Alert: Control Domain Memory Usage

stormi

Before I realized that not every affected host was using the ixgbe driver, contrarily to what I initially thought, I built an alternate driver from the latest sources from Intel.

So, even if there's little hope that it will fix anything, here's how to install it (on XCP-ng 8.1 or 8.2):

yum install intel-ixgbe-alt --enablerepo=xcp-ng-testing
reboot

olivierlambert

Do we asked to provide also lsmod? That might be interesting to overlap different results and see common ones.

stormi

@olivierlambert Yes, various users have shared their lsmod.

olivierlambert

The latest report was on a NFS storage, however lsmod displays various iSCSI modules loaded. So it doesn't mean it's not an iSCSI module issue:

scsi_mod              253952  13 fcoe,scsi_dh_emc,sd_mod,dm_multipath,scsi_dh_alua,scsi_transport_fc,libfc,bnx2fc,megaraid_sas,sg,scsi_dh_rdac,scsi_dh_hp_sw

edit: what about bnx2fc? Is it common to other reports?

edit 2: nope, might be megaraid_sas instead.

olivierlambert

Is there a way to provide alternate/up to date modules for the most suspicious ones? At some point, we'll find the culprit!

stormi

It depends how self-contained the modules are. For device drivers, it's usually feasible. For more core parts of the kernel, I think we should rather try to identify patches that look like they could fix the issue and rebuild the kernel with them.

We could also opt for a dichotomy approach between the main kernel and the alternate kernel, but since it takes days before one can be sure that there's no leak, it's not really doable, unless we find a way to reproduce the issue way faster (which is another thing in which users may help: try to provoke the memleak on purpose. High network load seems to be a lead.).

stormi

@olivierlambert said in Alert: Control Domain Memory Usage:

The latest report was on a NFS storage, however lsmod displays various iSCSI modules loaded. So it doesn't mean it's not an iSCSI module issue:

Isn't it SCSI rather than iSCSI here? However, maybe the leak is in SCSI layers indeed...

fasterfourier

I am seeing similar behavior with Citrix Hypervisor 8.2LTSR after upgrading from 7.1CU2, which was not affected. We have a pool with 5 Poweredge R730 hosts and 2 R720 hosts. All have Intel 10G and 1G NICs (ixgbe and igb drivers) and we use iSCSI storage. I have had two hosts use up all their control domain memory, requiring an evacuate/reboot of the host. One host was the pool master, which runs only one VM (xen orchestra appliance) but is generally busy with various iSCSI tasks due to snapshot coalesce after daily backups. The other host has ~20 VMs that are pretty busy with network activity. No userspace processes that seem to be using an abnormal amount of memory.

stormi

Thanks, this is good to have confirmation of what we thought about CH 8.2 but couldn't prove!

fasterfourier

@stormi I've just opened a Citrix case on the issue, but I wouldn't expect much help there, and definitely wouldn't expect anything quickly.

stormi

@fasterfourier Well, we've also tried to make the issue known to Citrix before so maybe your confirmation that it does not only happen in XCP-ng will be enough to trigger some movement about it. A memory leak that makes the host unusable is not a small issue.

fasterfourier

@stormi The ID for the case I just opened is 80240347. If you have a bugtracker issue open, you may want to mention that ticket. I just now opened the ticket, though, so it will be a while before it makes its way out of tier 1, etc.

EDIT: Had the wrong case number at first. Updated case number.

borzel

We also have an issue with growing control domain memory:

XCP-ng 8.2
NFS shared storage
the poolmaster (xen19 is one of them) are more affected than pool members

Today I install the alternate kernel on one of our poolmaster to see if that resolves our issue.

borzel

I noticed in my monitoring graphs, that since we have this issue, the SWAP is not used like before the issue:

borzel

looked in my yum.log on this server (xen19):

our problems startet exactly since "Apr 10 18:10:29 Installed: kernel-4.19.19-6.0.10.1.xcpng8.1.x86_64"

yum.log.4.gz:Oct 03 17:35:54 Installed: kernel-4.4.52-4.0.7.1.x86_64
yum.log.4.gz:Nov 20 18:29:29 Updated: kernel-4.4.52-4.0.12.x86_64
yum.log.2.gz:Oct 10 20:19:31 Updated: kernel-4.4.52-4.0.13.x86_64
yum.log.1:Apr 10 18:10:29 Installed: kernel-4.19.19-6.0.10.1.xcpng8.1.x86_64
yum.log.1:Jul 07 17:46:34 Updated: kernel-4.19.19-6.0.11.1.xcpng8.1.x86_64
yum.log.1:Dec 10 17:59:07 Updated: kernel-4.19.19-6.0.12.1.xcpng8.1.x86_64
yum.log.1:Dec 19 13:53:39 Updated: kernel-4.19.19-6.0.13.1.xcpng8.1.x86_64
yum.log.1:Dec 19 13:55:20 Updated: kernel-4.19.19-7.0.9.1.xcpng8.2.x86_64
yum.log:Jan 18 17:35:07 Installed: kernel-alt-4.19.142-1.xcpng8.2.x86_64

r1

@borzel How frequently do you restart VMs? And what's the last dom-id? # xl list

borzel

@r1 in general we do not restart many of our VMs, its all very static, only manual operated

xen19 is now rebootet (we need it in production) with kernel-alt - highest id is currently 4

xen22 (pool master of another affected pool) - highest id is curently 30

memory graphs of xen22

yum.log of xen22 (Problem here also after installing kernel-4.19.19-6.0.10.1.xcpng8.1.x86_64)

yum.log.5.gz:Dec 19 00:52:47 Updated: kernel-4.4.52-4.0.12.x86_6
yum.log.3.gz:Nov 08 10:07:40 Updated: kernel-4.4.52-4.0.13.x86_64
yum.log.1:Apr 10 20:31:01 Installed: kernel-4.19.19-6.0.10.1.xcpng8.1.x86_64
yum.log.1:Aug 31 23:10:50 Updated: kernel-4.19.19-6.0.11.1.xcpng8.1.x86_64
yum.log.1:Dec 11 18:00:54 Updated: kernel-4.19.19-6.0.12.1.xcpng8.1.x86_64
yum.log.1:Dec 19 12:52:00 Updated: kernel-4.19.19-6.0.13.1.xcpng8.1.x86_64
yum.log.1:Dec 19 12:54:13 Updated: kernel-4.19.19-7.0.9.1.xcpng8.2.x86_64

r1

@borzel Between 4.19.19-6.0.9 to 4.19.19-6.0.10, following two patches were added.

0001-block-cleanup-__blkdev_issue_discard.patch
0001-block-fix-32-bit-overflow-in-__blkdev_issue_discard.patch

Both are well vetted and seems stable without any further changes in them. Was there anything else updated along with kernel?

borzel

@r1 yes, ever line "installed" in yum.log is an Upgrade from XCP-ng.
Problems started with XCP-ng 8.x

stormi

@borzel did you "yum upgrade" from 7.x from 8.x?