XCP-ng 8.3 betas and RCs feedback 🚀
-
We already retain a lot of packages until they pass our internal tests successfully, but at some point we need to get feedback from users, and that's what happened here, revealing at the same time that we need to add pfSense to the OSes we test internally. Better find issues now than after the final release, and retaining packages would limit the amount of testing they receive. There's a known workaround for people who are really stuck, so I didn't pull the package back.
-
There is a new build of
edk2available for testing. We don't know yet if it fixes all the issues users met, so we need your feedback.Install with:
yum update edk2 --enablerepo=xcp-ng-testing,xcp-ng-ciIf you need to rollback:
yum downgrade edk2-20180522git4b8552d-1.5.1.xcpng8.3I'm especially interested in @archw's feedback, since their issue was not just with pfSense but with any UEFI VM instead. But I'm also interested in feedback from UEFI pfSense users.
-
@stormi New update version
edk2-20220801-1.7.3.xcpng8.3.x86_64fixed my FreeBSD UEFI boot problem (stuck on boot countdown). XCP reboot NOT required after install. Windows 10 and Ubuntu boot correctly also (but did before too). I did not test secure boot or bitlocker. -
Great news
-
Hey gents,
Has anyone else noticed that if you have a Win 11 guest (pro or enterprise) with the vtpm, that's Entra (Azure) joined, that when migrating to a diff host it breaks the Azure AD membership?
I'll try to dig up some more specifics and run a more thorough test, but I've run into it twice now on a VM I've been running on my test lab with 8.3 beta. Relatively simple solution, leave Azure domain, rejoin, but I suspect that that the token gets saved in vtpm and is either lost or invalidated by migrating hosts.
-
That's a good question
Are you migrating in the same pool or to a different pool? -
Same pool, I have 3 minisforum pc's I've been messing around with to learn XCP-NG, they aren't in a cluster because I got lazy after installation, but are connected via truenas iscsi as central iscsi storage.
Loving the system overall, I could never go back to hyper-v...
I was patching manually by moving machines and then using the gui single host patch button. I had an issue with rolling patches, and didn't really want to bug you guys over it, it's likely user error. Setup is installed from sources.
-
@matt-plan8 I don't understand. Pool and cluster are the same thing. Pool for XCP-ng is what VMWare calls cluster.
-
@stormi sorry I consider HA a cluster, pool I consider just a group of machines in the same management domain.
They are in a single pool, they aren't HA
-
@stormi said in XCP-ng 8.3 beta
:yum downgrade edk2-20180522git4b8552d-1.5.1.xcpng8.3
It didn't work. It just sits there with the attached screen.
-
@archw You're quoting the downgrade command. May I assume you tried
yum update edk2 --enablerepo=xcp-ng-testing,xcp-ng-ciinstead and got versionedk2-20220801-1.7.3.xcpng8.3.x86_64? -
@stormi
Sorry...I cliked reply to teh wrong post.Yes, I ran "yum update edk2 --enablerepo=xcp-ng-testing,xcp-ng-cii" and let it install. I then rebooted the VM (several of them) and tried to start them and none worked. I then ran "yum downgrade edk2-20180522git4b8552d-1.5.1.xcpng8.3" and the VM's fired right up.
-
I just published new updates for XCP-ng 8.3:
edk2-20220801-1.7.3.xcpng8.3, which some of you already tested. It fixes UEFI pfSense booting.e2fsprogs-1.47.0-1.1.xcpng8.3(and subpackages): brought to the same level as latest XCP-ng 8.2.1. If you installed using the latest test installation ISO, you already have it.r8125-module-9.012.04-1.xcpng8.3which updates ther8125driver.
-
@stormi While I can not test the changes, the update went well. However, the restart took a few minutes longer than expected (or I was impatient again).
-
@stormi Nice thanks so I can run the complete update on XOA and not worry about having to remove that single edk2 anymore that wasn't working.
Will do that later -
So, @ThierryEscande found the issue which made all UEFI VMs crash on @archw's server and patched it.
This was the last issue before we could publish XCP-ng 8.3 Beta 2, so this is good news.
Now, we need you all to test the patched RPM and check your UEFI VMs still work well with it: start, function normally...
To install it:
yum update edk2-20220801-1.7.3.1.xcpng8.3 --enablerepo=xcp-ng-ciNo need to reboot, but UEFI VMs need to be restarted afterwards (when doable. If you have a specfic VM that you can't reboot yet, it's OK to leave it alone).
In case things do not work as expected, you can come back to the previous build with :
yum downgrade edk2 -
@stormi The new version still works for me (linux/freebsd).
-
@stormi Tested the new edk package at looks good to me. was able to reboot linux and freebsd VMs without a hitch with UEFI boot mode.
-
Thanks to both of you. I moved the fixed
edk2package to repoxcp-ng-base, so all testers will get it next time they update. -
@stormi
Fantastic and way to go...thanks for all your hard work!
