XCP-ng 8.2 updates announcements and testing

hecki

@stormi I alwas used the rolling pool update since its available so i did not read the docs since then any more. If I understand you correct, until now the rolling pool update does not do a toolstack restart during the node restarts although it is so important?

stormi

@hecki In the case of Rolling Pool Update it's not a matter of toolstack restart anymore but rather of updating and rebooting hosts one by one rather than all at once.

hecki

@stormi ok, so "Install pool patches" and "Rolling pool update" internally behave completely different. This is new for me, until now, i thought, the Rolling Pool Update is a "Install poool patches" with following evacuation and reboot of the nodes, so thats what I have done manually today. Thanks for the explanation ...

stormi

@hecki That's what it was (with extra steps also such as putting hosts in maintenance mode), but this will change in the next release of Xen Orchestra as Rolling Pool Update will now evacuate, update then reboot every host one by one

NielsH

Looks like yet another security patch from Xenserver available now

https://xenbits.xen.org/xsa/advisory-398.html

stormi

@NielsH No, they just updated the existing advisory. See "UPDATES IN VERSION 2".

NielsH

@stormi Ah phew, good to hear we won't have to update everything so quickly again

stormi

New security updates (xen, Intel microcode)

Impact: host crash by exploiting PCI passthrough from a VM

Citrix' security bulletin: https://support.citrix.com/article/CTX390511

Test on XCP-ng 8.2

From an up to date host:

yum clean metadata --enablerepo=xcp-ng-testing
yum update xen-dom0-libs xen-dom0-tools xen-hypervisor xen-libs xen-tools --enablerepo=xcp-ng-testing
reboot

Versions:

xen-*: 4.13.4-9.21.1.xcpng8.2

What to test

Normal use and anything else you want to test. The closer to your actual use of XCP-ng, the better.

Test window before official release of the updates

~2 days.

olivierlambert

Tested here on one home lab machine, it works

Andrew

@stormi Post update, things are working as normal on my hosts.

HeMaN

updated and all fine

JeffBerntsen

@stormi Seems to be working well for me too.

stormi

Thanks for your tests. Xen developers have found an issue in the patches so I will provide a new test package when ready. The issue is rather specific so I doubt your hosts will be affected, but if you prefer to revert you can with: yum downgrade "xen-*".

stormi

So, new packages are now available for this security update, which now have fixes for the regressions the previous fixes caused.

Note that you were really unlikely to be directly affected by those regressions. They have been detected by code analysis tools, but all other CI tests did already pass with the previous update (Xen's CI, Citrix' CI, XCP-ng's CI).

Install the update with:

yum clean metadata --enablerepo=xcp-ng-testing
yum update xen-dom0-libs xen-dom0-tools xen-hypervisor xen-libs xen-tools --enablerepo=xcp-ng-testing
reboot

Version for xen-*: 4.13.4-9.21.1.xcpng8.2

If I could get feedback on it within 24h, this would be wonderful.

olivierlambert

Tested and OK here

Andrew

@stormi Updates ran fine. Systems seem to be working.

theAeon

just joining the crowd of "seems fine"

stormi

Thank you everyone.

The update is published: https://xcp-ng.org/blog/2022/04/11/april-2022-security-update/

gduperrey

New updates (xen, Intel & AMD microcode)

Update the Intel microcode for the "IPU 2022.1" vulnerability (and other vulnerabilities and bugs)
- "A potential security vulnerability in some Intel Processors may allow information disclosure. Intel is releasing firmware updates to mitigate this potential vulnerability."
- See https://www.intel.com/content/www/us/en/security-center/advisory/intel-sa-00617.html
Update AMD microcode for Fam17h and Fam19h
Citrix also released an update for Xen. As we had already anticipated the patches they added (that fixed regressions introduced by the fixes to the XSA-400 vulnerabilities), it does not change anything for XCP-ng. We synced our RPM with theirs anyway to make future updates easier.

Citrix' hotfix: https://support.citrix.com/article/CTX459703