8.3 netinstall
default boot options, no changes in BIOS.
USB with ISO did not work.
KVM with loaded ISO did the trick.
Wait long enough to make sure your ISO is uploaded fully.
Good luck!
8.3 netinstall
default boot options, no changes in BIOS.
USB with ISO did not work.
KVM with loaded ISO did the trick.
Wait long enough to make sure your ISO is uploaded fully.
Good luck!
@phil182182 We have done it on one EX130-S.
We had crashes with 8.2, but everything went fine with 8.3 Beta.
Online for about 1 month already with zero problems so far.
I suggest you to try the installation one more time with 8.3 Beta.
8.3 netinstall
default boot options, no changes in BIOS.
USB with ISO did not work.
KVM with loaded ISO did the trick.
Wait long enough to make sure your ISO is uploaded fully.
Good luck!
@phil182182 We have done it on one EX130-S.
We had crashes with 8.2, but everything went fine with 8.3 Beta.
Online for about 1 month already with zero problems so far.
I suggest you to try the installation one more time with 8.3 Beta.
Hello,
is Intel Xeon Gold 54XX "Sapphire Rapids" supported?
I have seen for example for XenServer this hotfix:
https://support.citrix.com/article/CTX477249/hotfix-xs82ecu1026-for-citrix-hypervisor-82-cumulative-update-1
Is XCP-NG 8.2 already compatible with "Sapphire Rapids" CPU?
Thank you.
Hi,
this command:
xenpm get-cpufreq-para
returns "failed to get cpufreq parameter" regardless of BIOS options, tried so many different options, but nothing.
(and command: xenpm start 1|grep "Avg freq" just returns a lot of Avg freq 64 KHz)
Does anyone have experience on how to enable this?
The CPU is capped to it's base frequency because of this.
CPU is Intel Xeon W-2145 CPU @ 3.70GHz.
Motherboard/BIOS is Supermicro X11SRA-F
I tried several different options in "Hardware PM state control (P-States)"
Also in "CPU C State control" (all disabled, all enabled, different options)
Turbo is enabled in BIOS and I there is no "bias" options in this BIOS.
Has anyone enabled turbo with success on similar or same hardware?
Thank you!