I'm sure this is not the first time this question has been asked but i cant find in searches.

after a re introduce and the disk is available without metadata how to tell what the latest one is. i have a 14tb drive and had 100's is snaps and copy's ect. i have been just mounting them and looking at logs and naming them but there has to be a better way.

Thanks for any help . always learning (sometimes the hard way)

@olivierlambert 2x x5680 xeons 3.3ghz 24 cores should be able to generate xvas I would think so ?

@olivierlambert that's what I did and performance is fine. Soon as I choose dr (disaster recovery) it takes 2 5 times longer.

@olivierlambert it first run so it's a full copy and 300 gigs took 1.5 hrs. With dr first run take 3-4. I do backups inside to iscsi very fast also. Just DR seems to take twice as long and I'm fully updated. It is from sources but fully updated. I even downloaded the official and tried trial and dr is still slow.

@olivierlambert so interesting enough , i changed to CR and not DR and backup is fast.

300gig from ssd to 2TB sata drive takes 6 hrs. i can backup inside vm to a iscsi in 1 hr.

i have two vm servers both with the same issues. cant seem to see why there is such a bottle neck on the backup?

when i choose delta backup transfer rate is 10Mbps cant seem to see why so slow.

i attched a SR drive as a second HDD and used a cloning software and it cloned over 100MBs so i know its not drives.