Exports OVA Timeout...

florent

@chelle_belle can you test this branch : fix_ova_speed

there will still have a pause after the 5kb and after each disk, but it should speed up things . I will look for other performance optimization during this sprint.

Andrew

@florent That branch is a LOT faster for OVA export but does not compress the data as much.

XVA/NoComp 40 seconds to complete. 1760MB
XVA/Zstd 30 seconds to complete. 560MB
XVA/gzip 90 seconds to complete. 586MB
New OVA 40 seconds to start, 60 seconds to download. 1570MB
Old OVA 6 minutes to start, 6 minutes to download. 597MB

It still leaves a zombie task....

[XO] VM OVA export (TestSmall7-64 on xcp1) 0%

olivierlambert

Thanks for your feedback @Andrew as usual

olivierlambert

Ah I see, @florent just disabled compression entirely to see the diff, so maybe using compression level to 1 will be better while keeping that speed

Andrew

@olivierlambert I see that now...

I guess the best choice would to have an option during export like with XVA. Quick-NoComp OR Slow-Compression. It could also be applied to export disk function.

I tried 1 but it did not seem to change the size of time. Maybe I did not change it correctly.

I guess technically the no-compression option could stream the data without the pre-calculation work for compression that takes time but is no longer needed.

olivierlambert

Maybe try 6? Don't forget to rebuild after that

Andrew

@olivierlambert @florent My mistake.... I did not rebuild XO correctly.

Using level 1 is about 1 minute to start and about 1 minute to download and was 637MB. Seems to be a reasonable tradeoff for a significant increase in speed (over level 9) and a minimal decrease in compression.

So level 0 (no compression) actually does not help unless the code is modified to just stream the data without the pre-calculation and would cut the export time in half (no scanning/calculation needed).

Level 1 is reasonable if it the current procedure is maintained. Level 9 should be optional but not forced. Level 9 is very slow.... If compression is left in place then it would be nice to have some options.... 1..3..6..9... Or some names (min=1, fast=3, standard=6, max=9).

The quickest change is to just make it level 1. That still offers compression and still takes time but is MUCH faster and I think that's what most people want. speed...speed....speed....

olivierlambert

Sounds a good modification to do in the short term until make it editable indeed

@chelle_belle if you need assistance so we can configure it this way on your XOA, let me know

chelle_belle

@olivierlambert - I'm struggling to switch to the channel and do the update. When I got to set it I get this error message:

06/06/2022, 17:07:33: Start updating...
06/06/2022, 17:07:33: No manifest found for fix_ova_speed channel.

I assumed I had to switch to "Unlisted Channel" and then input fix_ova_speed as the Unlisted channel name...

olivierlambert

@chelle_belle a release channel is not the branch on Github, which can be used only if you installed XO from the sources (https://xen-orchestra.com/docs/installation.html#from-the-sources).

In theory, we could build packages to match such a release channel, but it's not trivial on our side. It might be easier to just install XO from the sources and not using master branch but fix_ova_speed. If you need assistance on doing that, I'm here

florent

@chelle_belle If you can open a support tunnel I can deploy the fix today ( with a more reasonable compression level of 1 , thanks @Andrew )

Can you open a support ticket with the tunnel information ?

Andrew

@florent @julien-f Trying the new OVA export (XO source commit c11e0)..... I exported a VM quickly and without a zombie task left over (good), but then I tried to import it and got no error when clicking import but it did nothing (failure without notice). The logs do show an error:

HTTP handler of vm.import
undefined
{
  "code": "INTERNAL_ERROR",
  "params": [
    "(Failure \"Expected string, got 'N'\")"
  ],
  "call": {
    "method": "VM.create",
    "params": [
      {
        "actions_after_crash": "restart",
        "actions_after_reboot": "restart",
        "actions_after_shutdown": "destroy",
        "affinity": null,
        "HVM_boot_params": {
          "order": "cdn"
        },
        "HVM_boot_policy": "BIOS order",
        "is_a_template": false,
        "memory_dynamic_max": 4294967296,
        "memory_dynamic_min": 4294967296,
        "memory_static_max": 4294967296,
        "memory_static_min": 4294967296,
        "other_config": {
          "vgpu_pci": "",
          "base_template_name": "Other install media",
          "install-methods": "cdrom"
        },
        "PCI_bus": "",
        "platform": {
          "timeoffset": "0",
          "nx": "true",
          "acpi": "1",
          "apic": "true",
          "pae": "true",
          "hpet": "true",
          "viridian": "true"
        },
        "PV_args": "",
        "PV_bootloader_args": "",
        "PV_bootloader": "",
        "PV_kernel": "",
        "PV_legacy_args": "",
        "PV_ramdisk": "",
        "recommendations": "<restrictions><restriction field=\"memory-static-max\" max=\"137438953472\" /><restriction field=\"vcpus-max\" max=\"32\" /><restriction property=\"number-of-vbds\" max=\"255\" /><restriction property=\"number-of-vifs\" max=\"7\" /><restriction field=\"has-vendor-device\" value=\"false\" /></restrictions>",
        "user_version": 1,
        "VCPUs_at_startup": 2,
        "VCPUs_max": 2,
        "VCPUs_params": {},
        "blocked_operations": {},
        "has_vendor_device": false,
        "HVM_shadow_multiplier": 1,
        "name_description": "",
        "name_label": "NginX Test (ova)",
        "order": 0,
        "shutdown_delay": 0,
        "start_delay": 0,
        "version": 0
      }
    ]
  },
  "message": "INTERNAL_ERROR((Failure \"Expected string, got 'N'\"))",
  "name": "XapiError",
  "stack": "XapiError: INTERNAL_ERROR((Failure \"Expected string, got 'N'\"))
    at Function.wrap (/opt/xo/xo-builds/xen-orchestra-202206091200/packages/xen-api/src/_XapiError.js:16:12)
    at /opt/xo/xo-builds/xen-orchestra-202206091200/packages/xen-api/src/transports/json-rpc.js:37:27
    at AsyncResource.runInAsyncScope (node:async_hooks:202:9)
    at cb (/opt/xo/xo-builds/xen-orchestra-202206091200/node_modules/bluebird/js/release/util.js:355:42)
    at tryCatcher (/opt/xo/xo-builds/xen-orchestra-202206091200/node_modules/bluebird/js/release/util.js:16:23)
    at Promise._settlePromiseFromHandler (/opt/xo/xo-builds/xen-orchestra-202206091200/node_modules/bluebird/js/release/promise.js:547:31)
    at Promise._settlePromise (/opt/xo/xo-builds/xen-orchestra-202206091200/node_modules/bluebird/js/release/promise.js:604:18)
    at Promise._settlePromise0 (/opt/xo/xo-builds/xen-orchestra-202206091200/node_modules/bluebird/js/release/promise.js:649:10)
    at Promise._settlePromises (/opt/xo/xo-builds/xen-orchestra-202206091200/node_modules/bluebird/js/release/promise.js:729:18)
    at _drainQueueStep (/opt/xo/xo-builds/xen-orchestra-202206091200/node_modules/bluebird/js/release/async.js:93:12)
    at _drainQueue (/opt/xo/xo-builds/xen-orchestra-202206091200/node_modules/bluebird/js/release/async.js:86:9)
    at Async._drainQueues (/opt/xo/xo-builds/xen-orchestra-202206091200/node_modules/bluebird/js/release/async.js:102:5)
    at Immediate.Async.drainQueues [as _onImmediate] (/opt/xo/xo-builds/xen-orchestra-202206091200/node_modules/bluebird/js/release/async.js:15:14)
    at processImmediate (node:internal/timers:466:21)
    at process.callbackTrampoline (node:internal/async_hooks:130:17)"
}

julien-f

@Andrew This problem does not happen before the last 3 commits?

I believe the issue is the affinity: null, but I don't see how it can be related to these changes.

julien-f

Probably related to https://github.com/vatesfr/xen-orchestra/commit/2af5328a0f69912f5c03f5a8894fd75633bd3655

0

julien-f committed to vatesfr/xen-orchestra

chore(xo-server): use @xen-orchestra/xapi/VM_create

julien-f

@Andrew Should be fixed, please test and keep me posted

https://github.com/vatesfr/xen-orchestra/commit/83690a4dd4457daf9ea402e623c9f3fe9ce9ab7f

0

julien-f committed to vatesfr/xen-orchestra

fix(xo-server/_importOvaVm): fix VM creation

Fixes https://xcp-ng.org/forum/post/49920

Introduced by 2af5328a0f69912f5c03f5a8894fd75633bd3655

Andrew

@julien-f Still an issue... Two steps forward, one step back (commit 83690).

Import now starts, no error, but it does not finish.

The task is started, the VM is created, the data is uploaded, the task exits, but the import page does not finish and the VM name is left as [Importing...] NginX Test. No logs in the UI.

I can force start the VM, so it looks like the data is ok.

florent

@Andrew I am reproducing the problem : if the VM has mulitple disks, the import only handle the first one and freeze

olivierlambert

@Andrew do you have more than 1 disk in your test VM?

Andrew

@olivierlambert No. Just one disk.

Andrew

@florent The only thing I see in the log is: yielded last VMDK block