XO need to issue network rescan and MTU change and set management interface
-
@olivierlambert Windows Xen Center can do these things.... so should XO. Please direct me to the right way to do it if it exists... or it's a feature request.
XO needs to be able to issue a rescan for host network interfaces.
If you add or remove an physical the info is not updated (missing). Should be for host and/or pool:
xe pif-scan host-uuid=[uuid of the XenServer host]Also need to be able to change the interface MTU:
xe network-param-set uuid=[network-uuid] MTU=9000Also need to be able to set management interface. Just changing the interface IP address is not enough.
xe host-management-reconfigure pif-uuid=<PIF_UUID> -
@Andrew Hi Andrew,
For the refresh it's available on the Host > Network tab
-
@Darkbeldin I totally missed that.... I know I have used it before. It must be a long week already. Thanks.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login