XCP host rebooted: VM's wont start anymore :-(
-
No, the problem is a manual rename of the VHD in your SR.
-
@olivierlambert said in XCP host rebooted: VM's wont start anymore
:No, the problem is a manual rename of the VHD in your SR.
Checked /run/sr-mount/e1fb6d59-93c5-72bf-a018-184dd3ea3643 and there was a smal 300kb mailserver.vhd file dated october 15th ?? No clue why it was there.
I have removed it and the xe pbd-plug works now.
I also seem to able to start the vm now
-
Yes, you should never rename a file manually in the SR
So it blocked rescan, then PBD plub, then the VM.Also, please remove the unused host from your pool.
-
And finally, please consider getting pro support if you are running XCP-ng in production. You would have get faster assistance, but more importantly, contributing to the project (helping us to get more people involved)
-
@olivierlambert said in XCP host rebooted: VM's wont start anymore
:Yes, you should never rename a file manually in the SR
So it blocked rescan, then PBD plub, then the VM.Also, please remove the unused host from your pool.
Thanks for your help sofar, really appreciate it
The host was removed earlier.
The vm seems to work fine but I still cant install XOA from the webinterface or from cli with the script ? -
Please remove the host first. Not physically as you already did, from XAPI perspective
-
@olivierlambert said in XCP host rebooted: VM's wont start anymore
:And finally, please consider getting pro support if you are running XCP-ng in production. You would have get faster assistance, but more importantly, contributing to the project (helping us to get more people involved)
I certainly will consider it but i'm still in the process to decide if xcp_ng is something that suits me. I had some other quircky issues before that didnt convince me to put it in production (yet).
-
Well, renaming a VHD in the SR is a good way to learn to NOT do it
Also not removing a host in XAPI while doing it physically is also something else you have to avoid. -
@olivierlambert said in XCP host rebooted: VM's wont start anymore
:Well, renaming a VHD in the SR is a good way to learn to NOT do it
Also not removing a host in XAPI while doing it physically is also something else you have to avoid.To be honest I have no clue why this mailserver.vhd was there, at least it wasnt intentional to be there. But I assume it was caused by trying to backup the vhd's file from the SR. For some reason I couldnt and still cant get the backup or export function to work properly from XOA. Every backup ends after some seconds with some strange error...
-
It can't be done by XO, because XO is using XAPI to make all calls (there's no XAPI command to rename a file on the SR, also XO isn't connected via SSH, so there's 0 change it was caused by XO).
So it was done manually at some point (check your host bash history).
