Topics created by Spunky_Surveyor

+1, that's the way to go 🙂

This is the date get from XAPI. If it was migrated from another host, you have the first time it was visible for this XAPI.

@julien-f It is likely a broken xva. I did interrupt those as they were exporting, however I was a bit confused as to why it was checked by a different backup task. In other words this screen clip is from a delta backup, not a xva export.

I was more expecting it to show up on the XVA export backup task.

@thenorthernlight So I was able to open up the host and remove all PCIE cards and riser cards. At a glace everything appears to have made proper contact, however after reseating the cards and booting again and sure enough it appears to work again. I did not have to run any testing in the bios although the server does do a pre boot inventory check each time for changes. Host is HPE Proliant DL380 G9.

@greg_e I just stick it in the host because i had empty x8 pci slot and i need the GPU right now all those GPU are actually used up. 🙂

It works for my use which is very basic 2D autocad.