@mbriet Yes, you can. The user just needs to login once with their LDAP credentials to create the corresponding XO user and then you can manage that user pretty much like a local user, including adding them to groups you created yourself.
@blackliner said in Sdn controller and physical network:
@nikade How do you "pair" the XCP-ng SDN with your routing setup?
You cant/dont, you'll have to setup each private network on the vyos router and then have the vm private network routed through it manually.
For example if you have private network 1 with subnet 192.168.1.0/24 you'd have to add this network to the vyos router and assign 192.168.1.1/24 on the router.
Then set 192.168.1.1 as default gateway in your vm's which uses this network.
Then you'll setup ospf or bgp on the vyos router manually with your upstream border/core-router or firewall. If the subnet is a private subnet you'll need to setup NAT as well somewhere before it reaches internet to NAT traffic from 192.168.1.0/24.
@olivierlambert
Sure
It was just a question
I know WE don't have same infra or feature IS not vmware but thé stack IS really good and interesting
And i Saw Comvault IS compatible with your stack and WE will replace networker with Comvault during next year
