Updates announcements and testing

Danp

Looks like these updates were released earlier today -- https://xcp-ng.org/blog/2023/05/26/may-2023-maintenance-update/

gduperrey

New update candidates for you to test!

Shortly after we released the previous batch of non-urgent updates, XenServer released several updates for Citrix Hypervisor 8.2 CU1. We prepared new update candidates based on these, as well as a specific update of xcp-ng-xapi-plugins.

There's no date for their release yet, but they're ready for your tests and feedback already.

xcp-ng-xapi-plugins: the updater plugin, used by Xen Orchestra to apply updates, can now also install new packages (this will be used to deploy XOSTOR from Xen Orchestra).
kernel: as explained in the hotfix from XenServer XS82ECU1028 "ACPI processor-related data is being reported incorrectly to the hypervisor, affecting Intel - Xeon 84xx/64xx/54xx/44xx/34xx - Sapphire Rapids and possibly other models."
grub: bugfix
lldpad:
- The FCoE service can have a memory leak that could use up dom0 memory
- A resource leak in the FCoE service can crash the service
- When trying to create an LACP bond using Cisco Nexus switches, host could have intermittent connection problems
- XenServer hotfix: XS82ECU1032
xen: Correct a flaw for VMx under Red Hat Enterprise 7 (and derivatives) with a large number of CPUs, that can cause migration failures when trying to migrate to AMD hosts.
- XenServer hotfix: XS82ECU1034

Test on XCP-ng 8.2

From an up to date host:

yum clean metadata --enablerepo=xcp-ng-testing
yum update --enablerepo=xcp-ng-testing xen-* grub* lldpad kernel xcp-ng-xapi-plugins
reboot

The usual update rules apply: pool coordinator first, etc.

Versions

kernel-4.19.19-7.0.16.1.xcpng8.2
grub-2.02-3.2.0.xcpng8.2
lldpad-1.0.1-10.xcpng8.2
xen-*4.13.5-9.32.1.xcpng8.2
xcp-ng-xapi-plugins-1.8.0-1.xcpng8.2

What to test

Normal use and anything else you want to test. The closer to your actual use of XCP-ng, the better.

Test window before official release of the updates

None defined, but early feedback is always better than late feedback, which is in turn better than no feedback

Andrew

@gduperrey I've been running the update on all my active 8.2 machines. I did not run into any of the bugs before. After the update everything is still normal.

JeffBerntsen

@gduperrey I'm running the updates on both lab and production machines and all seems well so far.

NielsH

Yesterday Zenbleed (https://news.ycombinator.com/item?id=36848680) was announced. It mentions there that AMD may have already released microcode patches to fix this.
Is this perhaps the mysterious microcode update form may 16th?

AMD microcode (linux-firmware) and Intel microcode (microcode_ctl). AMD and Intel did not detail what they fix, but everyone is supposed to update. This is the frustrating situation with binary blobs in firmware.

Or can we expect another update to resolve the zenbleed vulnerability in the coming days?

gduperrey

We began to work on the patch yesterday evening. We will publish it for testers later today, and if everything is fine, for everyone after two days (and success in our tests, of course).

gduperrey

New Security Update Candidates (Xen and AMD CPUs)

Xen is being updated to mitigate hardware vulnerabilities in AMD CPUs.

Upstream (Xen project) advisory: XSA-433
- Citrix Hypervisor Security Update for CVE-2023-20593

This issue affects systems running AMD Zen 2 CPUs. Under specific microarchitectural circumstances, it may allow an attacker to potentially access sensitive information.

Components are also updated to add bugfixes and enhancements:

Xen:
- Now, MPX feature is disabled by default. Cross-pool migration and upgrade will be simplified as VMs can migrate more easily from pools with Intel SkyLake, CascadeLake, or CooperLake hardware to pools with later Intel hardware (such as IceLake).
  A reboot is necessary after updating to benefit from this feature.
- Improvements to latency with a limit on the scheduler loadbalancing. This improves performance on large systems with high CPU utilization.

Test on XCP-ng 8.2

From an up to date host:

yum clean metadata --enablerepo=xcp-ng-testing
yum update "xen-*" linux-firmware --enablerepo=xcp-ng-testing
reboot

Versions:

xen-*: 4.13.5-9.34.1.xcpng8.2
linux-firmware: 20190314-8.1.xcpng8.2

What to test

Normal use and anything else you want to test. The closer to your actual use of XCP-ng, the better.

Test window before official release of the updates

~2 days.

Andrew

@gduperrey Updated multiple servers and seems to be fine. But, none are Zen2 systems.

gduperrey

Update published. Thanks for the tests!

https://xcp-ng.org/blog/2023/07/27/july-2023-security-update-zenbleed/

TodorPetkov

Hello,

I saw there is new announcement on Xenbits regarding Zenbleed (https://xenbits.xen.org/xsa/advisory-433.html) - will there be new patch for XCP?

Thanks in advance.

bleader

@TodorPetkov Yes, for now we do not know when this update will be released on XenServer side yet, but it will be published on XCP-ng side too.

What was released for now is suffering from the same issue as described in your link.

If I'm not mistaken:

the linux-firmware update fixes the issues with zenbleed
the kernel patch is working around the case where the updated firmware is not used by disabling features via the control register, and there were too much disabled in the previous patch.
if you're using the updated firmware, this workaround will not be used, and therefore the updated patch is not critical.

You can check you're running the right microcode version via:

journalctl -k --grep=microcode

Without the -k you should be able to see previous boots and ensure the patch_level= has changed. I'm unsure which version to expect there as we do not have zen2 at hand for testing this.

We will indeed provide an update later, likely not in a dedicated update, but with other fixes.

I hope that answers properly your question!

gduperrey

New Security Update Candidates (Xen)

Xen is being updated to correct a flaw in the latest patch (XSA-433) for Zenbleed and AMD CPUs.

Upstream (Xen project) advisory: XSA-433

The patch provided with earlier versions was buggy by unintentionally disabling more bits than expected in the control register due to bad integer variable truncation.

Test on XCP-ng 8.2

From an up to date host:

yum clean metadata --enablerepo=xcp-ng-testing
yum update "xen-*" --enablerepo=xcp-ng-testing
reboot

Version:

xen-*: 4.13.5-9.35.1.xcpng8.2

If you didn't already applied the previous updates, we invite you to also update linux-firmware.

yum update linux-firmware
reboot

Version:

linux-firmware: 20190314-8.1.xcpng8.2

One reboot for the two updates is enough.

What to test

Normal use and anything else you want to test. The closer to your actual use of XCP-ng, the better.

Test window before official release of the updates

~1 days. We'll release before the WE if our internal tests are fine.

gduperrey

Update published. Thanks for the tests!

https://xcp-ng.org/blog/2023/08/04/erratum-july-2023-security-update-zenbleed/

NielsH

@gduperrey Thanks!

I see that shortly after this some more security related patched have become available:
XSA-432: https://www.openwall.com/lists/oss-security/2023/08/08/3
XSA-434: https://www.openwall.com/lists/oss-security/2023/08/08/4
XSA-435: https://www.openwall.com/lists/oss-security/2023/08/08/5

Some of this also seems pretty serious. We were currently busy running patches on our systems. This takes us about 1-2 weeks to complete. Do you think these 3 patches will also become available for XCP-ng? In that case we'd rather wait for those to become available so we don't have to spend another 1-2 weeks immediately after completing the current set of patches.

Thank you!

gduperrey

Hello,

Yes, these patches will become available in XCP-ng. We're working on it to release as soon as possible. We'd like to release them this week, so we do everything we can for that.

There will be a post here for the tests and for the final release.

olivierlambert

Hello @NielsH I don't want to sound moralistic, but if you are using XCP-ng in production without any subscription, and being worried about patches coming fast enough for your production system, you should really think about getting support for it That's exactly what the subscription money is made for! (well, in part but absolutely used for that).

I mean, you are free to not doing it, and even if we do our best to treat everyone fairly (paying or not) for our patches, we won't be against more support so the project can continue to grow

NielsH

@olivierlambert said in Updates announcements and testing:

Hello @NielsH I don't want to sound moralistic, but if you are using XCP-ng in production without any subscription, and being worried about patches coming fast enough for your production system, you should really think about getting support for it That's exactly what the subscription money is made for! (well, in part but absolutely used for that).

I mean, you are free to not doing it, and even if we do our best to treat everyone fairly (paying or not) for our patches, we won't be against more support so the project can continue to grow

Hey,

No worries, I understand your point.
For us specifically, we use local storage and the time it takes to migrate all VMs to a different host, reboot, next host, etc... is about 1-1.5 weeks during working hours. This is why, if another batch of updates is coming soon, we would rather wait and do everything at once instead of update twice in a row. I'm aware of the Rolling Pool Upgrade feature but it is not compatible with local storage.

Regarding XCP-ng Pro support, currently the pricing is a bit too steep for us to be feasable due to the amount of hosts we have. We do however pay for XOA Premium which is more affordable and we do find it valuable to support the developers.

I believe I did see some of your posts around regarding a possible all-in pricing plan which may be interesting for us, so once more details regarding that are available it is something for us to look into

olivierlambert

No worries, and indeed, new pricing might be a good fit for you

gduperrey

New Security Update Candidates (kernel, Xen, linux-firmware, microcode_ctl, XAPI...)

Xen is being updated to mitigate some vulnerabilities:

XSA-432: CVE-2023-34319. Under Linux, a buffer overrun in netback can be triggered due to unusual packets. This behavior was due to the fix of the XSA-423 which didn't account an extreme case of an entire packet being split into as many pieces as permitted by the protocol and still being smaller than the area that's dealt with to keep all headers together. It is possible to crash a host from a vm, with malicious and privileged code.
XSA-434: CVE-2023-20569. Researchers from ETH Zurich have extended their prior research (XSA-422, Branch Type Confusion, a.k.a Retbleed) and have discovered INCEPTION, also known as RAS (Return Address Stack) Poisoning, and Speculative Return Stack Overflow. An attacker might be able to infer the contents of memory belonging to other guests.
XSA-435: CVE-2022-40982. A security issue in certain Intel CPUs may allow an attacker to infer data from different contexts on the same core.

Components are also updated to add bugfixes and enhancements:

guest-templates-json: Added Debian 12 Bookworm
XAPI:
- Several hotfixes and improvements from XS82ECU1033
- From XS82ECU1045 Significant performance improvements on a set of CPU features for servers with Cascade Lake or later Intel CPUs.
microcode_ctl: Update to IPU 2023.3
linux-firmware: Expose additional features for Intel CPUs, especially for Cascade Lake or later Intel CPUs. Updated to latest AMD firmware for processor family 19h.
Xen: Expose MSR_ARCH_CAPS to guests on all Intel hardware by default.
blktap, nbd: An update of the packages for Xostor.

Test on XCP-ng 8.2

From an up to date host:

yum clean metadata --enablerepo=xcp-ng-testing
yum update "xen-*" microcode_ctl linux-firmware kernel forkexecd gpumon message-switch "ocaml-*" rrd2csv rrdd-plugins sm-cli squeezed varstored-guard vhd-tool wsproxy "xapi-*" xcp-networkd xcp-rrdd "xenopsd*" xs-opam-repo "guest-templates-*" blktap xcp-ng-linstor nbd tzdata grub* lldpad xcp-ng-xapi-plugins --enablerepo=xcp-ng-testing
reboot

Version:

forkexecd: 1.18.3-2.1.xcpng8.2
gpumon: 0.18.0-10.1.xcpng8.2
kernel: 4.19.19-7.0.17.1.xcpng8.2
linux-firmware: 20190314-9.1.xcpng8.2
message-switch: 1.23.2-9.1.xcpng8.2
microcode_ctl: 2.1-26.xs26.1.xcpng8.2
ocaml-rrd-transport: 1.16.1-7.1.xcpng8.2
ocaml-rrdd-plugin: 1.9.1-7.1.xcpng8.2
ocaml-tapctl: 1.5.1-7.1.xcpng8.2
ocaml-xcp-idl: 1.96.5-1.1.xcpng8.2
ocaml-xen-api-client: 1.9.0-10.1.xcpng8.2
ocaml-xen-api-libs-transitional: 2.25.5-4.1.xcpng8.2
rrd2csv: 1.2.6-7.1.xcpng8.2
rrdd-plugins: 1.10.9-4.1.xcpng8.2
sm-cli: 0.23.0-53.1.xcpng8.2
squeezed-0.27.0-10.1.xcpng8.2
varstored-guard: 0.6.2-7.xcpng8.2
vhd-tool: 0.43.0-10.1.xcpng8.2
wsproxy: 1.12.0-11.xcpng8.2
xapi: 1.249.32-1.1.xcpng8.2
xapi-nbd: 1.11.0-9.1.xcpng8.2
xapi-storage: 11.19.0_sxm2-9.xcpng8.2
xapi-storage-script: 0.34.1-8.1.xcpng8.2
xcp-networkd: 0.56.2-7.xcpng8.2
xcp-rrdd: 1.33.2-6.1.xcpng8.2
xen: 4.13.5-9.36.1.xcpng8.2
xenopsd: 0.150.17-1.1.xcpng8.2
xs-opam-repo: 6.35.11-1.xcpng8.2
guest-templates-json: 1.9.6-1.3.xcpng8.2
blktap-3.37.4-1.0.2.xcpng8.2
tzdata-2022a-1.el7
xcp-ng-linstor-1.1-3.xcpng8.2
nbd-3.24-1.xcpng8.2
grub-2.02-3.2.0.xcpng8.2

What to test

Normal use and anything else you want to test. The closer to your actual use of XCP-ng, the better.

Test window before official release of the updates

~2 days.

olivierlambert

42 packages and 147M worth of updates

Installed here and worked on my HPE EPYC host