XCP-ng host restarts at random intervals
-
We have released new patches last Friday, double check to be fully up to date and reboot
-
@christopher-petzel Sometimes this can happen if the host and VMs do not use the same NTPP server(s) or are not syncing properly with them, and therefore fail to keep the times all properly synchronized. I'd check to make sure all are in sync.
-
I also have the reboot problem.
It only occurs for me when a USB hard drive is connected.
If there is no hard drive connected to the USB interfaces, the system will run stable for months / years.Today I had to read data into a VM via USB hard drive, so I connected one.
I haven't had any problems during the data transfer so far. Only when the USB hard drive is no longer used and is still connected..Please check whether something is connected via USB on the systems that have the reboot problem.
I've had this problem on other systems too. But it never bothered me because I don't normally have anything connected to the USB ports.
I also had the reboot problem in earlier versions of xcp-ng or Xenserver and it also occurred on HP servers that I used before I switched to Supermicro.
I have been using Xenserver since version 5.0.
Mainboard: Supermicro H11SSL-i BIOS 2.4
CPU: Epyc 7551P -
@Toni said in XCP-ng host restarts at random intervals:
Please check whether something is connected via USB on the systems that have the reboot problem.
Hi! It's a community forum here
So it's a bit more up to you to demonstrate the bug by investigate a bit more and digging the logs, otherwise if you want an investigation on your setup, then pro support is more fit. If you want to take a look on what logs to check, take a look at https://docs.xcp-ng.org/troubleshooting/
