@yannsionneau Hi, Sorry for the delay... menuentry 'XCP-ng' { search --label --set root root-zrxcsq multiboot2 /boot/xen.gz dom0_mem=8192M,max:8192M watchdog ucode=scan dom0_max_vcpus=1-16 crashkernel=256M,below=4G console=vga vga=mode-0x0311 module2 /boot/vmlinuz-4.19-xen root=LABEL=root-zrxcsq ro nolvm hpet=disable console=hvc0 console=tty0 quiet vga=785 splash plymouth.ignore-serial-consoles xen-pciback.hide=(0000:03:00.0) module2 /boot/initrd-4.19-xen.img } 03:00.0 VGA compatible controller: NVIDIA Corporation GB202GL [RTX PRO 6000 Blackwell Max-Q Workstation Edition] (rev a1) (prog-if 00 [VGA controller]) Subsystem: NVIDIA Corporation Device 204c Physical Slot: 10 Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Interrupt: pin A routed to IRQ 89 Region 0: Memory at f4000000 (32-bit, non-prefetchable) [disabled] [size=64M] Region 1: Memory at 70060000000 (64-bit, prefetchable) [disabled] [size=256M] Region 3: Memory at 70070000000 (64-bit, prefetchable) [disabled] [size=32M] Region 5: I/O ports at 1000 [disabled] [size=128] Expansion ROM at f8000000 [disabled] [size=512K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0+,D1-,D2-,D3hot+,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable- Count=1/16 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [60] Express (v2) Legacy Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x16, ASPM L1, Exit Latency L0s unlimited, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR+, OBFF Via message DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR+, OBFF Via WAKE# LnkCtl2: Target Link Speed: Unknown, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete+, EqualizationPhase1+ EqualizationPhase2+, EqualizationPhase3+, LinkEqualizationRequest- Capabilities: [9c] Vendor Specific Information: Len=14 <?> Capabilities: [100 v1] #19 Capabilities: [12c v1] Latency Tolerance Reporting Max snoop latency: 1048576ns Max no snoop latency: 1048576ns Capabilities: [134 v1] #15 Capabilities: [14c v1] #25 Capabilities: [158 v1] #26 Capabilities: [188 v1] #2a Capabilities: [1b8 v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq- ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO+ CmpltAbrt- UnxCmplt+ RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [200 v1] #27 Capabilities: [248 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 1 ARICtl: MFVC- ACS-, Function Group: 0 Capabilities: [2a4 v1] Vendor Specific Information: ID=0001 Rev=1 Len=014 <?> Capabilities: [2bc v1] Power Budgeting <?> Capabilities: [2f4 v1] Device Serial Number 18-a6-fe-7f-8f-2d-b0-48 Kernel driver in use: pciback 03:00.1 Audio device: NVIDIA Corporation Device 22e8 (rev a1) Subsystem: NVIDIA Corporation Device 0000 Physical Slot: 10 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0, Cache Line Size: 64 bytes Interrupt: pin B routed to IRQ 10 Region 0: Memory at f8080000 (32-bit, non-prefetchable) [size=16K] Capabilities: [40] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [48] MSI: Enable- Count=1/1 Maskable+ 64bit+ Address: 0000000000000000 Data: 0000 Masking: 00000000 Pending: 00000000 Capabilities: [60] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <64ns, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset- SlotPowerLimit 75.000W DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ MaxPayload 256 bytes, MaxReadReq 512 bytes DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq+ AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x16, ASPM L1, Exit Latency L0s unlimited, L1 unlimited ClockPM+ Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x4, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range AB, TimeoutDis+, LTR+, OBFF Via message DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkSta2: Current De-emphasis Level: -6dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [9c] Vendor Specific Information: Len=14 <?> Capabilities: [100 v1] #25 Capabilities: [10c v2] Advanced Error Reporting UESta: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UEMsk: DLP- SDES- TLP- FCP- CmpltTO- CmpltAbrt- UnxCmplt- RxOF- MalfTLP- ECRC- UnsupReq+ ACSViol- UESvrt: DLP+ SDES+ TLP- FCP+ CmpltTO+ CmpltAbrt- UnxCmplt+ RxOF+ MalfTLP+ ECRC+ UnsupReq- ACSViol- CESta: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr+ CEMsk: RxErr- BadTLP- BadDLLP- Rollover- Timeout- NonFatalErr- AERCap: First Error Pointer: 00, GenCap+ CGenEn- ChkCap+ ChkEn- Capabilities: [154 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 0 ARICtl: MFVC- ACS-, Function Group: 0 09:00.0 Non-Essential Instrumentation [1300]: Advanced Micro Devices, Inc. [AMD] Genoa/Bergamo Dummy Function (rev 01) Subsystem: Advanced Micro Devices, Inc. [AMD] Genoa/Bergamo Dummy Function Control: I/O- Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Capabilities: [48] Vendor Specific Information: Len=08 <?> Capabilities: [50] Power Management version 3 Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA PME(D0-,D1-,D2-,D3hot-,D3cold-) Status: D0 NoSoftRst+ PME-Enable- DSel=0 DScale=0 PME- Capabilities: [64] Express (v2) Endpoint, MSI 00 DevCap: MaxPayload 256 bytes, PhantFunc 0, Latency L0s <4us, L1 unlimited ExtTag+ AttnBtn- AttnInd- PwrInd- RBE+ FLReset+ SlotPowerLimit 0.000W DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+ Unsupported- RlxdOrd+ ExtTag+ PhantFunc- AuxPwr- NoSnoop+ FLReset- MaxPayload 128 bytes, MaxReadReq 512 bytes DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr- TransPend- LnkCap: Port #0, Speed unknown, Width x16, ASPM L0s L1, Exit Latency L0s <64ns, L1 <1us ClockPM- Surprise- LLActRep- BwNot- ASPMOptComp+ LnkCtl: ASPM Disabled; RCB 64 bytes Disabled- CommClk+ ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt- LnkSta: Speed unknown, Width x16, TrErr- Train- SlotClk+ DLActive- BWMgmt- ABWMgmt- DevCap2: Completion Timeout: Range ABCD, TimeoutDis+, LTR-, OBFF Not Supported DevCtl2: Completion Timeout: 50us to 50ms, TimeoutDis-, LTR-, OBFF Disabled LnkCtl2: Target Link Speed: Unknown, EnterCompliance- SpeedDis- Transmit Margin: Normal Operating Range, EnterModifiedCompliance- ComplianceSOS- Compliance De-emphasis: -6dB LnkSta2: Current De-emphasis Level: -3.5dB, EqualizationComplete-, EqualizationPhase1- EqualizationPhase2-, EqualizationPhase3-, LinkEqualizationRequest- Capabilities: [100 v1] Vendor Specific Information: ID=0001 Rev=1 Len=010 <?> Capabilities: [270 v1] #19 Capabilities: [328 v1] Alternative Routing-ID Interpretation (ARI) ARICap: MFVC- ACS-, Next Function: 1 ARICtl: MFVC- ACS-, Function Group: 0 Capabilities: [410 v1] #26 Capabilities: [450 v1] #27 Capabilities: [500 v1] #2a xe pci-list uuid ( RO) : 73708288-55ec-b17f-ba73-6d2c116b3bbc vendor-name ( RO): NVIDIA Corporation device-name ( RO): GB202GL [RTX PRO 6000 Blackwell Max-Q Workstation Edition] pci-id ( RO): 0000:03:00.0 uuid ( RO) : c94f0327-8c86-3aa8-dd7c-9389ae1123f5 vendor-name ( RO): Intel Corporation device-name ( RO): Ethernet Controller X550 pci-id ( RO): 0000:81:00.1 uuid ( RO) : 09e0f3b1-18bb-8a6e-97d8-0209a8e4a97c vendor-name ( RO): Advanced Micro Devices, Inc. [AMD] device-name ( RO): FCH SATA Controller [AHCI mode] pci-id ( RO): 0000:0a:00.1 uuid ( RO) : cc5feb5c-b8aa-a975-de76-513d309f8e73 vendor-name ( RO): Intel Corporation device-name ( RO): Ethernet Controller X550 pci-id ( RO): 0000:41:00.0 uuid ( RO) : 72baa4c2-13b3-22fb-cc87-b10033ccb025 vendor-name ( RO): Broadcom / LSI device-name ( RO): MegaRAID 12GSAS/PCIe Secure SAS39xx pci-id ( RO): 0000:c1:00.0 uuid ( RO) : d2d40d25-4b69-7f6a-a8e2-3101ad80fcb6 vendor-name ( RO): Intel Corporation device-name ( RO): Ethernet Controller X550 pci-id ( RO): 0000:41:00.1 uuid ( RO) : 630bdaee-0e03-b8a1-c726-4f34230e89f7 vendor-name ( RO): Intel Corporation device-name ( RO): Ethernet Controller X550 pci-id ( RO): 0000:81:00.0 uuid ( RO) : d4023077-83fe-a0b7-5f3f-516204c2c1d1 vendor-name ( RO): Advanced Micro Devices, Inc. [AMD] device-name ( RO): FCH SATA Controller [AHCI mode] pci-id ( RO): 0000:ce:00.1 uuid ( RO) : c67855cd-4908-0711-7424-a6db2eb011f0 vendor-name ( RO): Advanced Micro Devices, Inc. [AMD] device-name ( RO): FCH SATA Controller [AHCI mode] pci-id ( RO): 0000:0a:00.0 uuid ( RO) : ef1d93e4-e82b-c33c-a488-8f7a9129eb8a vendor-name ( RO): NVIDIA Corporation device-name ( RO): Device 22e8 pci-id ( RO): 0000:03:00.1 uuid ( RO) : b6235c56-4070-dc4d-9db2-5e361f38d2b2 vendor-name ( RO): Advanced Micro Devices, Inc. [AMD] device-name ( RO): FCH SATA Controller [AHCI mode] pci-id ( RO): 0000:ce:00.0 uuid ( RO) : 5c7258ae-504b-9ac4-8b16-7129b8d8455d vendor-name ( RO): ASPEED Technology, Inc. device-name ( RO): ASPEED Graphics Family pci-id ( RO): 0000:cc:00.0 xl pci-assignable-list 0000:03:00.0 Model: Supermicro AS-2015CS-TNR

Edit: For anyone with this issue, stopping and starting the Openmetrics plugin after saving the password in XO fixed it. I keep getting the {"error":"Query authentication does not match server setting"} problem, is there something I'm missing? I run XO proxied through Nginx with HTTPS, is there some additional config required to get it working? I have set the key with openssl rand -hex 32 and have verified that is saved correctly in the plugin, and that I am using the same key for curl. I am able to obtain the /health endpoint as expected, I just cannot obtain the full metrics, only returns that error. Command: curl --insecure -H "Authorization: Bearer mytoken" https://xo.mydomain.local/openmetrics/metrics XO commit: 91c5d I should note that running the command inside my Docker container returns only the error, including the health endpoint. Do I need to expose 9004?

I know this is old but I had a similar issue. In the end I told dracut NOT to reassemble my raid array which allowed the system to boot perfectly after. I have no idea why it tries to assemble the same array two but on the second seems to be important

My current findings regarding this: https://github.com/xcp-ng-rpms/microsemi-aacraid/issues/2 0nelight created this issue in xcp-ng-rpms/microsemi-aacraid open Microsemi Adaptec Series-8 Card not working in XCP-NG 8.3 #2

Hi @champagnecharly , On the XO side, it seems that this PCI has an empty string ID, which doesn't enable us to delete it. We'll have to do some tests to find out how to prevent that. We might have trouble reproducing the issue, so would you mind helping us with the tests? You would need to add this piece of code on file xo-server/dist/xapi-object-to-xo.mjs before the line that start with if (isHvm) { (that should be near line 475) if ((_vm$attachedPcis = vm.attachedPcis) !== null && _vm$attachedPcis !== void 0 && _vm$attachedPcis.includes('')) { warn('Empty string PCI id:', otherConfig.pci); } then restart xo-server and look at the output of journalctl, there should be some lines looking like: 2026-01-30T09:26:17.763Z xo:server:xapi-objects-to-xo WARN Empty string PCI id: