XCP-ng 8.3 & AMD Firepro S7150x2
-
Hello,
I am trying in vain to get an "AMD Firepro S7150x2" to run on XCP-ng 8.3 (latest Release)My Hardware configuration:
Motherboard: ASUS TUF x670E-PLUS (Firmware: Version 3042 from 2024/10/22 )
BIOS settings:- CSM -> disabled
- SR-IOV -> enabled
- IOMMU from auto -> enabled
CPU: AMD Ryzen 9 7950X3D 16-Core Processor
Steps I have already done:
-
Installation of supplemental Pack "mxgpu-2.0.0.amd.iso"
-
Exclude Modules for initramfs:
echo "blacklist radeon" >> /etc/modprobe.d/blacklist.conf
echo "blacklist amdgpu" >> /etc/modprobe.d/blacklist.conf
echo "blacklist amdkfd" >> /etc/modprobe.d/blacklist.conf
--> rebuild initramfs -
Set Bootparameter in "grub2-efi.cfg":
/opt/xensource/libexec/xen-cmdline --set-dom0 "pci=realloc pci=assign-busses" -
Load "gim" Modules
-> kern.log output with errors (as file attached):
AMD_FIREPRO_gim_kern.txt
Does anyone have an idea where the problem could be?
Would be grateful for any help. -
Hi!
Have you read the release notes before going in 8.3?
https://docs.xcp-ng.org/releases/release-8-3/#amd-mxgpu-driver
-
@olivierlambert said in XCP-ng 8.3 & AMD Firepro S7150x2:
Have you read the release notes before going in 8.3?
Hello Olivier,
unfortunately not - do you think it makes sense to try the XCP-ng 8.2 version? -
Yes, I would try that first.