Install XO from sources.

[acebmxer]

Just added the option for --proxy to deploy xo proxy.

https://github.com/acebmxer/install_xen_orchestra/tree/xo-proxy

Deploying a Proxy VM
The script supports deploying a Xen Orchestra Proxy VM directly to your XenServer/XCP-ng pool using the --proxy option:

./install-xen-orchestra.sh --proxy

Important Limitations and Notes

️ Network Configuration:
The --proxy option does not allow you to specify which network the VIF is attached to
It will default to "Pool wide network associated with eth0"

️ Production Use Warning:
Use at your own risk. Not advised for use in production environments.

This feature is provided for testing and development purposes. For production deployments, it is recommended to manually configure proxy VMs with proper network planning and validation.

While can add host and remote via proxy. Backups will fail with the following error.

backupNg.runJob
{
  "id": "95ac8089-69f3-404e-b902-21d0e878eec2",
  "schedule": "76989b41-8bcf-4438-833a-84ae80125367"
}
{
  "code": -32000,
  "data": {
    "stack": "TypeError: licenses.find is not a function
    at Function.<anonymous> (file:///usr/local/lib/node_modules/@xen-orchestra/proxy/app/mixins/appliance.mjs:168:23)
    at processTicksAndRejections (node:internal/process/task_queues:95:5)
    at file:///usr/local/lib/node_modules/@xen-orchestra/proxy/app/mixins/backups.mjs:110:25"
  },
  "message": "licenses.find is not a function"
}

[Pilow]

@acebmxer @ronivay stumbled upon this too
https://github.com/ronivay/XenOrchestraInstallerUpdater#backup-proxy

Backup proxy
Proxy installation method is experimental, use at your own risk. Proxy installation from sources is not documented by Xen Orchestra team. Method used here is the outcome of trial and error.

Proxy source code will be edited slightly to disable license check which only works with official XOA and there is no documented or working procedure to bypass it properly (there used to be but not anymore)

[acebmxer]

@Pilow

Yeah i was looking over his script to see how he worked around it but just states that.

I knew there would be limitations with it so i didnt add it to the main branch yet.

[acebmxer]

@pilow

As I am completly new to this scripting and such I did reach out to Ai for assistance and believe the license check should be bypassed now.

Again not suggested to use in production. Use at your own risk.

still has its own branch for more testing before merging to main branch.

[acebmxer]

https://github.com/acebmxer/install_xen_orchestra

Made some improvements to the script including a inter active menu that will show commit for the script itself compared to the master commit. (should relected which branch you run the script from) With Xen Orchestra Commit comparison and show the Node version installed. The script should self update on launch.

Always review code before using. Use in production at your own risk.

Always open to ideas and suggestions.

  ╔══════════════════════════════════════════════════════════════════════════════════╗
  ║              Install Xen Orchestra from Sources Setup and Update                 ║
  ╚══════════════════════════════════════════════════════════════════════════════════╝

                        Current Script Commit : 693f4
                        Master Script Commit  : 693f4
                        Current XO Commit     : a1b2c
                        Master XO Commit      : d4e5f
                        Current Node          : v24.1.0

  ──────────────────────────────────────────────────────────────────────────────────

  ▸ [✓] Install Xen Orchestra                   [ ] Reconfigure Xen Orchestra
    [ ] Update Xen Orchestra                    [ ] Rebuild Xen Orchestra
    [ ] Rename Sample-xo-config.cfg             [ ] Edit xo-config.cfg
    [ ] Install XO Proxy

  ──────────────────────────────────────────────────────────────────────────────────

  Selected: 1

  ↑↓←→ Navigate   SPACE Select/Deselect   ENTER Confirm   Q Quit

[Greg_E]

@acebmxer

I haven't tried this yet, but liking the menu you just showed!

[AlexanderK]

which is the difference with this?
https://github.com/ronivay/XenOrchestraInstallerUpdater

Using the above around 5-6 years with no issues at all

[acebmxer]

@AlexanderK

I just wanted my own script to install Xen Orchestra from sources with a few additional features not found in Ranivays script. Mine is built completely from scratch but with inspiration form his script.

If you wanted to give my script a try I would appropriate any feedback to any improvements. I would suggest creating a new vm as i have not test my script against an installation done by Ronivays script.

[AlexanderK]

@acebmxer
what have you added? what are the differences?
i will definetely try it.

[acebmxer]

@AlexanderK
The inter-active menu, The menu will show the running script commit against main commit along with showing Xen Orchestra installed commit vs master commit. The script should automatically self-update to latest version.

Just to name a few...

[AlexanderK]

@acebmxer i think that only the menu. the "old" script also auto updates....