1. Home
  2. Xen Orchestra

Subcategories

  • VMs, hosts, pools, networks and all other usual management tasks.

    491 Topics
    4k Posts
    poddingueP
    I tried this on my lab (with XO 6.9.1), moving the pool master to the other host with xe pool-designate-new-master and then back. XO stayed connected both times and picked up the new master, even though Settings > Servers still showed the old host's address; on the way back it took a minute or two to catch up. I didn't test 6.2.2, and I used the CLI rather than the XO 5 Advanced tab, so my guess that your older version is the difference is only a guess. For the XVA, I'm not aware of release notes for the appliance image itself: it updates itself after import, and the notes that exist are per XO version, in the monthly blog post and the changelog, both linked from https://docs.xen-orchestra.com/getting-started/releases#release-cadence-and-channels . How often the downloadable XVA gets rebuilt I don't know, so the 2025.12 tag may just be the date of the base image, but I'd rather ask than guess.

  • ACLs, Self-service, Cloud-init, Load balancing...

    106 Topics
    870 Posts
    D
    I ran into the same problem with DR replicas. Ignoring VMs by tag would solve the problem, but so would excluding the ip address information.

  • All XO backup features: full and incremental, replication, mirrors...

    538 Topics
    6k Posts
    J
    Hi! We recieved a fix via the support after opening a ticket as suggested. Now the pool metadata backup is running smoothly again. As far as i know 6.9 will become "stable" after 6.10 is released. I'd still suggest a patch for the stable version, unless the new release is a few days. Best wishes Jacob

  • Everything related to Xen Orchestra's REST API

    88 Topics
    654 Posts
    poddingueP
    Pretty cool, @samuelolavo, thanks for clarifying!

  • Terraform, Packer or any tool to do IaC

    53 Topics
    492 Posts
    bvitnikB
    @bug-meister Ah. That's cloud-init's support for templating user-data. The issue is that with these templates you only have access to the info available inside the VM itself. No outside data can be used for templating unless it is somehow passed to the VM (inject a file, set xenstore values...)
Log in to post
Load new posts
  • G

    creating trunked connections through physical interfaces.

    3
    0 Votes
    3 Posts
    1k Views
    fohdeeshaF
    @garrya Hi, it sounds like you've set up VLAN interfaces correctly on the XCP-ng side, but the switch they are connected to also needs to be aware of VLAN tags to pass them, or else it will only pass untagged traffic as you noticed. You'll need a smart/managed switch with VLAN capability to do so
  • B

    Authentication via Active Directory

    3
    0 Votes
    3 Posts
    2k Views
    B
    @deoccultist Sadly, none of this seemed to make any difference.
  • S

    Can Network be selected for Backups?

    4
    1
    0 Votes
    4 Posts
    1k Views
    olivierlambertO
    See my answer in the other thread.
  • D

    Support for XO in docker container

    21
    0 Votes
    21 Posts
    15k Views
    olivierlambertO
    We are investigating an elegant solution called RunX. Basically, it might be able to transparently any standard "container stack" (Docker and/or k8s). See https://www.youtube.com/watch?v=9m95hojMtsU There's some work to adapt that to XAPI, but it might be doable. This means XCP-ng could be "container" native while having very good level of isolation with very small VMs (only few MiB overhead).
  • ForzaF

    Add rescan ISO SR from VM menu

    6
    1
    0 Votes
    6 Posts
    2k Views
    pdoniasP
    This is simple enough so we'll implement it in XO 5. Thanks for the feedback!
  • A

    Wasabi just wont work...

    9
    0 Votes
    9 Posts
    3k Views
    K
    5.79.3 / 5.81.0 All of my backups work (now), and speeds range between 5 MB/s to 20 MB/s. Most of my VM's are smaller (zstd helps a lot), though the largest archive is about 80 GB. Also, all of my backups are sequential -- I seem to remember a previous note where somebody had problems with concurrent uploads. My XOCE VM runs with 12 GB, which was the number that "just works" according to some of my earlier problems (and I haven't bothered to chase down or fine tune further).
  • mauzillaM

    This topic is deleted!

    3
    0 Votes
    3 Posts
    4 Views
  • akurzawaA

    backblaze b2 / amazon s3 as remote in xoa

    59
    2
    0 Votes
    59 Posts
    37k Views
    S
  • Z

    Migrating VM fails with DUPLICATE_VM error

    12
    0 Votes
    12 Posts
    4k Views
    I
    @olivierlambert having exactly the same issue as wcom939 reported. What did you mean by "Can you try with xe command to see if you have the same error?" ? Migrate using CLI? there are too many options:)
  • ForzaF

    Alpine Linux from HUB: xe-daemon: CollectOS error

    9
    0 Votes
    9 Posts
    2k Views
    olivierlambertO
    @fohdeesha let's work on another clean Alpine template.
  • mauzillaM

    Task aborted before completion

    3
    0 Votes
    3 Posts
    596 Views
    mauzillaM
    @danp thank you, but in our case the 2nd remote is a hypervisor? I dont know how we should run the backup first then copy the VHD files to the the 2nd hypervisor as continuous replication also creates a VM? I am sure that if I can limit the amount of VM's that is exported once (it's currently 2) then the backups for the large VM should complete. Is there a setting available for this?
  • ForzaF

    Can't edit XO metatata backup config

    Solved
    12
    2
    0 Votes
    12 Posts
    3k Views
    olivierlambertO
    Thanks @badrAZ for the fix!
  • mauzillaM

    Is there a feature to auto start a VM?

    4
    0 Votes
    4 Posts
    1k Views
    mauzillaM
    Thanks both, agreed, in hindsight this should be configured on the VM itself as it could lead to unexpected issues (like maintenance and having VM's start by themselves) Thanks for the input
  • C

    VM Memory Limits Question

    2
    0 Votes
    2 Posts
    3k Views
    olivierlambertO
    Here is a good explanation: https://docs.citrix.com/en-us/xencenter/7-1/dmc-about.html Static can only be set while the VM is offline. Dynamic can be changed in live. When you'll live migrate a VM, it will be decreased to the dynamic min. So take care to use a value that's higher than your VM operating system minimum RAM usage.
  • D

    This topic is deleted!

    1
    0 Votes
    1 Posts
    3 Views
    No one has replied
  • mauzillaM

    Creating network bonds in XO

    5
    0 Votes
    5 Posts
    2k Views
    olivierlambertO
    You can change the bond name yes.
  • C

    Offline host vm removal

    Solved
    6
    0 Votes
    6 Posts
    2k Views
    olivierlambertO
    I just did
  • mauzillaM

    Backups & CR of same VM - Storage impact

    Solved
    5
    0 Votes
    5 Posts
    909 Views
    olivierlambertO
    That's a way to do it. Use smart backup on tags. Eg a tag called "delta only" and a tag "delta+CR", so you'll be sure to assign the right tag to your VM
  • mauzillaM

    LICENSE_RESTRICTION (PCI_device_for_auto_update)

    Solved
    15
    0 Votes
    15 Posts
    4k Views
    olivierlambertO
    Ahh finally!! Enjoy saying goodbye to Citrix We'll be delighted to get you on board (as a user or even as a contributor via our pro support!)
  • T

    New XOA Remote not Working from previous install

    4
    0 Votes
    4 Posts
    751 Views
    olivierlambertO
    No. The parent folder. XO will search for the folder xo-vm-backups directly edit: if your share was previously <NFS_IP>:/myshare, then you should use this very same one, and NOT <NFS_IP>:/myshare/xo-vm-backups