[SOLVED] Just FYI: current update seams to break NUT dependancies

[rzr]

@FritzGerald said:

@rzr Just for curiosity.

As far as I understand you assess the risk as low for the nut package - and only for that - to use ci-repo. I am fine with that for my personal servers.

• Would you consider to integrate this into "stable" branch?

yes it's the plan, we usually test packages in ci repos for a couple of weeks and once we're happy of the packages set it goes to testing repo, then users can officially test it (and based on feedback (or absence of feedback) then everything lands in update repo after a week or more (it depends on risk or hurry)..

• What would be the next steps on our side to support this?

I think nothing should be done your side you did your job before the testing window, early feedback is always appreciated (as long people know what they are doing )

But If I were you, just to be safe i would keep trace of packages i have installed from ci or testing repo, in case anything is not going as expected, you can still reinstall those packages from update channel.

• How long would does that roughly take?

It depends usually a couple of weeks, but this next batch might be a bit longer because there is a long waited feature planned.

Check the future announcement in the forum.

Thank again!

thank you for the detailed howto, if there is traction for this feature maybe it worth documenting officially, I'll ask product managers.

[FritzGerald]

@rzr Great. Thank you!

[rzr]

Package landed in testing repo please check the related announcement:

https://xcp-ng.org/forum/topic/9964/xcp-ng-8-3-updates-announcements-and-testing/432

Then please confirm the issue is gone by editing post topic with "[SOLVED]" prefix

[cobordism]

Just for the record, I get the same snmp errors with OpenIPMI instead of nut.

# yum update --disablerepo=* --enablerepo=xcp-ng-base,xcp-ng-updates 
Loaded plugins: fastestmirror
Loading mirror speeds from cached hostfile
Excluding mirror: updates.xcp-ng.org
 * xcp-ng-base: mirrors.xcp-ng.org
Excluding mirror: updates.xcp-ng.org
 * xcp-ng-updates: mirrors.xcp-ng.org
Resolving Dependencies
--> Running transaction check
---> Package net-snmp.x86_64 1:5.7.2-52.1.xcpng8.3 will be updated
---> Package net-snmp.x86_64 1:5.9.3-8.1.xcpng8.3 will be an update
---> Package net-snmp-agent-libs.x86_64 1:5.7.2-52.1.xcpng8.3 will be updated
---> Package net-snmp-agent-libs.x86_64 1:5.9.3-8.1.xcpng8.3 will be an update
---> Package net-snmp-libs.x86_64 1:5.7.2-52.1.xcpng8.3 will be updated
--> Processing Dependency: libnetsnmp.so.31()(64bit) for package: OpenIPMI-2.0.23-2.el7.x86_64
---> Package net-snmp-libs.x86_64 1:5.9.3-8.1.xcpng8.3 will be an update
--> Finished Dependency Resolution
Error: Package: OpenIPMI-2.0.23-2.el7.x86_64 (@xcp-ng-base)
           Requires: libnetsnmp.so.31()(64bit)
           Removing: 1:net-snmp-libs-5.7.2-52.1.xcpng8.3.x86_64 (@xcp-ng-updates)
               libnetsnmp.so.31()(64bit)
           Updated By: 1:net-snmp-libs-5.9.3-8.1.xcpng8.3.x86_64 (xcp-ng-updates)
              ~libnetsnmp.so.40()(64bit)
           Available: 1:net-snmp-libs-5.7.2-33.el7_5.2.x86_64 (xcp-ng-base)
               libnetsnmp.so.31()(64bit)
           Available: 1:net-snmp-libs-5.7.2-51.1.xcpng8.3.x86_64 (xcp-ng-base)
               libnetsnmp.so.31()(64bit)
           Available: 1:net-snmp-libs-5.7.2-51.2.xcpng8.3.x86_64 (xcp-ng-base)
               libnetsnmp.so.31()(64bit)
           Available: 1:net-snmp-libs-5.7.2-51.3.xcpng8.3.x86_64 (xcp-ng-base)
               libnetsnmp.so.31()(64bit)

[rzr]

@cobordism said:

yum update --disablerepo=* --enablerepo=xcp-ng-base,xcp-ng-updates

It's currently in testing and will move to updates if everything (not only nut) is ok:

yum install --disablerepo=* \
   --enablerepo=xcp-ng-base,xcp-ng-updates,xcp-ng-testing  nut

[FritzGerald]

Hi, I just wanted to comment that the provided packages work for all my server. Thank you!

[Kajetan321]

@FritzGerald Thank you for taking the time to write up the install procedure. I was able to follow it on my end and it seems to be working. What commands do you use to set the three services to start up automatically at boot up? Right now if I reboot and run upsc apc@localhost it throws an error until I manually do:

upsdrvctl start
systemctl start nut-server.service
systemctl start nut-monitor.service

[FritzGerald]

@Kajetan321 Hi, sorry. I am away from office and I can't tell you that off the top of my head right now. I get back to you during the week.

[FritzGerald]

Hi @kajetan321, it has been a little while when setting this up. And I have to admit, that I am not sure weather the upcoming instructions are complete. So please take it as an indication:

#################################
Add Service for ups-driver
#################################

nano /etc/systemd/system/ups-driver.service

[Unit]
Description=NUT UPS Driver
After=network-online.target
Wants=network-online.target
Before=nut-server.service

[Service]
Type=oneshot
ExecStart=/usr/sbin/upsdrvctl start
ExecStop=/usr/sbin/upsdrvctl stop
RemainAfterExit=yes

[Install]
WantedBy=multi-user.target

###################################
Add Requirement for nut-server
#################################

mkdir -p /etc/systemd/system/nut-server.service.d
nano /etc/systemd/system/nut-server.service.d/ups-driver.conf

[Unit]
Requires=ups-driver.service
After=ups-driver.service

###################################
Add Requirement for nut monitor
#################################

mkdir -p /etc/systemd/system/nut-monitor.service.d
nano /etc/systemd/system/nut-monitor.service.d/nut-server.conf

[Unit]
Requires=nut-server.service
After=nut-server.service

###################################
Enable services
###################################

systemctl daemon-reload
systemctl enable ups-driver.service
systemctl enable nut-server.service
systemctl enable nut-monitor.service

systemctl start nut-monitor.service

###################################
Anaylze tools
###################################

systemctl list-dependencies nut-monitor.service
systemd-analyze critical-chain nut-monitor.service
systemctl show nut-monitor.service -p Requires -p Wants -p After
systemctl show nut-server.service -p Requires -p Wants -p After

Please let me know if it works, since I then would update my documentation above

[Kajetan321]

@FritzGerald Understood. Thanks for posting. I will get back to this as soon as I have some time.