High Fan Speed Issue on Lenovo ThinkSystem Servers

olivierlambert

Yes, we'll evaluate how they fixed it without changing the whole ABI, which will cause to rebuild all the drivers.

vichutcheson

I found this forum while doing some research on the Lenovo fan speed issue, we have a few hundred MX630 & MX650 V3 Nodes.

Not if this applies for your situation - but you can use/upgrade the BMC to version 4.5.1 XCC Firmware and it should resolve your issue. We also found that upgrading to the "best recipe" for these nodes also fixed the issue. The latest "best recipe" has XCC version 5.1 and it also resolves the issue.

I've included the link to the download - you can upload it through the BMC portal and then update the XCC firmware.

https://datacentersupport.lenovo.com/us/en/downloads/DS569380

Hope this helps! FYI - we didn't have to adjust the UEFI firmware version.

-Vic

stormi

@vichutcheson We'll publish a fix anyway.

hrv3e

@stormi when will this be out? thank you

@stormi said in High Fan Speed Issue on Lenovo ThinkSystem Servers:

@vichutcheson We'll publish a fix anyway.

gduperrey

@hrv3e We currently have a kernel version, including a patch for this, waiting for testing. As soon as we have validated the rpm within our test environment, we will be able to make it available for validation through the xcp-ng-testing repo.

DeOccultist

@gduperrey Is this alternate kernel fix for the fans already released with the November patches for XCP-ng 8.2?
https://xcp-ng.org/blog/2024/11/15/november-2024-security-and-maintenance-update-for-xcp-ng-8-2-lts/

🔧 Update for alternate kernel

Backport of a fix to correct cooling fan rotation speed on some Lenovo servers.

gduperrey

@DeOccultist Yes kernel-alt already includes this patch, but if you are not using it already, we do not recommend doing so as it will possibly have other impacts on your infrastructure by using it.

Our tests were completed overnight. We should be able to offer you the "normal" kernel, integrating this patch, available for validation tests in the xcp-ng-testing repo in the coming hours.

gduperrey

The kernel RPM integrating the patch is now available on the xcp-ng-testing repo. So you can already upgrade and use it. To do this, here are the commands:

yum clean metadata --enablerepo=xcp-ng-testing
yum update kernel --enablerepo=xcp-ng-testing
reboot

It will be released to all our users in an upcoming security update or update train. We don't have a date yet.

olivierlambert

\o/

Andrew

@gduperrey (unrelated to this fan issue) I loaded the new standard 8.2 testing kernel on my NUC11 and it seems to boot a little faster and also no longer complains about some APIC devices.