XCP-ng GPU Passthrough - No GPU found
-
@tjkreidl hmm it's not possible to "remove" the GPU for the dom0? It won't boot without it?
-
@olivierlambert No, it needs it (some sort of video board is necessary or it won't run at all). It has to at least be able to render the xsconsole interface.
-
Okay good to know
I had the hope that a serial console would be enough. I'll take a look if I can have any luck. -
So when will PCI passthrough be available through the GUI for lazy people such as myself? I don't mind dedicating a whole card per VM (Prefer it actually) but am highly hesitant to use the console. Thank you for all of the hard work, XCP-ng is awesome!
-
@misterpc23 sometimes even lazy people have to go to the cli
-
@borzel It wasn't scary at all! Only downside is my gpu hasn't showed up so I'm thinking it is not supported (R370). Where could I find a list of GPU's that will work with PCI passthrough with XCP-NG? Thank you for any help
-
KVM is quite easy to spoof the VM so the nvidia drivers work. Is it possible to do easily for xcp?
https://lists.xenproject.org/archives/html/xen-devel/2016-07/msg01713.html
-
You can pass the entire GPU if you like, it's no big deal. vGPU is another story.
-
I'm talking about GPU Passthrough, not vGPU. The GPU is passthrough fine but the nvidia driver results in code 43, meaning the driver detected it is running in a VM.
KVM bypass this by spoofing the VM, and it works, so can XCP do similar?
-
IDK what it means to spoofing the VM. If you can tell what's needed exactly, maybe we could do something
-
In KVM, I need to do these
- turn on cpu hidden state
-
Assign the gpu to vfio directly (I guess we may not need to do this here)
-
Blacklist the nvidia drivers like this
https://techblog.jeppson.org/2018/03/windows-vm-gtx-1070-gpu-passthrough-proxmox-5/
https://forum.proxmox.com/threads/gpu-passthrough-tutorial-reference.34303/
-
Hi, so some people have been able to do it
-
Hello,
My idea was to passthrough GPU to specific VM. According to many informations from the Internet, I'm doing this like that:
- /opt/xensource/libexec/xen-cmdline --set-dom0 "xen-pciback.hide=(03:00.0)(03:00.1)"
but still even after reboot I see it on lspci - xe vm-param-set other-config:pci=0/0000:03:00.0, 0/0000:03:00.1 uuid=c41704d0-a1f2-6bc1-fe2e-adc26697e636
for old Nvidia 8600 and GT430 it doesn't work - Windows VM see that device, drivers are installed but all the time I have error 43 and this device is stopped
for Radeon 7870 it work ok
Audio and USB is working with that metod also.
Is this connected with Vbios of this GPU's ?
- /opt/xensource/libexec/xen-cmdline --set-dom0 "xen-pciback.hide=(03:00.0)(03:00.1)"
-
Finally, we have GPU passthrough in the GUI,
But it is not working...
My setup:
CPU 2700x
MOBO: x470 Taichi
RAM: 32GB
GPU: Rx580 sapphire Nitro 4GBPlease, I did use CLI and GUI, no work.
Cannot see it in Windows.
 -
Ironically, I am trying to do this as well. I put a second graphics card in a host (NVIDIA NVS 510) and made sure the appropriate virtalization settings were enabled in the BIOS. Running up to date XCP-ng 8.0 (yum update as of yesterday afternoon). I can assign the GPU to the Windows Server 2016 guest in XCP-ng Center, and the NVIDIA drivers seem to install fine, but Device Manager reports the following:
What's also interesting is even though it warns that you must be able to access the VM remotely as there will be no local console, there is still a local console. I don't know if this means anything.
Any ideas?
-
@anthonyh Google code 43 NVIDIA...... Basic translation is we want to stop you doing this with a consumer card in a VM. There are solutions I believe.
-
Yes, using Nvidia card supporting GPU passthrough
Otherwise, there's "border line" patches on Windows drivers available on GitHub, but we won't find those for you
-
@linhnb don't think you can use the GUI for GPUs, only vGPUs.
RX580 does work, just follow the PCI passthrough guide.
-
AMD cards are indeed far better for both vGPU and GPU passthrough: it just works.
-
If only they made a LP vGPU card.... Looks like a WX4100 will have to do.
