XCP-ng 8.0.0 Beta now available!
-
Dom0can't boot here. Likely related to a more recent kernel than in 7.6.Note that I don't have any issue on a Ryzen 7 (2xxx) nor EPYC.
Anyone else with a 2200G?
-
Additionally: I installed XS 7.6 before and 'upgraded' it via USB-stick to XCP-ng 7.6.
Worked without any problems and VMs were fine.Also regarding boot: I had a problem like that with OPSI, as their bootimage had some changes to the kernel, that made it stop.
What helped was to limit the memory to 2G (2048M). I don't know if/how to add that to the USB-stick, to test if that helps here, too.
(Tried noapic/noacpi on OPSI before... maxmem helped!) -
In UEFI, you can edit the Grub menu before starting install. Try to change RAM value there
-
I've taken a loot at the USB-stick and found grub config files. What I found was a maxmem of 8192 MB already configured.
I changed it to 2048M (I don't see any reason why the setup should need more than a few hundret MBs) aaaand it worked.
As it affected 2 different systems (opsi bootimage for PXE install and CH/XCP) I'm very sure it's a kernel bug!
Though I can't say which kernels are affected, except that old kernels work.
When I have time, I may test it on our Epyc server, but I guess that it
s more about the embedded Vega GPU and the shared memory.https://forum.opsi.org/viewtopic.php?f=8&t=10611 Et al.
I'm not the first one, having trouble with Ryzen/Vega APU and the Linux kernel.tl;dr:
As a workaround, I recommend setting the mem-limit for install stick generally to 2048M, as there shouldn't be any benefit for more anyways and it pushes compatibility.Yet have to upgrade the system and see if XCP-ng 8 Beta boots properly (had it still on CH 8.0 for test).
-
Indeed, I suppose it's related to Ryzen+Vega APU, because I can't reproduce on EPYC nor Ryzen without APUs.
Regarding making the chance upstream, I'm not entirely confident to make the modification, because it's hard to evaluate the impact (our RC is pretty close now). But it's up to @stormi to decide
-
At this stage, I'd rather document the issue to help people workaround it than change the default values inherited from Citrix (who tested the installer on a lot of hardware). I also suggest to open an issue at https://github.com/xcp-ng/xcp/issues so that other users that would meet the same issue could share their experience and let us try to estimate whether it's a widely spread issue or something very specific to some hardware.
-
Looks like the best way to me
-
@cg said in XCP-ng 8.0.0 Beta now available!:
I created an issue, IMHO it would be good if the problem itself makes it to upstream to either bump someone to fix it or get feedback that problem is known/fixed in version X.Y.Z.
For reference:
https://github.com/xcp-ng/xcp/issues/206closed Unable to boot installer with AMD Ryzen APUs #206
-
@cg said in XCP-ng 8.0.0 Beta now available!:
I created an issue, IMHO it would be good if the problem itself makes it to upstream to either bump someone to fix it or get feedback that problem is known/fixed in version X.Y.Z.
Thanks for creating the issue.
You could test with Citrix Hypervisor and then report it at https://bugs.xenserver.org
Maybe they'll want to investigate even if the hardware is not officially supported. If someone can reproduce the issue on supported hardware, that would make things easier. -
@stormi said in XCP-ng 8.0.0 Beta now available!:
You could test with Citrix Hypervisor and then report it at https://bugs.xenserver.org
Maybe they'll want to investigate even if the hardware is not officially supported. If someone can reproduce the issue on supported hardware, that would make things easier.Though I doubt it was woth the effort, as the support over there is well known (especially for not supported configurations etc.) I did it - for the reason of trying to improve stuff (and giving back to OSS community):
https://bugs.xenserver.org/projects/XSO/issues/XSO-955 -
I just did the upgrade from 7.6 to 8.0.0 beta via USB-stick (with workaround): I successfully upgraded the existing installation including the softwareraid on the first 2 SSDs.
# cat /proc/mdstat Personalities : [raid1] md127 : active raid1 sda[0] sdb[1] 117220736 blocks super 1.0 [2/2] [UU] bitmap: 1/1 pages [4KB], 65536KB chunkEverythings fine, even RAID survived. ZFS stuff will come later. Would be good if that would find a way into XCP-ng Center (is it in XOA yet?) for easier management. Likewise for Ext4.
-
Find a way to what?
-
New SR -> Type -> ZFS... creatig a new SR via GUI/XCP-ng Center.
-
You should really keep an eye on XO dev
https://github.com/vatesfr/xen-orchestra/pull/4266
It's coming this week
closed feat(xo-web/new-sr): list ZFS pools at SR creation #4266
-
My time is (sadly) limited, I can't wacht/monitor everything.
XCP-ng Center? -
XCP-ng Center is only community maintained, so feel free to contribute if you want that inside
-
XCP-ng already ate a bunch of time, and I'm sure it'll continue for testing etc
I'm Sysadmin with very limited coding ability - I'm definately out for that.I guess it would need someone being good at C#.NET. Also XAPI would probably need to know about it (what may already be, as you're implementing it into XOA)...
-
Clearly, adding feature in XCP-ng Center would require a lot of contributions, that's why I don't think it's the future of XCP-ng "client". Having one great client allows to focus all effort instead of "spreading" the thin capabilities on various similar "ways" to administrate it.
-
Yes, this seems to be the case
But XCP-ng Center will remain as it is, at least. -
I think it's a good thing to focus on one "best" tier-one solution, especially on a "small" community like us
