Performing automated shutdown during a power failure using a USB-UPS with NUT - XCP-ng 8.2
-
@gskger yeah same on my place. I play around with xcp-ng at home, where this is not important, and there is no UPS. So it is not important here.
But I have built two hosts at work in a server room as well. Together with TrueNAS and a couple of other things. The APC UPS has a management card, so it can be reached via network, but somehow the hosts have to shut down gracefully if needed. That's how I stumpled upon this thread in the first place. -
I'm not saying it's not important in general (it depends on the use cases) But in our priorities (the "regular" DC world), it is not. For the "Edge computing" case, it might be more important, but the word "focus" doesn't have any meaning if we do everything at the same time.
And as usual, contributions are always welcome!
-
Would just having the nut client be sufficient enough on the base XCP-NG to tigger a shutdown via NUT? Maintaining the NUT server seems to be a hold up and add extra complexity for XCP-NG. We all may have different DC power situations, but we could all use tools in our belt at home or the data center.
-
@odeawan Sure but you need a nut server. When you use the XCP-NG Server as a client you have to install the nut server on a different system. You can't install the nut server on a vm on the same host because the nut server must be installed on a system to shut down last.
So running this scenario is the most redundant and efficient way. -
Well I still don't think it is out of scope then for just the NUT client for enterprises or HomeLabs on XCP-NG.
SBCs are everywhere these days. Using a Raspberry Pi as the NUT Server in a homelab or a flavor of a more robust server for NUT seems like a solid choice. No USB passthrough to worry about, uptime on a 1500VA+ UPS, forget about it! There are a handful of guides how to get it running for a Pi or anything else (including this post).
As I think this though, I would still feel ok with another external device watching, waiting, and notifying me on a successful power off of any number of my hosts and VMs. Not all enterprises or homelabs can afford (even if their appetites want it) to get enterprise level power automations. We have our power. Break the chain. @olivierlambert
-
olivierlambert Vates 🪐 Co-Founder CEOlast edited by olivierlambert 3 Sept 2023, 19:04 9 Mar 2023, 18:03
Which chain? The development is open, if you want something, do it If you want to be the maintainer so we can have it updated, packaged and put in our repo (even if not bundled by default), go ahead! If we think there's people behind it, we are not against, since it's an extra package.
- about a month later
-
This post is deleted! - 2 years later
-
After NUT's grand reconfiguration there are a few things that you need to be aware of:
In order to run NUT as a monitor to shut down your XCP-ng hypervisors it is no longer sufficient to just install
nut-client
and enablenut-monitor
.You also need to install
nut
and enablenut.target
ornut-monitor
won't autostart. There won't be anything injournalctl
either, since it isn't even trying to start - the thing that tells it to do so is thenut.target
and if that's missing nothing will ever trigger.yum install nut nut-client --enablerepo=epel
make your edits in
nut.conf
andupsmon.conf
thensystemctl enable nut.target systemctl enable nut-monitor systemctl start nut-monitor
-
@nomad What do you mean by the grand reconfiguration? Is there a new version that changes how things work?