So one error I got was on a XO backup job from a VM I moved from an 8.1 pool to a my test 8.2RC pool.

Error: INTERNAL_ERROR((Failure "Expected string, got '{}'"))

Update: I get this error on a new backup job also. This is on XO from the sources, I'll test with XOA also.

Update: this is working from XOA, not sure why I got the error in XO (from sources)... and I got 86.73 MiB/s. Which I think is faster than 8.1.

Update: this is now working for XO (from the sources) after I updated to 5.70.0 / 5.74.0 thanks for the great products.

Shared nothing windows 10 Live migrations working well in my 2 hosts 8.2RC pool. both uefi VM and BIOS vm.

Can I upgrade from Citrix Xen Server 7.1? I have an old host running that that I can test with.

update: putting 8.2RC1 ISO on a USB stick and trying it

update (upgrade from 7.1 using 8.2RC1 iso):

1. on first boot of the install ISO I got a nominal error of

Installer mode (UEFI) is mismatched with target boot mode (legacy)

2. Booting the usb stick from non UEFI resolved this and I was able to preform the upgrade install, on first boot I saw error on the screen that sat there for a while but then the console came up after a couple mins

ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)

3. in XOA it says I need 1 patch but isn't showing a patch.
   

4. Installed Windows 10 from newest ISO, UEFI boot seems to be working well, installed Citrix Hypervisor PV Tools (managementagentx64.msi)

5. I noticed I can change the video resolution of my windows 10 VM from 1024x768? Any Idea how I fix this? (there was a post about needing to maybe change this in the UEFI settings but how do I get to those? (tried pressing a lot of F keys on boot and del and such)

Answer is here: https://xcp-ng.org/forum/topic/3498/windows-resolution-not-higher-than-1024x768/10

So one error I got was on a XO backup job from a VM I moved from an 8.1 pool to a my test 8.2RC pool.

Error: INTERNAL_ERROR((Failure "Expected string, got '{}'"))

Update: I get this error on a new backup job also. This is on XO from the sources, I'll test with XOA also.

Update: this is working from XOA, not sure why I got the error in XO (from sources)... and I got 86.73 MiB/s. Which I think is faster than 8.1.

Update: this is now working for XO (from the sources) after I updated to 5.70.0 / 5.74.0 thanks for the great products.

Shared nothing windows 10 Live migrations working well in my 2 hosts 8.2RC pool. both uefi VM and BIOS vm.

stormi yea, I wasn't concerned about it was just documenting how it's normal I guess. Actually it's a helpful error even because then I knew to boot the USB the legacy (non-uefi) way.

kevdog so in the hosts area it's listed as a private network (it has no PIF right now). In the Pool networks I can't edit the PIF or VLAN either.

Can I upgrade from Citrix Xen Server 7.1? I have an old host running that that I can test with.

update: putting 8.2RC1 ISO on a USB stick and trying it

update (upgrade from 7.1 using 8.2RC1 iso):

1. on first boot of the install ISO I got a nominal error of

Installer mode (UEFI) is mismatched with target boot mode (legacy)

2. Booting the usb stick from non UEFI resolved this and I was able to preform the upgrade install, on first boot I saw error on the screen that sat there for a while but then the console came up after a couple mins

ACPI BIOS Error (bug): Could not resolve [\_SB.PCI0.SAT0.SPT2._GTF.DSSP], AE_NOT_FOUND (20180810/psargs-330)

3. in XOA it says I need 1 patch but isn't showing a patch.
   

4. Installed Windows 10 from newest ISO, UEFI boot seems to be working well, installed Citrix Hypervisor PV Tools (managementagentx64.msi)

5. I noticed I can change the video resolution of my windows 10 VM from 1024x768? Any Idea how I fix this? (there was a post about needing to maybe change this in the UEFI settings but how do I get to those? (tried pressing a lot of F keys on boot and del and such)

Answer is here: https://xcp-ng.org/forum/topic/3498/windows-resolution-not-higher-than-1024x768/10

kevdog so let's say I want to connect WAN to eth0 for vlan 999 I don't see how to edit this in XO. I do see In XCP-ng Center it seems like I could change it that way. I guess my question is where do I go in XO for this.

olivierlambert i tried to upload a picture but I got this forum error

Something went wrong installing the "sharp" module /lib64/libz.so.1: version `ZLIB_1.2.9' not found (required by /usr/share/nginx/html/forum/node_modules/sharp/build/Release/../../vendor/lib/libpng16.so.16) - Remove the "node_modules/sharp" directory then run "npm install --ignore-scripts=false --verbose" and look for errors - Consult the installation documentation at https://sharp.pixelplumbing.com/install - Search for this error at https://github.com/lovell/sharp/issues

I have a network that I want to attach to a PIF and assign a vlan to but I can't edit it. Any ideas where I need to click or do I need to do this from cli? or something else?

olivierlambert ahh gotcha ok thanks for the info

Hi, I was wondering if there is a way for Continuous Replication to specify the source and destination host used for the transport. It looks like it just uses the masters by default?

tony It was just a one-off. I've been using XO for snapshots and delta backups and it's been working great. Even this 1 time the backups were still fine, it was just a GUI status and email issue I guess. I just rebooted my XO VM and everything was fine after that. After I rebooted the status was "interrupted" until the next time the job ran, and it ran fine.