Is my backup configuration sane? (plus a bonus delta backup question)
-
A snapshot is a "frozen" disk state, that's needed to export it. You can't export a disk while it's used by your VM (because blocks are moving!).
For delta, we export (at first) the full content of a snapshot. This will be the big VHD file on your NAS/remote storage.
Next run, we'll take another snapshot, but this time, we'll export only the diff between original and new snapshot. This is the small VHD you have on the remote. When it's done, we remove the oldest snapshot, and so on.
Also, a snapshot doesn't consume a lot of disk space. It's just a small file that will tell we need to freeze the disk content from there.
If you use ext local SR (or NFS) this will have only a small impact on the space used by your VM disks.
It's different on local LVM and LVM over iSCSI (thick pro).
-
@olivierlambert said in Is my backup configuration sane? (plus a bonus delta backup question):
If you use ext local SR (or NFS) this will have only a small impact on the space used by your VM disks.
It's different on local LVM and LVM over iSCSI (thick pro).
My local SRs are still thick provision, I need to change that but that's a different project.
Thanks for the help once again!
-
@olivierlambert Thank you for this explanation of the snapshot. However, does this snapshot decrease the performance of the virtual machine (as with LVM for example) on which it was generated or does it not affect performance at all ?
-
Short answer: depends. Longer answer: if you have more than 3 snapshots, you will start to notice the difference, mostly in read. Because each read will have to check the block origin in the whole chain. But one or two snap will not impact the performance in a very visible way.
All in all, as it's a best practice to avoid more than 3 snapshots for many reasons, don't over think things
-
@olivierlambert Interesting. So you don't recommend nightly incrementals with a weekly full as it would generate too many snapshots and could start seeing performance degradation?
-
Hmm not at all. 2 different jobs will generate 2 snapshots total, which is perfectly fine
-
@CJ on my installation, a full followed by an incremental or the reverse does not result in 2 snapshots but only one. 2 snapshots appear temporarily only when the backup is in progress.
-
You can also have a composite job, doing 2 things at once (like incremental backup and incremental replication), so it will use just one snap for both. But again, 2 and even 3 snaps are OK
-
@olivierlambert Okay, when you say 3 snapshots, you mean number of jobs, not retention? I tend to think of snapshots in ZFS terms so that may be where the disconnect is coming from.
In my example, there would be enough retention of the nightly diff snapshots so that you could restore to any day during the week. Once the weekend full backup occurs the nightly wouldn't be as needed.
I think I might be conflating snapshot and backup. I'll need to double check my cluster, but thinking about it, each nightly snapshot could be overwritten as it would have been backed up to the SR.
-
I'm talking about VM snapshots (and by transitivity, VDI snapshots). Retention is the number of backup you save on the backup repository, and it's totally unrelated to the number of snapshots when doing full or incremental backups.
