XCP-ng 7.5.0 Release Candidate

_danielgurgel

GFS2 is supported, like XenServer?

AllooTikeeChaat

Yum update both of my lab hosts to 7.5 RC .. nice job team!

Marc.pezin

@_danielgurgel No, GFS2 is not an open source feature in XenServer, it's proprietary.

borzel

yum upgrade on my testbox went ASAP - As Smooth As Possible

cocoon

Congratulations to everyone, impressive work!
I didn't expect ZFS and Ceph support so soon, nice!

@stormi said in XCP-ng 7.5.0 Release Candidate:

wget https://updates.xcp-ng.org/7/xcp-ng-7.5.repo -O /etc/yum.repos.d/xcp-ng-7.5.repo
yum install xcp-ng-deps
yum update
reboot

I was expect, to see 'update' message in new xcp-ng-center, after install repo and deps - but is not show anything.

Anyway, command line update works good.

christianuhlmann

my first host with xcp-ng upgraded successful to 7.5 (Intel NUC) without an error.
thanks for the great job !

Aimdev

Progress Report UG to xcp-ng v7.5 from xcp-ng v7.41
Method YUM

Error
Updating : sm-1.18.0-1.31.x86_64 69/147
Starting sm-multipath (via systemctl): [ OK ]
mv: cannot stat ‘/usr/sbin/lvmetad’: No such file or directory

Reboot PASS
Installed v7.5 xcp-ng centre PASS
Test Connection NAS PASS

Import VM created on V7.71 xcp-ng PASS
Passthrough USB Device USB3 Bus 001 Device 002: ID 1546:01a8 U-Blox AG FAIL
Passthrough USB Device USB2 Bus 001 Device 004: ID 1546:01a8 U-Blox AG FAIL
Passthrough USB Device USB2 Bus 001 Device 003: ID 051d:0002 American Power Conversion Uninterruptible Power Supply PASS
UPS Test apcupsd service not starting/will not start FAIL
Failed to start apcupsd.service: Unit apcupsd.service failed to load: No such file or directory.

note Reboot carried out for each USB U-Blox AG test.
note cold start carried out for USB2 U-Blox AG test.
note USB passthru not working for U-Blox AG (not visible in device list in xcp-ng centre)
note USB passthru working for UPS (visible in device list in xcp-ng centre)

Aimee

Adde

Updated and working so far

olivierlambert

@Aimdev

I'm not sure to get everything you wrote here.

mv: cannot stat ‘/usr/sbin/lvmetad’: No such file or directory is identified and reported to Citrix. It's not XCP-ng specific.
What do you mean by "test connection"?
Does USB passthrough worked before on 7.4.1?
What kind of modification did you do on 7.4.1 before updating? was it "vanilla" or you installed/configured some stuff on it?
apcupsd doesn't sound coming from vanilla XCP-ng

Aimdev

@olivierlambert said in XCP-ng 7.5.0 Release Candidate:

@Aimdev

I'm not sure to get everything you wrote here.

mv: cannot stat ‘/usr/sbin/lvmetad’: No such file or directory is identified and reported to Citrix. It's not XCP-ng specific.
Ok

What do you mean by "test connection"?
The hypervisor successfully connected to the NAS, for the purpose of importing a saved VM. The VM started OK.

Does USB passthrough worked before on 7.4.1?
Only showed the UPS usb device, never the U-Blox AG , this is the same situation with 7.5 (Thread USB Passthrough 20 Jun 2018, 14:13)
Both versions show the device U-Blox AG using the lsusb command.

What kind of modification did you do on 7.4.1 before updating? was it "vanilla" or you installed/configured some stuff on it?
Installed apupsd (Thread Apcupsd UPS support 15 Apr 2018, 17:33)
The upgrade appears to have removed the apcupsd daemon, /usr/sbin/apcupsd, but not the service definition
7.5
service apcupsd status
Redirecting to /bin/systemctl status apcupsd.service
● apcupsd.service
Loaded: not-found (Reason: No such file or directory)
Active: inactive (dead)
7.4
service apcupsd status
● apcupsd.service - SYSV: apcupsd monitors power and takes action if necessary
Loaded: loaded (/etc/rc.d/init.d/apcupsd)
Active: active (running) since Wed 2018-08-01 14:54:22 BST; 3h 49min ago
Docs: man:systemd-sysv-generator(8)
Process: 2199 ExecStart=/etc/rc.d/init.d/apcupsd start (code=exited, status=0/SUCCESS)
CGroup: /system.slice/apcupsd.service
└─2210 /sbin/apcupsd -f /etc/apcupsd/apcupsd.conf
APC : 001,045,1103
DATE : 2018-08-01 18:44:05 +0100

Citrix did not support apcupsd, but Citrix upgrades in the past did not remove it.

apcupsd doesn't sound coming from vanilla XCP-ng
No, but ups support is essential for safeguarding the system.

Aimee

olivierlambert

Yeah but Citrix isn't relying on Yum to upgrade If you want to be "defensive", then upgrade via the ISO on boot, not on a live system

Problably a dependency thing.

Aimdev

@olivierlambert
Hi

I do not quite understand your answer, please can you clarify.
The system was clean installed from 7.4, 7.41 to 7.5, all xcp-ng.
The ony addition was the ups yum , as described in my thread.
Are you suggesting that a clean install will

fix the pass through for the Ublox?
To get ups support I must repeat my extra ups software install,?
unless xcp-ng is going to provide an alternative package for UPS support?

Thanks

Aimee

olivierlambert

Nope
Yes.

stormi

This thread is having several discussions in parallel. If nobody minds, I'll move them to separate threads soon.

Update: done.

Update with HA enabled / or not upgrading master first : https://xcp-ng.org/forum/topic/265/issues-when-upgrading-with-ha-enabled
USB passthrough: https://xcp-ng.org/forum/topic/266/usb-passthrough-test-reports-in-7-5rc1

stormi

I pushed several update candidates to the RC in the updates_testing repository:

vhd-tool fixing two bugs:
- "VDI import seems broken for large VHD files" https://bugs.xenserver.org/browse/XSO-868
- "VDI export fails with VDI I/O error" https://bugs.xenserver.org/browse/XSO-873
xen security update

To test: yum update --enablerepo='xcp-ng-updates_testing*' and reboot.

What we need is to make sure they cause no regressions.

Thanks!

olivierlambert

@stormi said in XCP-ng 7.5.0 Release Candidate:

yum update --enablerepo='xcp-ng-updates_testing*'

Is this interfering with the ZFS packages or there is no issue to do it? (especially blktap)

stormi

@olivierlambert No issue to do it.

olivierlambert

Great!

christianuhlmann

@christianuhlmann said in XCP-ng 7.5.0 Release Candidate:

my first host with xcp-ng upgraded successful to 7.5 (Intel NUC) without an error.
thanks for the great job !

second server has also been updated successfully.

the third server I use pci passthroug for 2 DVB cards.
So far that was excellent under 7.4.1.

Since upgrading to 7.5 I get the following error if i want to start the vm with the passthroug pci devices:

vm.start
{
  "id": "40bcca30-d07a-db7c-5744-c134a30af5d1"
}
{
  "message": "INTERNAL_ERROR(xenopsd internal error: (Failure
  \"Error from xenguesthelper: Populate on Demand and PCI Passthrough are mutually exclusive\"))",
  "stack": "XapiError: INTERNAL_ERROR(xenopsd internal error: (Failure
  \"Error from xenguesthelper: Populate on Demand and PCI Passthrough are mutually exclusive\"))
    at wrapError (/home/node/xen-orchestra/packages/xen-api/src/index.js:197:9)
    at /home/node/xen-orchestra/packages/xen-api/src/index.js:1064:18
    at run (/home/node/xen-orchestra/node_modules/core-js/modules/es6.promise.js:75:22)
    at /home/node/xen-orchestra/node_modules/core-js/modules/es6.promise.js:92:30
    at flush (/home/node/xen-orchestra/node_modules/core-js/modules/_microtask.js:18:9)
    at _combinedTickCallback (internal/process/next_tick.js:131:7)
    at process._tickCallback (internal/process/next_tick.js:180:9)",
  "code": "INTERNAL_ERROR",
  "params": [
    "xenopsd internal error: (Failure
  \"Error from xenguesthelper: Populate on Demand and PCI Passthrough are mutually exclusive\")"
  ],
  "method": "VM.start"
}

all seem ok

# lspci
.....
02:00.0 Multimedia controller: Digital Devices GmbH Octopus DVB Adapter
......
08:00.0 Multimedia controller: Digital Devices GmbH Cine V7

# xl pci-assignable-list
0000:02:00.0
0000:08:00.0

# xe vm-param-get uuid=40bcca30-d07a-db7c-5744-c134a30af5d1 param-name=other-config
pci: 0/0000:02:00.0,0/0000:08:00.0; base_template_name: Debian Stretch 9.0; import_task: OpaqueRef:83a9253c-f3c0-448f-aba6-df5efa2c1c4a; mac_seed: 1113ba83-5709-4ca5-a292-f8b81a047db4; install-methods: cdrom,nfs,http,ftp; linux_template: true

Does anyone have any idea what that might be?
does anyone have an upgrade to 7.5 with pci passthroug on the run?

Thanks and Greetings

Christian