@splastunov
Never ran across this before, that's for that screenshot, and command.
When I'm able to I'll for sure give this another shot and check these.

@splastunov
Yes, that works, RDP works etc.
I'm trying to get Video out on the physical display/hdmi ports.

@Huursa
A dummy plug is what you would use in the event of using no monitor.
I can get perfect GPU passthrough in a VM. I can't get video output to an actual monitor. Is what I'm saying.

In the past I was able to successfully pass through a GTX 970 on a Dell R720.

I had limited time for testing but in the end it was successful I was able to get the GPU to pass through to the VM. Everything worked as expected for RDP however.

I was never able to manage to get a video output from any of the GPU video ports HDMI display port etc..

Is anyone aware of a way to get this to work I do want to do GPU pass through but I want the VM to act as a physical device.

Is this a limitation of the hypervisor?
GPU pass through works fine but no video output from graphics card?

I could not find any instance in the forums of anyone trying to do this but I know it can be done with KVM and Windows GPU-P, Unraid etc.

Has anyone done this successfully or know if it's possible?

@olivierlambert Thanks. As always you guys are great.
Thanks for this opensource project!
Tasks have cleared up.

@olivierlambert
I've been using NGINX-PROXY-MANAGER locally.
Just changed XOA to same network as host.
I still need to wait 24 hours? Or can I restart toolstack?

@olivierlambert
Should I be concerned about them?
The only fix is to put my host and XOA on the same network?

@olivierlambert I can access it locally or NAT'd.
I've had it running for over a year without change.

But yes. I can access it via http:xoa.domain.com and via http://192.168.15.15

I've been running it in docker, but when troubleshooting I've tried running it natively on Linux built from source with the same issue.

I woke up yesterday to 14,000+ tasks that stated the following.
Xapi#getResource /rrd_updates (on xcp-ng-01) 0% xen orchastra was also not reporting any stats on VMs.

Xen-Center however was reporting everything correctly and fine.

I was unable to find anything recently via the forums or github issues since 2018.
I did not find anything meaningful in the logs other than some coalescence issues happening.

In troubleshooting, i've tried many things. My last resort was to re-install XCP-NG 8.2, and also reinstall XOA from source.

I still seem to be getting the same tasks. However it seems to be hovering around 35ish.

Any ideas what this is indicating?
https://imgur.com/fgufNRw

@olivierlambert
Well you guys may want to edit this

https://xcp-ng.org/docs/compute.html#vgpu

NVIDIA vGPU
WARNING

Due to a proprietary piece of code in XenServer, XCP-ng doesn't have (yet) support for NVIDIA vGPUs

I'll repost the same question to the forum.

https://www.reddit.com/r/xcpng/comments/mmq46n/nvidia_allowing_passthrough_now_support_on_xcpng/

Basically i just wanted to know if the XCP-NG team had any plans to implement the drivers required to make this work with consumer GPUs now?

Thanks