By the way, is there a built-in driver for the Dell S140 in Xcp-ng?
Too bad write speed on a Dell poweredge R440 with Samsung 860 evo ssd all the way down to 150MB/s write speed. The same ssd in a regular PC with Xcp-ng gave 560MB/s
By the way, is there a built-in driver for the Dell S140 in Xcp-ng?
Too bad write speed on a Dell poweredge R440 with Samsung 860 evo ssd all the way down to 150MB/s write speed. The same ssd in a regular PC with Xcp-ng gave 560MB/s
@steff22 is one of these in the Asus pn52 RTL8125B-CG or Realtek RTL8125BG-CG, by the way. is it standard RTL8125 even if it is B-CG or BG-CG
@Andrew now see that I also get 118MBytes/sec (connected to 1G switch.
But I don't have a dedicated 2.5 switch. So it is connected to a 10G switch with rj45 sfp+ module which steps down to 2.5g. This solution worked perfectly in windows 10 with full 2.5G both directions on the same Asus pn52 with CrystalDiskMark over smb I got Sequential reed 0.42 MB/s and Write 292.80 MB/s with Xcp-ng win 10 vm
@stormi yes, it seems that way. oh is that such a shame since the Asus pn52 has an AMD Ryzen 9 5900HX 8 cores/16 threads 3.3ghz cpu and up 64 gb ram
@steff22 was probably alpha that I had to install.
Reinstalled beta 1 now and no patches came up.
but is still the same network problem approx. 4 MiB in speed on backup restore
@stormi do not know. But there are 88 patches in Xen orchestra.
did a fresh install from the iso. but suspect that I have chosen the wrong iso in ventoy now. says installer xcp-ng 8.3.0 is this alpha?
hi yes worked on alpha. Worked on Beta 1 now after I unplugged the power and plugged it back in.
but are the same problem as with alpha, something is wrong with the drivers which make it so that I have 2.5 GB up and 40 mbps down or no speed. with Vm backup restore for me about 4MiB speed with a Samsung 970 PRO with 2 ssd inside Asus PN52.
But after it got internet i see there are 88 patches. can install them and see if there is any change
Xcp-ng 8.3 beta did not work on Asus pn 52 with RTK8125B nic. Xcp-ng 8.3 does not find any network cards
@steff22 Are the guest tools that have support for Xcp-ng 8.3 ?
@stormi ok, installing the patch didn't help the network speed.
Are probably the drivers for the RTK8125B with which there are some bugs. I get full speed when I install Windows 10 on the Asus PN52.