Tips on installing XO
-
@Danp, Yes. I read.
These were questions that I had asked before and no one answered:
1- Should I run the commands as root or sudo?2- Which directory is suitable to clone XO? I want to clone it in the /usr/local/src directory and this requires administrative access.
-
Hello,
I cloned the repository Jarli01/xenorchestra_installer. I then tried to install it using thebash xo_install.shcommand, but I got the following error:Cloning into 'xen-orchestra'... remote: Enumerating objects: 128131, done. remote: Counting objects: 100% (4123/4123), done. remote: Compressing objects: 100% (1937/1937), done. error: RPC failed; curl 92 HTTP/2 stream 5 was not closed cleanly: CANCEL (err 8) error: 611 bytes of body are still expected fetch-pack: unexpected disconnect while reading sideband packet fatal: early EOF fatal: fetch-pack: invalid index-pack output xo_install.sh: line 50: cd: /opt/xen-orchestra: No such file or directory yarn install v1.22.22 info No lockfile found. [1/4] Resolving packages... [2/4] Fetching packages... [3/4] Linking dependencies... [4/4] Building fresh packages... success Saved lockfile. Done in 0.17s. yarn run v1.22.22 error Couldn't find a package.json file in "/opt" info Visit https://yarnpkg.com/en/docs/cli/run for documentation about this command. xo_install.sh: line 54: cd: packages/xo-server: No such file or directory cp: cannot stat 'sample.config.toml': No such file or directory ls: cannot access '/opt/xen-orchestra/packages/xo-server-*': No such file or directory Created symlink /etc/systemd/system/multi-user.target.wants/xo-server.service ā /lib/systemd/system/xo-server.service. Installation complete, open a browser to: 172.20.2.56 Default Login:admin@admin.net Password:admin Don't forget to change your password! -
@jasonnix you should report 3rd party script issues where they are built, eg https://github.com/Jarli01/xenorchestra_installer
The community forums are meant to deal with the documented way to install XO
-
@jasonnix Looks like you had an issue during the attempt to
git clonethe XO repository, which would explain why the directory was subsequently not found. I would recommend retrying the install using a fresh VM. -
Hi @Danp,
Thank you so much for your reply.
I installed a new VM and cloned the repository manually. It has been at this stage for hours:# yarn yarn install v1.22.22 [1/5] Validating package.json... [2/5] Resolving packages... [3/5] Fetching packages... [4/5] Linking dependencies... warning "@commitlint/cli > @commitlint/load > cosmiconfig-typescript-loader@5.0. 0" has unmet peer dependency "@types/node@*". warning "@commitlint/cli > @commitlint/load > cosmiconfig-typescript-loader@5.0. 0" has unmet peer dependency "typescript@>=4". warning "@vue/eslint-config-typescript > @typescript-eslint/eslint-plugin > ts-a pi-utils@1.3.0" has unmet peer dependency "typescript@>=4.2.0". warning "workspace-aggregator-832699f2-72dd-4d94-b7ec-a6f4c545ea40 > @vates/even t-listeners-manager > tap > @tapjs/test > @isaacs/ts-node-temp-fork-for-pr-2009@ 10.9.5" has unmet peer dependency "@types/node@*". warning "workspace-aggregator-832699f2-72dd-4d94-b7ec-a6f4c545ea40 > @vates/even t-listeners-manager > tap > @tapjs/asserts > tcompare > react-element-to-jsx-str ing@15.0.0" has unmet peer dependency "react@^0.14.8 || ^15.0.1 || ^16.0.0 || ^1 7.0.1 || ^18.0.0". warning "workspace-aggregator-832699f2-72dd-4d94-b7ec-a6f4c545ea40 > @vates/even t-listeners-manager > tap > @tapjs/asserts > tcompare > react-element-to-jsx-str ing@15.0.0" has unmet peer dependency "react-dom@^0.14.8 || ^15.0.1 || ^16.0.0 | | ^17.0.1 || ^18.0.0". warning Workspaces can only be enabled in private projects. [5/5] Building fresh packages... [13/21] ā argon2 [-/21] ā” waiting... [-/21] ā” waiting... [-/21] ā” waiting... [-/21] ā” waiting... -
@jasonnix There are several instance in this thread where the errors you encounter appear to be network related. Do you regularly have issues with your internet connection? Are you still using Debian 12 as the base OS?
-
Hi @Danp,
Yes, I'm using Debian. I got the following results:# yarn yarn install v1.22.22 [1/5] Validating package.json... [2/5] Resolving packages... success Already up-to-date. $ husky install husky - Git hooks installed Done in 3.98s. # # yarn build yarn run v1.22.22 $ TURBO_TELEMETRY_DISABLED=1 turbo run build --scope xo-server --scope xo-server-'*' --scope xo-web WARNING --scope is deprecated and will be removed in 2.0 ā¢ Packages in scope: xo-server, xo-server-audit, xo-server-auth-github, xo-server-auth-google, xo-server-auth-ldap, xo-server-auth-oidc, xo-server-auth-saml, xo-server-backup-reports, xo-server-load-balancer, xo-server-netbox, xo-server-perf-alert, xo-server-sdn-controller, xo-server-test, xo-server-test-plugin, xo-server-transport-email, xo-server-transport-icinga2, xo-server-transport-nagios, xo-server-transport-slack, xo-server-transport-xmpp, xo-server-usage-report, xo-server-web-hooks, xo-web ā¢ Running build in 22 packages ā¢ Remote caching disabled Tasks: 25 successful, 25 total Cached: 0 cached, 25 total Time: 4m4.224s Done in 244.88s. # # npm install forever -g npm warn deprecated inflight@1.0.6: This module is not supported, and leaks memory. Do not use it. Check out lru-cache if you want a good and tested way to coalesce async requests by a key value, which is much more comprehensive and powerful. npm warn deprecated glob@7.2.3: Glob versions prior to v9 are no longer supported npm warn deprecated urix@0.1.0: Please see https://github.com/lydell/urix#deprecated npm warn deprecated source-map-url@0.4.1: See https://github.com/lydell/source-map-url#deprecated npm warn deprecated resolve-url@0.2.1: https://github.com/lydell/resolve-url#deprecated npm warn deprecated rimraf@2.7.1: Rimraf versions prior to v4 are no longer supported npm warn deprecated source-map-resolve@0.5.3: See https://github.com/lydell/source-map-resolve#deprecated npm warn deprecated chokidar@2.1.8: Chokidar 2 does not receive security updates since 2019. Upgrade to chokidar 3 with 15x fewer dependencies added 282 packages in 1m 45 packages are looking for funding run `npm fund` for details # # yarn global add forever yarn global v1.22.22 [1/4] Resolving packages... warning forever > forever-monitor > chokidar@2.1.8: Chokidar 2 does not receive security updates since 2019. Upgrade to chokidar 3 with 15x fewer dependencies warning forever > forever-monitor > chokidar > fsevents@1.2.13: The v1 package contains DANGEROUS / INSECURE binaries. Upgrade to safe fsevents v2 warning forever > forever-monitor > chokidar > braces > snapdragon > source-map-resolve@0.5.3: See https://github.com/lydell/source-map-resolve#deprecated warning forever > flatiron > prompt > utile > rimraf@2.7.1: Rimraf versions prior to v4 are no longer supported warning forever > forever-monitor > chokidar > braces > snapdragon > source-map-resolve > resolve-url@0.2.1: https://github.com/lydell/resolve-url#deprecated warning forever > forever-monitor > chokidar > braces > snapdragon > source-map-resolve > source-map-url@0.4.1: See https://github.com/lydell/source-map-url#deprecated warning forever > forever-monitor > chokidar > braces > snapdragon > source-map-resolve > urix@0.1.0: Please see https://github.com/lydell/urix#deprecated warning forever > flatiron > prompt > utile > rimraf > glob@7.2.3: Glob versions prior to v9 are no longer supported warning forever > flatiron > prompt > utile > rimraf > glob > inflight@1.0.6: This module is not supported, and leaks memory. Do not use it. Check out lru-cache if you want a good and tested way to coalesce async requests by a key value, which is much more comprehensive and powerful. [2/4] Fetching packages... [3/4] Linking dependencies... [4/4] Building fresh packages... success Installed "forever@4.0.3" with binaries: - forever Done in 31.95s. # # yarn global add forever-service yarn global v1.22.22 [1/4] Resolving packages... warning forever-service > swig@1.4.2: This package is no longer maintained [2/4] Fetching packages... [3/4] Linking dependencies... [4/4] Building fresh packages... success Installed "forever-service@0.5.11" with binaries: - forever-service - get-forever-config Done in 8.61s. # # forever-service install orchestra -r xo -s dist/cli.mjs forever-service version 0.5.11 Platform - Debian GNU/Linux 12 (bookworm) orchestra provisioned successfully Commands to interact with service orchestra Start - "sudo service orchestra start" Stop - "sudo service orchestra stop" Status - "sudo service orchestra status" Restart - "sudo service orchestra restart" # # /sbin/service orchestra start # # /sbin/service orchestra status ā orchestra.service - LSB: forever-service startup script for orchestra Loaded: loaded (/etc/init.d/orchestra; generated) Active: active (exited) since Tue 2024-05-28 00:14:36 PDT; 13s ago Docs: man:systemd-sysv-generator(8) Process: 45721 ExecStart=/etc/init.d/orchestra start (code=exited, status=0/SUCCESS) CPU: 33ms May 28 00:14:34 XO systemd[1]: Starting orchestra.service - LSB: forever-service startup script for orchestra... May 28 00:14:35 XO orchestra[45721]: Starting orchestra May 28 00:14:36 XO systemd[1]: Started orchestra.service - LSB: forever-service startup script for orchestra.But:
# ss -tupln Netid State Recv-Q Send-Q Local Address:Port Peer Address:Port Process udp UNCONN 0 0 0.0.0.0:111 0.0.0.0:* users:(("rpcbind",pid=16688,fd=5),("systemd",pid=1,fd=66)) udp UNCONN 0 0 [::]:111 [::]:* users:(("rpcbind",pid=16688,fd=7),("systemd",pid=1,fd=68)) tcp LISTEN 0 128 0.0.0.0:22 0.0.0.0:* users:(("sshd",pid=10085,fd=3)) tcp LISTEN 0 4096 0.0.0.0:111 0.0.0.0:* users:(("rpcbind",pid=16688,fd=4),("systemd",pid=1,fd=58)) tcp LISTEN 0 511 127.0.0.1:6379 0.0.0.0:* users:(("redis-server",pid=40261,fd=6)) tcp LISTEN 0 128 [::]:22 [::]:* users:(("sshd",pid=10085,fd=4)) tcp LISTEN 0 4096 [::]:111 [::]:* users:(("rpcbind",pid=16688,fd=6),("systemd",pid=1,fd=67)) tcp LISTEN 0 511 [::1]:6379 [::]:* users:(("redis-server",pid=40261,fd=7))No service runs on Potter 80!
-
@jasonnix You didn't answer my question about your internet connection, so I'm going to assume the answer is "yes".
Also, you should reread the documentation on adding the forever service because that isn't the proper method. Seems like we went over this several months ago.
-
Hi @Danp,
I followed the documentation and as you can see I have installed theforeverservice. -
@jasonnix said in Tips on installing XO:
Hi @Danp,
I followed the documentation and as you can see I have installed theforeverservice.I don't recall the documentation telling you to run
npm install forever -g.
I can't recall if it was in this thread, but I previously mentioned that I've never actually used this service. If I get some time, I'll try building a VM from scratch and give
forevera try. -
Hi @Danp,
In the Always Running section, when you click on forever, you will go to the Github address and it is written there. -
@jasonnix AFAIK, that command isn't part of our documentation and it shouldn't be needed.
-
@Danp, does this cause a problem?
-
@jasonnix No idea since I haven't worked with this service.
-
This post is deleted! -
I've acctually got a PR to help solve the documentation regarding the yarn forever part. Since I never could get that to work, I implemented a systemd variant instead.
Ping @olivierlambert for visibility
