Recommended DELL Hardware ?
-
Hello,
I have to buy 2 servers (Dell) for a small use case : 15-30 VMs, 128Gb RAM, not a lot of CPU, not a lot of storage, mainly linux VMs (and one fortinet...)
Is there a compatibility matrix for xcp-ng ?
What do you recommend between Intel or AMD (EPYC 9004) ?Is there some specific point to be aware ? we have used old harware with xcp-ng / orchestra but we need to buy new servers for this use case (need hardware support contract)
Thanks for your help
Johan -
Pretty much anything would work, it would be recommended that you use current hardware. Current being a CPU not older than 5 years.
Ideally using shared storage, either using XCP-ng's VSAN offering or something like a NAS or SAN so you can migrate your VMs as needed.
Intel or AMD doesn't effect the equation, just don't use ancient hardware. If you need an HCL, I'd recommend you take a look at what Citrix has for their HCL and go off of that list, and having installed XCP-ng.
-
@DustinB I'd like to step in, from past experience
- avoid Broadcom nics
- my preference goes ton INTEL cpus, saw some threads on poor network perf with AMD (but I could be wrong on this one)
- avoid adaptec HBAs
Storage wise XO STOR would need 3 hosts to be compliant, so you should follow advice of shared storage like a NAS or iSCSI SAN.
Plan accordingly if you need multipathing to shared storage (no NFS) or if you need thin provisionning (no iSCSI - lvmoiscsi is thick)
-
@DustinB Thanks. I need to buy new hardware because i want hadware support contract
will look at Citrix in their HCL ! -
@Pilow thanks, don't want XO STOR for this use case, i just need one server in a room and the other in another.