Netdata package is now available in XCP-ng

PC_123

@PC_123
For anyone who has this issue in the future.

The command stormi provided did fix the problem on a running machine. Unfortunately it did not persist following a reboot.

The command: iptables -F

Seems to be a better long term solution.

Thanks again to @stormi for isolating the issue.

stormi

That command I provided is run each time the netdata service starts. So the proper fix is to find out why it doesn't work. Maybe it runs too soon and a dependency needs to be added to another systemd unit.

iptables -F is NOT a fix nor a "better long term solution". It simply deletes all the iptables rules, so basically you're disabling the firewall. By the way it does not survive a reboot.

thisisbenwoo

@olivierlambert I'm experiencing something similar. I recently installed XCP-ng, and the trial Premium license. But it also gives me the netdata not available error. I also don't think I have a xapi0:

uuid ( RO)                : 35124aac-2b87-4fff-8bc7-44ac346437fa
          name-label ( RW): Host internal management network
    name-description ( RW): Network on which guests will be assigned a private link-local IP address which can be used to talk XenAPI
              bridge ( RO): xenapi


uuid ( RO)                : e2e0991c-17a1-22ce-1b3c-ba5178105b7a
          name-label ( RW): Pool-wide network associated with eth4
    name-description ( RW):
              bridge ( RO): xenbr4


uuid ( RO)                : 63d1ff98-833c-f39f-cc65-d5843b20b037
          name-label ( RW): Pool-wide network associated with eth3
    name-description ( RW):
              bridge ( RO): xenbr3


uuid ( RO)                : 8b649421-9686-d09c-19f0-8726c04f9134
          name-label ( RW): Pool-wide network associated with eth0
    name-description ( RW):
              bridge ( RO): xenbr0


uuid ( RO)                : 8c47afa9-3bc0-dec0-3c2e-cd304d28b064
          name-label ( RW): Pool-wide network associated with eth2
    name-description ( RW):
              bridge ( RO): xenbr2


uuid ( RO)                : 37e022e3-d5dd-e0ea-0be6-e2f07d6c75fc
          name-label ( RW): Pool-wide network associated with eth1
    name-description ( RW):
              bridge ( RO): xenbr1

I would prefer to use the integrated installation, so that I can be assured of compatibility, etc. Thanks in advance. The product is awesome!

Professor-X-Tech

@stormi @olivierlambert

Trying to install it on my xcp-ng host and it having issue with the mirrors.

Do we need to do anything else?

stormi

You had the same issue with two different mirrors according to the message, so I'd first look at network issues or configuration.

Professor-X-Tech

@stormi

Just tired downloading one of the package from my other computer and it worked. issue seem to only be with my xcp-ng host. not sure how to troubleshoot this.

stormi

I can't help right now myself but I'm sure other users will have ideas. Can you open a separate thread since it's not directly related to netdata?

Professor-X-Tech

@stormi

Edit:
Thank you! Got it working and looking good.

Troubleshooting non related to Netdata.
I remember I change my upstream DNS to Quad 9 recently (1 week ago) and I just change it to Cloudflair (1.1.1.1) and it was the problem.

Look like Quad 9 (9.9.9.9) does not like the Mirrors for some reason.

discostur

@olivierlambert Just installed netdata package on our xcp-ng cluster. Its running like expected but i can only get ram / memory metrics from the dom0. Is there any way to get the full ram metrics from all VMs / host?

Thanks

stormi

As far as I know, they should be available. I/O metrics aren't at the moment, but RAM should be.

discostur

@stormi Could it be that there is any difference between the "netdata-ui" rpm package you provide and the official netdata rpm packages?

netdata-conf-1.23.2-1.el7.noarch
netdata-data-1.23.2-1.el7.noarch
netdata-1.23.2-1.el7.x86_64

Or could it be that it's related to XCP-NG 7.x? Because our cluster is still running 7.x ...

stormi

There definitly is. Ours is built with xen support. You seem to have enabled CentOS and/or EPEL repositories on your host, which is not recommended.

See https://xcp-ng.org/docs/additionalpackages.html

razvanp

Still getting this pesky "Netdata is not available on this appliance, please deploy a new one" after updating from the 'latest' channel.
Config is: XOA Premium Trial
--- XCP-ng 8.1.0-2
--- XOA Current version: 5.51.1 - XOA build: 20200627

node: 12.18.2
npm: 4.6.1
xen-orchestra-upload-ova: 0.1.3
xo-cli-premium: 0.11.0
xo-server: 5.68.0
xo-server-audit-premium: 0.8.0
xo-server-auth-github-premium: 0.2.2
xo-server-auth-google-premium: 0.2.2
xo-server-auth-ldap-premium: 0.9.0
xo-server-auth-saml-premium: 0.8.0
xo-server-backup-reports-premium: 0.16.7
xo-server-load-balancer-premium: 0.3.3
xo-server-netdata-premium: 0.1.1
xo-server-perf-alert-premium: 0.2.3
xo-server-sdn-controller-premium: 1.0.4
xo-server-telemetry: 0.3.0
xo-server-transport-email-premium: 0.5.0
xo-server-transport-icinga2-premium: 0.1.1
xo-server-transport-nagios-premium: 0.1.1
xo-server-transport-slack-premium: 0.0.0
xo-server-transport-xmpp-premium: 0.1.1
xo-server-usage-report-premium: 0.9.0
xo-server-web-hooks-premium: 0.1.1
xo-server-xoa: 0.10.0
xo-web-premium: 5.72.0
xoa-cli: 0.21.1
xoa-updater: 0.31.0

When I try to activate the Netdata plugin I get the error "Netdata is not available on this appliance, please deploy a new one". This is a fresh installation, but I did go to the web site and repeated the XOA deployment... and upgrade, reregister, etc., even though it made no sense to me. The result was the same error.

What am I missing?
Best,
Razvan

olivierlambert

Maybe a bug in the appliance. Can you open a support ticket and a tunnel so we can take a look?

LunarstarPony

I've got 2 hosts, Trying to install via XOA One of em works fine but the other one having this Error

Installation error
The installer could not prepare the required dependencies to enable Netdata Cloud functionality

and when I tried to connect by changing the URL this shows up
This netdata does not maintain a database for host: xcp-ng-ksu-backup

olivierlambert

Check if netdata is running in your dom0

LunarstarPony

@olivierlambert

Any idea how?
Or what's the command to check that?

olivierlambert

If it runs, there's a netdata service that should be up

LunarstarPony

@olivierlambert Hmmm How can I check that?

olivierlambert

It should be a systemd service IIRC, so systemctl status netdata