NBD connection during backup
-
Remove the "backup network" entry to leave it as default, check that XO is connected in Settings/server to that mgmt IP of the host and try again.
-
that looks similar my problem https://xcp-ng.org/forum/topic/8336/nbd-setup-no-such-item
-
@olivierlambert Did that. No change.
-
Maybe @florent will know
-
@olivierlambert Here are the respective screenshots:
-
@manilx Found it.
The backup I had was "backup" not "delta".
Choosing delta and Advanced settings I can turn on NBD:
Turned on and all is well. Sorry for the confusion. My bad.
Backup speed doubled.
-
Ahhh !! Great news
I missed it myself, so no worries. So you went from which speed to which? -
O olivierlambert marked this topic as a question on
-
O olivierlambert has marked this topic as solved on
-
@olivierlambert 50-80MB/s to up to 160/180
-
Nice speed increase! Probably also with less CPU load on the Dom0 at the same time
-
@olivierlambert Haven't checked the CPU as CPU is never a problem on my load
But yes this speed is a lot better so I can backup more frequently (every 2hrs for the important VM's)Actually the speed on my homelab is faster than the ones we get at the enterprise with "real" hardware.
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login