XOSTOR hyperconvergence preview

ronan-a

@Swen said in XOSTOR hyperconvergence preview:

@ronan-a perfect, thx! Is this the new release Olivier was talking about? Can you provide some information when to expect the first stable release?

If we don't have a new critical bug, normally in few weeks.

@fred974

Or do I simply installed the new RPM without running the installer?

You can update the packages just using yum if you already have the xcp-ng-linstor yum repo config. There is no reason to download manually the packages from koji.

fred974

@ronan-a ok,
I managed to install using yum

yum install blktap.x86_64
yum install xcp-ng-linstor.noarch
yum install xcp-ng-release-linstor.noarch
yum install http-nbd-transfer.x86_64

But I cannot find sm-2.30.7-1.3.0.linstor.7.xcpng8.2.x86_64.rpm.
Is it yum install sm-core-libs.noarch ?

ronan-a

@fred974 What's the output of yum update sm?

fred974

systemctl enable --now drbd-reactor

Job for drbd-reactor.service failed because the control process exited with error code. See "systemctl status drbd-reactor.service" and "journalctl -xe" for details.

systemctl status drbd-reactor.service

[12:21 uk xostortmp]# systemctl status drbd-reactor.service
* drbd-reactor.service - DRBD-Reactor Service
   Loaded: loaded (/usr/lib/systemd/system/drbd-reactor.service; enabled; vendor preset: disabled)
   Active: failed (Result: exit-code) since Thu 2023-03-23 12:12:33 GMT; 9min ago
     Docs: man:drbd-reactor
           man:drbd-reactorctl
           man:drbd-reactor.toml
  Process: 8201 ExecStart=/usr/sbin/drbd-reactor (code=exited, status=1/FAILURE)
 Main PID: 8201 (code=exited, status=1/FAILURE)

journalctl -xe has no usefull information but the SMlog log file has the following:

Mar 23 12:29:27 uk SM: [17122] Raising exception [47, The SR is not available [opterr=Unable to find controller uri...]] Mar 23 12:29:27 uk SM: [17122] lock: released /var/lock/sm/a20ee08c-40d0-9818-084f-282bbca1f217/sr Mar 23 12:29:27 uk SM: [17122] ***** generic exception: sr_scan: EXCEPTION <class 'SR.SROSError'>, The SR is not available [opterr=Unable to find controller uri...] Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/SRCommand.py", line 110, in run Mar 23 12:29:27 uk SM: [17122] return self._run_locked(sr) Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/SRCommand.py", line 159, in _run_locked Mar 23 12:29:27 uk SM: [17122] rv = self._run(sr, target) Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/SRCommand.py", line 364, in _run Mar 23 12:29:27 uk SM: [17122] return sr.scan(self.params['sr_uuid']) Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/LinstorSR", line 634, in wrap Mar 23 12:29:27 uk SM: [17122] return load(self, *args, **kwargs) Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/LinstorSR", line 560, in load Mar 23 12:29:27 uk SM: [17122] raise xs_errors.XenError('SRUnavailable', opterr=str(e)) Mar 23 12:29:27 uk SM: [17122] Mar 23 12:29:27 uk SM: [17122] ***** LINSTOR resources on XCP-ng: EXCEPTION <class 'SR.SROSError'>, The SR is not available [opterr=Unable to find controller uri...] Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/SRCommand.py", line 378, in run Mar 23 12:29:27 uk SM: [17122] ret = cmd.run(sr) Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/SRCommand.py", line 110, in run Mar 23 12:29:27 uk SM: [17122] return self._run_locked(sr) Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/SRCommand.py", line 159, in _run_locked Mar 23 12:29:27 uk SM: [17122] rv = self._run(sr, target) Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/SRCommand.py", line 364, in _run Mar 23 12:29:27 uk SM: [17122] return sr.scan(self.params['sr_uuid']) Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/LinstorSR", line 634, in wrap Mar 23 12:29:27 uk SM: [17122] return load(self, *args, **kwargs) Mar 23 12:29:27 uk SM: [17122] File "/opt/xensource/sm/LinstorSR", line 560, in load Mar 23 12:29:27 uk SM: [17122] raise xs_errors.XenError('SRUnavailable', opterr=str(e))

Is it normal that the XOSTOR SR is still visible in XO?

fred974

@ronan-a said in XOSTOR hyperconvergence preview:

What's the output of yum update sm?

[12:33 uk ~]# yum update sm

Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Excluding mirror: updates.xcp-ng.org
 * xcp-ng-base: mirrors.xcp-ng.org
Excluding mirror: updates.xcp-ng.org
 * xcp-ng-linstor: mirrors.xcp-ng.org
Excluding mirror: updates.xcp-ng.org
 * xcp-ng-updates: mirrors.xcp-ng.org
No packages marked for update

ronan-a

@fred974 And rpm -qa | grep sm? Because the sm LINSTOR package update is in our repo. So I suppose you already installed it using koji URLs.

fred974

@ronan-a said in XOSTOR hyperconvergence preview:

@fred974 And sudo rpm -qa | grep sm? Because the sm LINSTOR package update is in our repo. So I suppose you already installed it using koji URLs.

microsemi-smartpqi-1.2.10_025-2.xcpng8.2.x86_64
smartmontools-6.5-1.el7.x86_64
sm-rawhba-2.30.7-1.3.0.linstor.7.xcpng8.2.x86_64
ssmtp-2.64-14.el7.x86_64
sm-cli-0.23.0-7.xcpng8.2.x86_64
sm-2.30.7-1.3.0.linstor.7.xcpng8.2.x86_64
libsmbclient-4.10.16-15.el7_9.x86_64
psmisc-22.20-15.el7.x86_64

Yes, I installed it from the koji URLs before seeing your rely

ronan-a

@fred974 I just repaired your pool, there was a small error in the conf that I gave in my previous post.

fred974

@ronan-a said in XOSTOR hyperconvergence preview:

I just repaired your pool, there was a small error in the conf that I gave in my previous post.

Thank you very much. I really appreciate you fixing this for me

Swen

@ronan-a said in XOSTOR hyperconvergence preview:

@Swen said in XOSTOR hyperconvergence preview:

@ronan-a perfect, thx! Is this the new release Olivier was talking about? Can you provide some information when to expect the first stable release?

If we don't have a new critical bug, normally in few weeks.

Fingers crossed!

Swen

@ronan-a: After doing the installation from scratch with new installed xcp-ng hosts, all uptodate, I need to do a repair (via xcp-ng center) of the SR after doing the xe sr-create, because the SR is in state: Broken and the pool-master is in state: Unplugged.

I am not really sure waht xcp-ng center is doing when I click repair, but it works.

I can reproduce this issue, it happens every installation.

regards,
Swen

olivierlambert

I don't remember if sr-create is also pluging the PBD by default

Repair is just a xe pbd-plug IIRC.

Swen

@olivierlambert it looks like sr-create is doing it, because on all other nodes the SR is attached, only on pool-master (or maybe the node you do the sr-create from) the pdb-plug does not work.

olivierlambert

What's the error message when you try to plug it?

Swen

@olivierlambert I need to me more clear about this: When doing the sr-create for the linstor storage no error is shown, but the pbd will not be plugged at the pool-master. On every other host in the cluster it works automatically. After doing a pdb-plug for the pool-master the SR will be plugged. No error is shown at all.

olivierlambert

Okay I see, thanks

Swen

Is there an easy way to map the linstor resource volume to the virtual disk on xcp-ng? When doing linstor volume list I get a Resource name back from linstor like this:

xcp-volume-23d07d99-9990-4046-8e7d-020bd61c1883

The last part looks like an uuid to me, but I am unable to find this uuid when using some xe commands.

Swen

@ronan-a: I am playing around with xcp-ng, linstor and Cloudstack. Sometimes when I create a new VM I run into this error: The VDI is not available
CS is trying it again after this error automatically and than it works and the new VM is starting. CS is using a template which is also on the linstor SR to create new VMs.
I attached the SMlog of the host.
SMlog.txt

ronan-a

@Swen After doing the installation from scratch with new installed xcp-ng hosts, all uptodate, I need to do a repair (via xcp-ng center) of the SR after doing the xe sr-create, because the SR is in state: Broken and the pool-master is in state: Unplugged.

I am not really sure waht xcp-ng center is doing when I click repair, but it works.

It's just a PBD plug call I suppose. Can you share your logs please?

ronan-a

@Swen said in XOSTOR hyperconvergence preview:

Is there an easy way to map the linstor resource volume to the virtual disk on xcp-ng? When doing linstor volume list I get a Resource name back from linstor like this:
xcp-volume-23d07d99-9990-4046-8e7d-020bd61c1883

The last part looks like an uuid to me, but I am unable to find this uuid when using some xe commands.

There is a tool installed by our RPMs to do that
For example on my host:

linstor-kv-tool -u xostor-2 -g xcp-sr-linstor_group_thin_device --dump-volumes -n xcp/volume
{
  "7ca7b184-ec9e-40bd-addc-082483f8e420/metadata": "{\"read_only\": false, \"snapshot_time\": \"\", \"vdi_type\": \"vhd\", \"snapshot_of\": \"\", \"name_label\": \"debian 11 hub disk\", \"name_description\": \"Created by XO\", \"type\": \"user\", \"metadata_of_pool\": \"\", \"is_a_snapshot\": false}", 
  "7ca7b184-ec9e-40bd-addc-082483f8e420/not-exists": "0", 
  "7ca7b184-ec9e-40bd-addc-082483f8e420/volume-name": "xcp-volume-12571cf9-1c3b-4ee9-8f93-f4d2f7ea6bd8"
}