vSAN to XCP-ng | XOSTOR homelab
-
SuperMicro SYS-2029BT-HNR (4 node 2U NVMe server)
CPU:
2x Intel Xeon Silver 4214R @ 2.40GHzRAM:
256GB - 16x 16GB Samsung DDR4 ECC RAMDisks:
XCP-ng boot: 1x Intel M.2 150GB SATA
XOSTOR: 6x Intel U.2 1.2TB NVMe - SSDPE2ME012T4Networking:
2x Intel 1GBe
1x Mellanox (dual port) 25GBe - AOC-MH25G-m2S2TM
1x Mellanox (dual port) 100GBeGPU:
1x NVidia Tesla P4HomeLAB networking:
Frontier 5/5 internet
PFSense vm (ESXi is the hypervisor) + Mellanox 100GBe NIC
TOR: Mellanox SN2700
Switches: Meraki MS250P-48, MS350-48
WiFi: 2x Ruckus R750
SuperMicro servers -
Nice hardware
How it's going so far? -
@olivierlambert It's going well. Last night, I just finished installing XOSTOR. It took me a little longer than I thought but it installed without errors!
-

-
Nice
Keep us posted if you have any issue! -
I should just sign up for the XOSTOR 1.0 trial?
-
Yes, if you need a longer trial, just let us know

-
Just scrapped the previous XOSTOR install.
I'm going to "trial" XOA + XOSTOR 1.0
-
F fatek referenced this topic on
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better 💗
Register Login