So everyone is cleared since I just experience the same issue not allowing me to create a new vm using the template.
Before you use the Windows 11 Template and you have it with SYSPREP ready. You need to go down to advanced and make sure you delete the VTPM
then create the Template.
Once you create the vm again you will not receive the error and a vtpm will be created for the new VM with no issue.
Hope this helps.
Re: Cloning Windows 11 with vTPM
So everyone is cleared since I just experience the same issue not allowing me to create a new vm using the template.
Before you use the Windows 11 Template and you have it with SYSPREP ready. You need to go down to advanced and make sure you delete the VTPM
then create the Template.
Once you create the vm again you will not receive the error and a vtpm will be created for the new VM with no issue.
Hope this helps.
@rauly94 Hello everyone.
Anyone can help me on this issue. Now it started happening on 2 vm's instead of 1 vm. It is happening on the backup replication.
Error: VDI_IO_ERROR(Device I/O errors)This is a XenServer/XCP-ng error
Start: Jul 5, 2023, 09:03:18 AM
End: Jul 5, 2023, 09:44:46 AM
Duration: 41 minutes
Error: VDI_IO_ERROR(Device I/O errors)This is a XenServer/XCP-ng error
Start: Jul 5, 2023, 09:03:09 AM
End: Jul 5, 2023, 09:45:12 AM
Duration: 42 minutes
Error: VDI_IO_ERROR(Device I/O errors)This is a XenServer/XCP-ng error
Type: delta
So everyone is cleared since I just experience the same issue not allowing me to create a new vm using the template.
Before you use the Windows 11 Template and you have it with SYSPREP ready. You need to go down to advanced and make sure you delete the VTPM
then create the Template.
Once you create the vm again you will not receive the error and a vtpm will be created for the new VM with no issue.
Hope this helps.
Re: Cloning Windows 11 with vTPM
So everyone is cleared since I just experience the same issue not allowing me to create a new vm using the template.
Before you use the Windows 11 Template and you have it with SYSPREP ready. You need to go down to advanced and make sure you delete the VTPM
then create the Template.
Once you create the vm again you will not receive the error and a vtpm will be created for the new VM with no issue.
Hope this helps.
@olivierlambert
for the quick response. I'm reading now thru it to see how I can do it. thanks
@olivierlambert
I want to be able to manage multiple xenorchestra locations. Because right now I need to VPN to every different location to see how vm's, backups etc... is running. Can I see all from 1 dashboard.
Thank you,
Raul.
@rauly94 Hello everyone.
Anyone can help me on this issue. Now it started happening on 2 vm's instead of 1 vm. It is happening on the backup replication.
Error: VDI_IO_ERROR(Device I/O errors)This is a XenServer/XCP-ng error
Start: Jul 5, 2023, 09:03:18 AM
End: Jul 5, 2023, 09:44:46 AM
Duration: 41 minutes
Error: VDI_IO_ERROR(Device I/O errors)This is a XenServer/XCP-ng error
Start: Jul 5, 2023, 09:03:09 AM
End: Jul 5, 2023, 09:45:12 AM
Duration: 42 minutes
Error: VDI_IO_ERROR(Device I/O errors)This is a XenServer/XCP-ng error
Type: delta
@olivierlambert said in VDI_IO_ERROR(Device I/O errors) when you run scheduled backup:
dmesg
that's what i got. I'm I doing it correctly.
The issue is happening on 1 VM. i tried doing a copy of the same vm and same error. just FYI
@olivierlambert sorry to ask, but where should I do this at?
Good Morning guys,
it looks like I'm having the same issue on a host that I'm doing replications. On the normal Delta Backups I'm not getting this error. But I'm getting it on the schedule Replication for only 1 of the vm's. Here is what comes on the log for that VM.
"id": "1679486747187",
"message": "transfer",
"start": 1679486747187,
"status": "failure",
"end": 1679487904889,
"result": {
"code": "VDI_IO_ERROR",
"params": [
"Device I/O errors"
],
"url": "https://192.168.2.11/import_raw_vdi/?format=vhd&vdi=OpaqueRef%3Aa5f60c35-64c2-497e-ae15-77aa63d14274&session_id=OpaqueRef%3A1593dbd0-4347-4dee-ad02-58ed84f6dbf6&task_id=OpaqueRef%3Aced050e9-1f49-4bbe-8b74-ef787d536d62",
"task": {
"uuid": "a7e3ba73-9d02-c211-48be-6a246828211c",
"name_label": "[XO] Importing content into VDI HEALmycroft 0",
"name_description": "",
"allowed_operations": [],
"current_operations": {},
"created": "20230322T12:05:52Z",
"finished": "20230322T12:25:03Z",
"status": "failure",
"resident_on": "OpaqueRef:259273e3-6fe1-4f9a-b688-ab0847cb81f8",
"progress": 1,
"type": "<none/>",
"result": "",
"error_info": [
"VDI_IO_ERROR",
"Device I/O errors"
],
"other_config": {},
"subtask_of": "OpaqueRef:NULL",
"subtasks": [],
"backtrace": "(((process xapi)(filename ocaml/xapi/vhd_tool_wrapper.ml)(line 77))((process xapi)(filename lib/xapi-stdext-pervasives/pervasiveext.ml)(line 24))((process xapi)(filename lib/xapi-stdext-pervasives/pervasiveext.ml)(line 35))((process xapi)(filename lib/xapi-stdext-pervasives/pervasiveext.ml)(line 24))((process xapi)(filename lib/xapi-stdext-pervasives/pervasiveext.ml)(line 35))((process xapi)(filename ocaml/xapi/import_raw_vdi.ml)(line 170)))"