: renamed from eth1
[   15.385121] bnxt_en 0001:5c:00.0 side-3345-eth0: renamed from eth0
[   17.400142] bnxt_en 0001:5c:00.0 eth0: renamed from side-3345-eth0
[   17.493640] bnxt_en 0001:5c:00.1 eth1: renamed from side-5183-eth1
[   20.614447] bnxt_en 0001:5c:00.1 eth1: NIC Link is Up, 100000 Mbps (NRZ) full duplex, Flow control: none
[   20.614454] bnxt_en 0001:5c:00.1 eth1: FEC autoneg off encoding: None
[   21.113687] bnxt_en 0001:5c:00.0 eth0: NIC Link is Up, 100000 Mbps (NRZ) full duplex, Flow control: ON - receive & transmit
[   21.113694] bnxt_en 0001:5c:00.0 eth0: FEC autoneg off encoding: None
            Y 1 Reply Last reply Reply Quote 0
            • Y Offline
              yannsionneau Vates 🪐 XCP-ng Team @yllar
              last edited by

              @yllar @mik @Pilow @marcvds Hello, we think we now understand better this issue.
              We think it's a Xen issue with regard to PCI devices on segment 0001 (which is your case) and not a dom0 driver issue.

              Could you give a try to this ISO installer please?
              Please note that this is a custom test ISO and it is therefore not officially supported, do not use it for production, it is just to confirm that it fixes your issue, we will release a supported ISO in the future (target date for now is June).

              unsupported test ISO for you to test: https://nextcloud.vates.tech/index.php/s/iHf8sqq39EqE683

              Regards,
              Yann

              Y 1 Reply Last reply Reply Quote 1
              • Y Offline
                yllar @yannsionneau
                last edited by

                @yannsionneau
                Thank you.

                I tested it and I can confirm this solves the issue.
                Hope you can release the fix quickly.

                1 Reply Last reply Reply Quote 1
                • olivierlambertO Online
                  olivierlambert Vates 🪐 Co-Founder CEO
                  last edited by

                  Thanks for confirming! This is really helpful 🙂

                  1 Reply Last reply Reply Quote 0
                  • Y Offline
                    yllar
                    last edited by

                    Has this been fixed by the update described here?
                    https://xcp-ng.org/blog/2026/05/21/may-2026-updates-3-for-xcp-ng-8-3-lts/?ref=xen-orchestra.com

                    Y 1 Reply Last reply Reply Quote 0
                    • Y Offline
                      yannsionneau Vates 🪐 XCP-ng Team @yllar
                      last edited by

                      @yllar I'm not sure honestly (I will have to ask the rest of the team), but anyway, even if it were fixed by latest xen package, we still didn't publish a new installer ISO with the fix.
                      Target is still around June for the new ISO.
                      Regards,
                      Yann

                      Y 1 Reply Last reply Reply Quote 0
                      • Y Offline
                        yllar @yannsionneau
                        last edited by

                        @yannsionneau

                        Hi, is June still the target for the iso?

                        Thanks

                        1 Reply Last reply Reply Quote 0

                        Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                        Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                        With your input, this post could be even better 💗

                        Register Login
                        • First post
                          Last post