XCP-ng
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Citrix Hypervisor 8.0 landed

    Scheduled Pinned Locked Moved News
    65 Posts 20 Posters 34.9k Views 7 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • M Offline
      maxcuttins
      last edited by maxcuttins

      I finish to test XenServer8 with Ceph.
      It just works without patches.

      • Installation of the needed package wouldn't try to update any kind of package of the original installation.
      • Kernel is already higher enought to include higher RBD client.

      So you can just mount RBD images manually with few easy steps.
      I tested quickly the connection and performance were not very good (but I'm working in a nested virtualized environment).

      I guess all the mess in order to setup the connect are finally over.

      Now, what it's needed is to create a VHD on top of a RBD images.
      Probably we can just fork the LVMoverISCSI plugin in order to accomplish last mile of connection.
      However there are many alternative in order to complete this last step.

      R 1 Reply Last reply Reply Quote 0
      • olivierlambertO Offline
        olivierlambert Vates 🪐 Co-Founder CEO
        last edited by

        Can you write few lines on how you did the initial steps? (so we can provide a SMAPIv3 driver for further testing)

        M 1 Reply Last reply Reply Quote 0
        • R Offline
          r1 XCP-ng Team @maxcuttins
          last edited by

          @maxcuttins You can always have LVM SR on that RBD image device. You need to whitelist /dev/rbd in lvm.conf though.

          I'll test once XCP-NG 8 is available.

          1 Reply Last reply Reply Quote 0
          • M Offline
            maxcuttins @olivierlambert
            last edited by maxcuttins

            @olivierlambert said in Citrix Hypervisor 8.0 landed:

            Can you write few lines on how you did the initial steps? (so we can provide a SMAPIv3 driver for further testing)

            Oh yess!
            In reality I already wrote yesterday in the wiki everything we know as today about integration with CEPH:
            https://github.com/xcp-ng/xcp/wiki/Ceph-on-XCP-ng-7.5-or-later

            But this was before my test on XenServer8.
            However the steps are exactly the same.
            I summarize here the steps (but they are explained better in the wiki):

            yum install epel-release -y --enablerepo=extras
            yum install centos-release-ceph-nautilus --enablerepo=extras
            yum install yum-plugin-priorities --enablerepo=base
            yum install ceph-common --enablerepo='base,extras,epel'
            

            And that's all.
            Since today we always needed to install other connector in order to use rbd.
            This mean no need for rbd-fuse (rbd over fuse), rbd-nbd (rbd over NBD), ceph-fuse (cephFS over Fuse). We can use the original rbd directly with kernel support.

            To map an image:

            Before you can connect you need then to just exchange keyrings in order to allow the client to connect.
            In order to connect to an image called mytestimage created on the pool XCP-Test-Pool.
            Map the block device:

            rbd map mytestimage --name client.admin -p XCP-Test-Pool
            

            Create the filesystem that you prefer on top:

            mkfs.ext4 -m0 /dev/rbd/XCP-Test-Pool/mytestimage
            

            And mount:

            mkdir /mnt-test-ceph
            mount /dev/rbd/XCP-Test-Pool/mytestimage  /mnt-test-ceph
            

            I'm gonna to write down all these passages in the WIKI as soon as XCP-8 is out.
            Now the hype for the next release is even more. 😍
            I'm gonna to stalking @stormi all days 😈

            M 1 Reply Last reply Reply Quote 0
            • M Offline
              maxcuttins @maxcuttins
              last edited by maxcuttins

              I throw down one of my xcp-host to setup a not-nested-virtualized xen-8 in order to test RBD speed. Performance are about 4x slower than they should be but at least it run almost like a standard local disk.

              dd if=/dev/zero of=./test.img bs=1G count=1 oflag=dsync
              1+0 records in
              1+0 records out
              1073741824 bytes (1.1 GB) copied, 1.86156 s, 577 MB/s
              
              C 1 Reply Last reply Reply Quote 0
              • P Offline
                Prilly
                last edited by

                Have anybody tried xcp 8.0 with the intel x56xx series cpu?

                why is support for this cpus dropped, are there any technical behind it or just that they are old and considerd Legacy?

                i would like to know if this cpus have been tried with this veriosn of xcp.

                borzelB akurzawaA 2 Replies Last reply Reply Quote 2
                • C Offline
                  cg @maxcuttins
                  last edited by

                  @maxcuttins said in Citrix Hypervisor 8.0 landed:

                  I throw down one of my xcp-host to setup a not-nested-virtualized xen-8 in order to test RBD speed. Performance are about 4x slower than they should be but at least it run almost like a standard local disk.

                  dd if=/dev/zero of=./test.img bs=1G count=1 oflag=dsync
                  1+0 records in
                  1+0 records out
                  1073741824 bytes (1.1 GB) copied, 1.86156 s, 577 MB/s
                  

                  1G is usually a really bad test, as pretty small things can influence the result massively.
                  You should run tests with 10 or better 100 - if you can.
                  That also diminishes influence of any caches (on source and target!).

                  M 1 Reply Last reply Reply Quote 0
                  • borzelB Offline
                    borzel XCP-ng Center Team @Prilly
                    last edited by borzel

                    @Prilly XCP-ng 8.0 (the Host) is not released (even not an alpha or beta), I only released XCP-ng Center 8.0 (the Windows Client)

                    1 Reply Last reply Reply Quote 0
                    • akurzawaA Offline
                      akurzawa @Prilly
                      last edited by

                      @Prilly the same thing I'm wondering what could be wrong with that cpus beside of high power consumption which is obvious becouse those cpus are about 7 yrs old.

                      VmWare is working with that cpu but 6.7 installer says that the support for that cpu will be dropped. And that would be not good for me becouse I would need to replace all of my servers which is not the case.

                      1 Reply Last reply Reply Quote 0
                      • akurzawaA Offline
                        akurzawa @xisco
                        last edited by

                        @xisco said in Citrix Hypervisor 8.0 landed:

                        I hope XCP-ng will support legacy CPUs as I have E5-24XX series servers 😞
                        I guess they will work fine but as they are not supported officially ...

                        E5 arent legacy. Xeons x5xx are.

                        1 Reply Last reply Reply Quote 0
                        • A Offline
                          Arraylist
                          last edited by Arraylist

                          According to the XS HCL Citrix Hypervisor 8.0 is supporting Dell R420 servers but not Dell R430 (same model, but newer, you can still buy the R430). The newer R440 is also supported. This seems very odd to me. Has anyone any idea why this is the case?

                          1 Reply Last reply Reply Quote 0
                          • stormiS Offline
                            stormi Vates 🪐 XCP-ng Team
                            last edited by

                            While you're waiting for XCP-ng 8.0 beta, what about testing the latest security update to help us release it fast?

                            https://xcp-ng.org/forum/post/11832

                            Thanks!

                            1 Reply Last reply Reply Quote 0
                            • N Offline
                              nuts23
                              last edited by nuts23

                              Been running CH 8.0 for a week to test it out. There's an issue with the guest tools. performance is slow because the guests I/O isn't "optimized"

                              going to revert back to xcp 7.6 today.

                              1 Reply Last reply Reply Quote 0
                              • olivierlambertO Offline
                                olivierlambert Vates 🪐 Co-Founder CEO
                                last edited by

                                @nuts23 testing what? CH 8.0?

                                N 1 Reply Last reply Reply Quote 0
                                • N Offline
                                  nuts23 @olivierlambert
                                  last edited by

                                  @olivierlambert yes, sorry, the Citrix Hypervisor 8.0

                                  1 Reply Last reply Reply Quote 0
                                  • olivierlambertO Offline
                                    olivierlambert Vates 🪐 Co-Founder CEO
                                    last edited by

                                    Guest tools on Windows (I suppose) aren't working well?

                                    N 1 Reply Last reply Reply Quote 0
                                    • N Offline
                                      nuts23 @olivierlambert
                                      last edited by

                                      @olivierlambert yep

                                      1 Reply Last reply Reply Quote 0
                                      • olivierlambertO Offline
                                        olivierlambert Vates 🪐 Co-Founder CEO
                                        last edited by

                                        Have you used Citrix tools directly from CH ISO or something else?

                                        1 Reply Last reply Reply Quote 0
                                        • N Offline
                                          nuts23
                                          last edited by

                                          yes, I used the ones in the ISO and through the system. I also tried some older ones.. In the end the system never recognized that I had the proper ones installed. Tried with 2 different windows VMs. Server 2016 and Win10

                                          borzelB 1 Reply Last reply Reply Quote 0
                                          • P Offline
                                            Prilly
                                            last edited by

                                            Can anybody that has the means try to run Citrix Hypervisor 8.0 on those legacy 56xx series CPUs?

                                            C 1 Reply Last reply Reply Quote 0
                                            • First post
                                              Last post