XCP-ng
    • Categories
    • Recent
    • Tags
    • Popular
    • Users
    • Groups
    • Register
    • Login

    Test results for Dell Poweredge R770 with NVMe drives

    Scheduled Pinned Locked Moved Hardware
    31 Posts 8 Posters 5.9k Views 7 Watching
    Loading More Posts
    • Oldest to Newest
    • Newest to Oldest
    • Most Votes
    Reply
    • Reply as topic
    Log in to reply
    This topic has been deleted. Only users with topic management privileges can see it.
    • DanpD Offline
      Danp Pro Support Team @MarcVdS
      last edited by

      @MarcVdS The new ISO is already available. See this post for more details.

      M 1 Reply Last reply Reply Quote 0
      • M Offline
        MarcVdS @Danp
        last edited by

        @Danp
        OK thx, will test that right away!

        1 Reply Last reply Reply Quote 1
        • Y Offline
          yllar
          last edited by yllar

          Tested the newest iso (xcp-ng-8.3.0-20250606.2.iso) with Dell R770 and Broadcom 57508 100GbE QSFP56 Dual Port Adapter, PCIe Full Height

          It still fails to recognize the NIC, relevant log lines:

          [ 57.592461] Broadcom NetXtreme-C/E/S driver bnxt_en v1.10.3-232.0.155.5+
          [ 61.400879] bnxt_en 0001:5c:00.0 (unnamed net_device) (uninitialized): Firmware not responding, rc: -16 status: 0x8000
          [ 61.421312] bnxt_en: probe of 0001:5c:00.0 failed with error -16

          By the way, it works ok with 8.2.1 iso

          1 Reply Last reply Reply Quote 0
          • olivierlambertO Offline
            olivierlambert Vates 🪐 Co-Founder CEO
            last edited by

            That's interesting 🤔 Is your firmware fully up to date on the NIC?

            Y 1 Reply Last reply Reply Quote 0
            • Y Offline
              yllar @olivierlambert
              last edited by

              @olivierlambert Yes, the NIC firmware is the latest.
              Strange that it works with 8.2.1

              Y 1 Reply Last reply Reply Quote 0
              • Y Offline
                yllar @yllar
                last edited by

                Relevant lines in 8.2.1 where it succeeds:

                [ 12.242658] Broadcom NetXtreme-C/E driver bnxt_en v1.10.0-216.0.119.1
                [ 12.274753] bnxt_en 0001:5c:00.0 eth0: Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet found at mem 2affff010000, node addr 40:5b:7f:6e:22:00
                [ 12.274767] bnxt_en 0001:5c:00.0: 252.048 Gb/s available PCIe bandwidth (16 GT/s x16 link)
                [ 12.306588] bnxt_en 0001:5c:00.1 eth1: Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet found at mem 2affff000000, node addr 40:5b:7f:6e:22:01
                [ 12.306599] bnxt_en 0001:5c:00.1: 252.048 Gb/s available PCIe bandwidth (16 GT/s x16 link)
                [ 15.100023] bnxt_en 0001:5c:00.1 side-1659-eth1: renamed from eth1
                [ 15.117296] bnxt_en 0001:5c:00.0 side-3513-eth0: renamed from eth0
                [ 16.878049] bnxt_en 0001:5c:00.0 eth0: renamed from side-3513-eth0
                [ 16.970941] bnxt_en 0001:5c:00.1 eth1: renamed from side-1659-eth1
                [ 20.216480] bnxt_en 0001:5c:00.1 eth1: NIC Link is Up, 100000 Mbps full duplex, Flow control: ON - receive & transmit
                [ 20.216487] bnxt_en 0001:5c:00.1 eth1: FEC autoneg off encodings: None
                [ 20.734402] bnxt_en 0001:5c:00.0 eth0: NIC Link is Up, 100000 Mbps full duplex, Flow control: none
                [ 20.734409] bnxt_en 0001:5c:00.0 eth0: FEC autoneg off encodings: None

                1 Reply Last reply Reply Quote 0
                • olivierlambertO Offline
                  olivierlambert Vates 🪐 Co-Founder CEO
                  last edited by

                  Not entirely strange, a driver version can make the difference.

                  1 Reply Last reply Reply Quote 0
                  • Y Offline
                    yllar
                    last edited by yllar

                    Also works with alt driver (broadcom-bnxt-en-alt-1.10.3_231.0.162.0-1.xcpng8.2.x86_64) in 8.2.1:

                    # yum install broadcom-bnxt-en-alt
# reboot

# modinfo bnxt_en
filename:       /lib/modules/4.19.0+1/override/bnxt_en.ko
version:        1.10.3-231.0.162.0
description:    Broadcom NetXtreme-C/E/S network driver
license:        GPL
srcversion:     533BB7E5866E52F63B9ACCB
alias:          pci:v000014E4d0000D800sv*sd*bc*sc*i*
...
alias:          pci:v000014E4d00001604sv*sd*bc*sc*i*
depends:        devlink,ipv6
retpoline:      Y
name:           bnxt_en
vermagic:       4.19.0+1 SMP mod_unload modversions 

                    # dmesg|grep bnxt_en
[   15.047312] Broadcom NetXtreme-C/E/S driver bnxt_en v1.10.3-231.0.162.0
[   15.048046] bnxt_en 0001:5c:00.0 (unnamed net_device) (uninitialized): Device requests max timeout of 60 seconds, may trigger hung task watchdog
[   15.215453] bnxt_en 0001:5c:00.0 eth0: Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet found at mem 2affff010000, node addr 40:5b:7f:6e:22:00
[   15.215469] bnxt_en 0001:5c:00.0: 252.048 Gb/s available PCIe bandwidth (16 GT/s x16 link)
[   15.216606] bnxt_en 0001:5c:00.1 (unnamed net_device) (uninitialized): Device requests max timeout of 60 seconds, may trigger hung task watchdog
[   15.265361] bnxt_en 0001:5c:00.1 eth1: Broadcom BCM57508 NetXtreme-E 10Gb/25Gb/50Gb/100Gb/200Gb Ethernet found at mem 2affff000000, node addr 40:5b:7f:6e:22:01
[   15.265372] bnxt_en 0001:5c:00.1: 252.048 Gb/s available PCIe bandwidth (16 GT/s x16 link)
[   15.350702] bnxt_en 0001:5c:00.1 side-5183-eth1: renamed from eth1
[   15.385121] bnxt_en 0001:5c:00.0 side-3345-eth0: renamed from eth0
[   17.400142] bnxt_en 0001:5c:00.0 eth0: renamed from side-3345-eth0
[   17.493640] bnxt_en 0001:5c:00.1 eth1: renamed from side-5183-eth1
[   20.614447] bnxt_en 0001:5c:00.1 eth1: NIC Link is Up, 100000 Mbps (NRZ) full duplex, Flow control: none
[   20.614454] bnxt_en 0001:5c:00.1 eth1: FEC autoneg off encoding: None
[   21.113687] bnxt_en 0001:5c:00.0 eth0: NIC Link is Up, 100000 Mbps (NRZ) full duplex, Flow control: ON - receive & transmit
[   21.113694] bnxt_en 0001:5c:00.0 eth0: FEC autoneg off encoding: None
                    Y 1 Reply Last reply Reply Quote 0
                    • Y Offline
                      yannsionneau Vates 🪐 XCP-ng Team @yllar
                      last edited by

                      @yllar @mik @Pilow @marcvds Hello, we think we now understand better this issue.
                      We think it's a Xen issue with regard to PCI devices on segment 0001 (which is your case) and not a dom0 driver issue.

                      Could you give a try to this ISO installer please?
                      Please note that this is a custom test ISO and it is therefore not officially supported, do not use it for production, it is just to confirm that it fixes your issue, we will release a supported ISO in the future (target date for now is June).

                      unsupported test ISO for you to test: https://nextcloud.vates.tech/index.php/s/iHf8sqq39EqE683

                      Regards,
                      Yann

                      Y 1 Reply Last reply Reply Quote 1
                      • Y Offline
                        yllar @yannsionneau
                        last edited by

                        @yannsionneau
                        Thank you.

                        I tested it and I can confirm this solves the issue.
                        Hope you can release the fix quickly.

                        1 Reply Last reply Reply Quote 1
                        • olivierlambertO Offline
                          olivierlambert Vates 🪐 Co-Founder CEO
                          last edited by

                          Thanks for confirming! This is really helpful 🙂

                          1 Reply Last reply Reply Quote 0
                          • Y Offline
                            yllar
                            last edited by

                            Has this been fixed by the update described here?
                            https://xcp-ng.org/blog/2026/05/21/may-2026-updates-3-for-xcp-ng-8-3-lts/?ref=xen-orchestra.com

                            Y 1 Reply Last reply Reply Quote 0
                            • Y Offline
                              yannsionneau Vates 🪐 XCP-ng Team @yllar
                              last edited by

                              @yllar I'm not sure honestly (I will have to ask the rest of the team), but anyway, even if it were fixed by latest xen package, we still didn't publish a new installer ISO with the fix.
                              Target is still around June for the new ISO.
                              Regards,
                              Yann

                              1 Reply Last reply Reply Quote 0

                              Hello! It looks like you're interested in this conversation, but you don't have an account yet.

                              Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.

                              With your input, this post could be even better 💗

                              Register Login
                              • First post
                                Last post