Unable to enable High Availability - INTERNAL_ERROR(Not_found)

olivierlambert

Hi,

This is weird indeed. Do you have a shared SR available/connected? Can you try to enable HA with xe CLI directly from the host?

jmannik

@olivierlambert

[18:15 vmhost13 ~]# xe pool-ha-enable heartbeat-sr-uuids=381caeb2-5ad9-8924-365d-4b130c67c064
The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem.
message: Not_found

olivierlambert

That's weird. Ping @Team-XAPI-Network and maybe directly @psafont

andriy.sultanov

@jmannik Please upload your /var/log/xensource.log from the time of the error, otherwise it's hard to see what went wrong

psafont

@jmannik said in Unable to enable High Availability - INTERNAL_ERROR(Not_found):

@olivierlambert

[18:15 vmhost13 ~]# xe pool-ha-enable heartbeat-sr-uuids=381caeb2-5ad9-8924-365d-4b130c67c064
The server failed to handle your request, due to an internal error. The given message may give details useful for debugging the problem.
message: Not_found

That message is created by an exception. It's commonly raised by List.find and List.assoc, in this case the exception wasn't caught.

It's usually difficult to find out which one, since these functions are frequently used and catching the exception can happen in a caller of the function that uses it.

Could you provide the xenserver.log, as Andriy has asked? Otherwise I don't think we'll be able to find the exact cause.

jmannik

@andriy.sultanov @psafont
https://drive.google.com/file/d/1aJyCYSAuRIBb0X-23gJ6ORtrHSciYH8a/view?usp=sharing
Here is the log file

psafont

@jmannik said in Unable to enable High Availability - INTERNAL_ERROR(Not_found):

@andriy.sultanov @psafont
https://drive.google.com/file/d/1aJyCYSAuRIBb0X-23gJ6ORtrHSciYH8a/view?usp=sharing
Here is the log file

It's not crystal clear the condition that causes the exception, but I can see some unprotected exception being raised in that path host.ha_join_liveset when trying to recover the host uuid and it's not found. I'll investigate

psafont

@jmannik I have a test build that you can test, it will hopefully provide better error messages by raising an internal error with a reason.

The code is based on the newest builds, so I recommend updating to the latest version of XCP beforehand:

yum update
reboot

Once that is done, the test packages can be installed by creating the file /etc/yum.repos.d/xcp-test.repo:

[xcp-ng-psafont1]
name=xcp-ng-psafont1
baseurl=https://koji.xcp-ng.org/repos/user/8/8.3/psafont1/x86_64/
enabled=0
gpgcheck=1
repo_gpgcheck=1
metadata_expire=0
gpgkey=file:///etc/pki/rpm-gpg/RPM-GPG-KEY-xcpng

then updating the host using the test developer repo

yum update --enablerepo=xcp-ng-psafont1

and finally restarting all the daemons

xe-toolstack-restart

Note: the repository will only be available for a limited amount of time, after which I will repurpose it and delete the instructions so it's not used anymore by accident.

tjkreidl

Note also that if HA is turned on or off, the host must be restarted for that change to take effect, if I recall correctly.

jmannik

@tjkreidl This hasn't been my experience so far, enabling HA has just enabled HA, no reboot needed.

@psafont I am patching all my hosts now, will do the above test packages on Sunday Night (it is Friday afternoon at the time of this post)

nikade

@jmannik said in Unable to enable High Availability - INTERNAL_ERROR(Not_found):

@tjkreidl This hasn't been my experience so far, enabling HA has just enabled HA, no reboot needed.

@psafont I am patching all my hosts now, will do the above test packages on Sunday Night (it is Friday afternoon at the time of this post)

Correct, no reboot needed to enable/disable HA.

tjkreidl

@nikade Interesting, as that at some point used to be the case, at least with XenServer!
I stand corrected and learned something new.

jmannik

@psafont
That is done now, tried to enable HA again and it was unsuccessful, what would you like me to do now?

olivierlambert

You should check the /var/log/xensource.log, it should provide a more explicit error message

tjkreidl

@olivierlambert Good idea. Also, they should make sure all hosts are at the same update/patch levels, the network is set up properly among the three or more hosts, there is a compatible HA shared storage properly set up, etc.
You folks have a good guide at: https://docs.xcp-ng.org/management/ha/

jmannik

Well this is what im getting now:

{
  "id": "0mhbgkupy",
  "properties": {
    "method": "pool.enableHa",
    "params": {
      "pool": "213186d2-e3ba-154f-d371-4122388deb83",
      "heartbeatSrs": [
        "381caeb2-5ad9-8924-365d-4b130c67c064"
      ],
      "configuration": {}
    },
    "name": "API call: pool.enableHa",
    "userId": "71d48027-d471-4b01-83f9-830df4279f7e",
    "type": "api.call"
  },
  "start": 1761709884550,
  "status": "failure",
  "updatedAt": 1761709923544,
  "end": 1761709923544,
  "result": {
    "code": "INTERNAL_ERROR",
    "params": [
      "unable to gather the coordinator's UUID: Not_found"
    ],
    "call": {
      "duration": 38993,
      "method": "pool.enable_ha",
      "params": [
        "* session id *",
        [
          "OpaqueRef:a83a416f-c97d-1ed8-c7fc-213af89b8f86"
        ],
        {}
      ]
    },
    "message": "INTERNAL_ERROR(unable to gather the coordinator's UUID: Not_found)",
    "name": "XapiError",
    "stack": "XapiError: INTERNAL_ERROR(unable to gather the coordinator's UUID: Not_found)\n    at Function.wrap (file:///opt/xen-orchestra/packages/xen-api/_XapiError.mjs:16:12)\n    at file:///opt/xen-orchestra/packages/xen-api/transports/json-rpc.mjs:38:21\n    at runNextTicks (node:internal/process/task_queues:65:5)\n    at processImmediate (node:internal/timers:453:9)\n    at process.callbackTrampoline (node:internal/async_hooks:130:17)"
  }
}

olivierlambert

That's better @psafont now we now we are missing an UUID somewhere?

psafont

@jmannik
So the problem goes like this:

HA uses a local-only database to avoid depending on the database
This database contains a mapping from UUID to the IP host_address for all hosts in an HA cluster / pool. This information should be gathered right before HA is enabled, from the normal database.
When trying to enable HA, the host fetches the coordinator's address from the filesystem. Then it uses the previous mapping and the coordinator address to find the coordinator's UUID. This step fails.

I'm not sure what has actually happening, but some scenarios come to mind:

XO isn't calling the API function Host.preconfigure_ha, which means the local database is not created (unlikely)
The coordinator's address has somehow changed between the local database being written and the HA being enabled

things to check out:

inspect the values that the failing host has about the host_address of the coordinator / master host, both on:
1. the normal database. You can SSH into the failing host and run the following command, replacinf POOL_UUID with the actual uuid, this can be done deleting POOL_UUID , placing the cursor after the = and pressing tab twice.

xe pool-param-get uuid=POOL_UUID param-name=master | xargs -I _ xe host-param-get uuid=_ param-name=address

and the pool role file, similar to the previous command, SSH in the failing host and run

cat /etc/xensource/pool.conf

Let us know how it goes. If the IPs don't match, there's a problem with the configuration of the member, and otherwise it's because the local database is outdated and should be refreshed before enabling HA. I don't know how XO handles it.

olivierlambert

@psafont I'm not sure to follow, I don't remember seeing any documented endpoint related to prepare HA

psafont

@olivierlambert The call is indeed hidden from the docs, and only callable from inside a pool... it's called as part as Pool.enable_ha