NBD setup - No such item
-
@Tristis-Oris my iptable are
-P INPUT ACCEPT -P FORWARD ACCEPT -P OUTPUT ACCEPT -N RH-Firewall-1-INPUT -N xapi_nbd_input_chain -N xapi_nbd_output_chain -A INPUT -p tcp -m tcp --dport 10809 -j xapi_nbd_input_chain -A INPUT -p gre -j ACCEPT -A INPUT -j RH-Firewall-1-INPUT -A FORWARD -j RH-Firewall-1-INPUT -A OUTPUT -p tcp -m tcp --sport 10809 -j xapi_nbd_output_chain -A RH-Firewall-1-INPUT -i lo -j ACCEPT -A RH-Firewall-1-INPUT -p icmp -m icmp --icmp-type any -j ACCEPT -A RH-Firewall-1-INPUT -i xenapi -p udp -m udp --dport 67 -j ACCEPT -A RH-Firewall-1-INPUT -m conntrack --ctstate RELATED,ESTABLISHED -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m conntrack --ctstate NEW -m udp --dport 694 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m conntrack --ctstate NEW -m tcp --dport 22 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m conntrack --ctstate NEW -m tcp --dport 80 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m conntrack --ctstate NEW -m tcp --dport 443 -j ACCEPT -A RH-Firewall-1-INPUT -p tcp -m tcp --dport 21064 -j ACCEPT -A RH-Firewall-1-INPUT -p udp -m multiport --dports 5404,5405 -j ACCEPT -A RH-Firewall-1-INPUT -j REJECT --reject-with icmp-host-prohibited -A xapi_nbd_input_chain -i xenbr0 -m conntrack --ctstate NEW,ESTABLISHED -j ACCEPT -A xapi_nbd_input_chain -j REJECT --reject-with icmp-port-unreachable -A xapi_nbd_output_chain -o xenbr0 -j RETURN -A xapi_nbd_output_chain -j REJECT --reject-with icmp-port-unreachable
there is already a line for nbd
-
@florent everything is default except NBD rule. looks similar.
Chain INPUT (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 16 960 xapi_nbd_input_chain tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:10809 0 0 ACCEPT 47 -- * * 0.0.0.0/0 0.0.0.0/0 9872M 155T RH-Firewall-1-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:10809 /* NBD */ 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:10809 /* NBD */ Chain FORWARD (policy ACCEPT 0 packets, 0 bytes) pkts bytes target prot opt in out source destination 0 0 RH-Firewall-1-INPUT all -- * * 0.0.0.0/0 0.0.0.0/0 Chain OUTPUT (policy ACCEPT 22M packets, 34G bytes) pkts bytes target prot opt in out source destination 0 0 xapi_nbd_output_chain tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp spt:10809 4 240 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:10809 /* NBD */ 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 udp dpt:10809 /* NBD */ Chain RH-Firewall-1-INPUT (2 references) pkts bytes target prot opt in out source destination 341M 9622G ACCEPT all -- lo * 0.0.0.0/0 0.0.0.0/0 29 5104 ACCEPT icmp -- * * 0.0.0.0/0 0.0.0.0/0 icmptype 255 0 0 ACCEPT udp -- xenapi * 0.0.0.0/0 0.0.0.0/0 udp dpt:67 9530M 146T ACCEPT all -- * * 0.0.0.0/0 0.0.0.0/0 ctstate RELATED,ESTABLISHED 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 ctstate NEW udp dpt:694 1 52 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 ctstate NEW tcp dpt:22 65232 3914K ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 ctstate NEW tcp dpt:80 488K 29M ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 ctstate NEW tcp dpt:443 0 0 ACCEPT tcp -- * * 0.0.0.0/0 0.0.0.0/0 tcp dpt:21064 0 0 ACCEPT udp -- * * 0.0.0.0/0 0.0.0.0/0 multiport dports 5404,5405 588K 4800M REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-host-prohibited Chain xapi_nbd_input_chain (1 references) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- xenbr0 * 0.0.0.0/0 0.0.0.0/0 ctstate NEW,ESTABLISHED 16 960 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable Chain xapi_nbd_output_chain (1 references) pkts bytes target prot opt in out source destination 0 0 RETURN all -- * xenbr0 0.0.0.0/0 0.0.0.0/0 0 0 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable
-
after telnet request to 10809, rejected packages increased.
Chain xapi_nbd_input_chain (1 references) pkts bytes target prot opt in out source destination 0 0 ACCEPT all -- xenbr0 * 0.0.0.0/0 0.0.0.0/0 ctstate NEW,ESTABLISHED 17 1020 REJECT all -- * * 0.0.0.0/0 0.0.0.0/0 reject-with icmp-port-unreachable
-
if i have no errors during backup, it means XO didn't try to use NBD?
but at begining of each NBD backup i got +1 to iptables rejected list.
-
@Tristis-Oris said in NBD setup - No such item:
but at begining of each NBD backup i got +1 to iptables rejected list.
I think there is something with the network configuration, but I am far out of my element here .
-
@florent is it any requirements for network\switch etc. Any layers outside of Xen.
-
@Tristis-Oris it hae to let the encrypted traffic flow through the 10809 port. XO will connect directly to the hosts through NBD, not only to the master
-
@florent sounds pretty simple. Nothing at my network should block that traffic.
Anyway, if i got rejected packets at iptables - backup task try to connect NBD server. Then it can't do something, so i should get an error at XO, but it not happens.
-
No such item
task happens when host interface at statusnone
without IP. -
@olivierlambert i hope your vacation WAS good, be we are stuck a bit here
-
-
bump
-
-
once again i configured it on fresh, test cluster, and it working.
so it some problem with iptables on production. But it default, same 8.2.1 clean installation.
Both this hosts have only 1 connected link, so it both backup and management.
On prod i try empty default backup network, or NBD link network - no effect. So maybe it still going through managemnt link without NBD?aaaaand enabled NBD on Mng link - now it working. SO yes, it ignore specified backup link.
Or this option didn't work, because NBD now enabled only on Mng link, so it can't go through backup link. -
next weird thing.
i enabled NBD on all manage interfaces at all pools.
it working with CR backup, but shouldn't, at least because it no option to enable NBD.
it working with half of other delta backup tasks, but not for all. Main backup is still without nbd.
only idea, it probably because of 1 small pool with few vm, where i forget to enable NBD. so 1 VM without nbd, force it to work in usual mode?
-
@Tristis-Oris said in NBD setup - No such item:
next weird thing.
i enabled NBD on all manage interfaces at all pools.
it working with CR backup, but shouldn't, at least because it no option to enable NBD.
it working with half of other delta backup tasks, but not for all. Main backup is still without nbd.
only idea, it probably because of 1 small pool with few vm, where i forget to enable NBD. so 1 VM without nbd, force it to work in usual mode?
that is really puzzling. I don't forget this issue, but I don't have much idea of how to fix this
Did you add the preferNbd flag to the config files ?
-
@florent lets a brief summary.
nbd work only via management interface. If nbd enabled on any another interface and specified as pool backup interface, it don't work (the issue with blocked packets at iptables). That was a main reason of my problem.
For now i made it work at all my pools. Max single thread speed increased 80-90 > 140-150. At usual backup task (when daily delta very small) it show same 10-40Mb, because it done too fast. Average task time decreased fo about twice.
-
@Tristis-Oris said in NBD setup - No such item:
@florent lets a brief summary.
nbd work only via management interface. If nbd enabled on any another interface and specified as pool backup interface, it don't work (the issue with blocked packets at iptables). That was a main reason of my problem.
For now i made it work at all my pools. Max single thread speed increased 80-90 > 140-150. At usual backup task (when daily delta very small) it show same 10-40Mb, because it done too fast. Average task time decreased fo about twice.
That is really strange, but it is also useful. We'll try to see why , and update the doc accordingly
-
@florent also it works too good.
i don' used advanced mode for CR backup, so NBD is disabled for job.
but task is working with nbd)
-
that log appear again, without any actions from my side.