Stuck on boot : Hard Disk - Success

[alpenliebeanj]

Hi, im unable to boot the VM machine, i have used debian 11 and the screen keep stuck in this view, how i should fix?

[olivierlambert]

Have you installed any OS on it first? If you don't have anything in the disk, it's rather normal.

[alpenliebeanj]

@olivierlambert Hello, there is already another istance with Win10 and works properly without problems, but this second istance not working, showing this error

[olivierlambert]

Can you answer my question?

[alpenliebeanj]

@olivierlambert Im sorry, i think i gave to you a reply, i have used a ISO immage of debian 11 and i did all full install process, after the reboot to boot the local hard disk this is showed

[olivierlambert]

Do you have enough memory?

[alpenliebeanj]

@olivierlambert 2gb and 2 core, also i have tryied to run this machine with the otherone Win10 off, still same issue

[olivierlambert]

Can you try to boot with 4GiB RAM in case?

Also, it's a regular Debian 11 install, anything specific?

[alpenliebeanj]

@olivierlambert Selected 4gb and 2core, forced reboot still stuck in this view

[Danp]

Could this be a BIOS vs UEFI issue.

[alpenliebeanj]

@Danp during the boot we cant select UEFI bios for debian, it's as default selection unselected... so

[Danp]

@alpenliebeanj This setting can be viewed / changed from the VM's Advanced tab in XO.

[alpenliebeanj]

@Danp You mean to try to allow UEFI bios during the boot for this istance of Debian11?

[dejavju]

@alpenliebeanj did you find a solution? Having the same issue after moving from KVM and following the migration guide https://xcp-ng.org/docs/migratetoxcpng.html#from-kvm-libvirt.

Tried changing to UEFI aswell but no luck

Bios:

UEFI:

[dejavju]

@dejavju FYI Converted the qcow disk to vhd again and tried and this time it booted, so something perhaps went wrong in the conversion. All is good now.

[olivierlambert]

Ah good to know, thanks for your feedback @dejavju

[erik.lukes]

This post is deleted!

[dejavju]

This post is deleted!

[akoala]

@alpenliebeanj

I know you resolved this a different way but what I did when migrating P2V from a bare metal debian system to xcpng is using clonezilla I transferred the image via the network to the VM which was booted to clonezilla as well. Then I changed the boot option to UEFI in advanced, pressed escape on startup and then proceeded to add a boot menu entry for grub of the Debian system. I would assume the process would have been similar in your case as well to resolve.