đ°ď¸ XO 6: dedicated thread for all your feedback!
-
@benapetr Hmmm I am also using XCP-ng 8.3 (all patches installed) and latest XO from sources... On my end XO6 is working fine. Maybe it is caused by something specific to your setup/configuration... Maybe start with a fresh XO configuration and check if it then works?
//EDIT: what is your underlying OS version and Node JS version used for building / running XO?
//EDIT2: Also are you running XO behind a reverse proxy? If so try disabling it as I saw issues like these being caused by reverse proxy setups. These kind of issues can be investigated by using dev tools of your browser and checking network / console tab while loading XO.
-
If you are still having issues you can try the script i created to install XO from sources. I would advise not running in production, But i have been using it for a few weeks in my home lab and havent ran into many issues.
-
@MajorP93 yes it's running behind a reverse proxy (nginx) maybe that's the reason I will test it without proxy later
-
@benapetr Check you have websocket support enabled. That's probably it.
-
XO6 is looking great so far.
However, there is one thing I hope there may be an option to change in the future. Currently, in the tree view, VMs are shown under whichever host they are on. This works fine for a few nodes, but quickly becomes a pain with larger clusters (I operate clusters with 8+ nodes) because I have to check each host to find the VM. Is there any possibility of having an option to switch to a view similar to what VMware has, where the hosts are all at the top of the list, and then the VMs are all below it, regardless of which host they are on? I have attached a slightly modified version of an example vCenter screenshot to show better what I mean. I think this would make it much, much easier to find VMs in large clusters. Ideally, folders and/or resource groups with VMs nested under them could also be shown here, but that would require more work. Anyway, looking forward to how XO 6 progresses.
-
Hi @darthkitty8 !
Thanks for the feedback and idea, can you create it at https://feedback.vates.tech and use the "XO 6" tag? Thank you very much!
-
-
@olivierlambert https://feedback.vates.tech/posts/49/pool-view-rather-than-host-view
So youâre interested in having it a bit more like when using VMware vSphere while, regarding VMs, hosts and pools? That could work, but still need a hosts view for each member of the pool. In the hostâs view it needs to be able to see, what VMs are running on it.
Also needs to be compatible with https://github.com/vatesfr/xen-orchestra/issues/9430. If not already synced with NetBox, the pool and hosts should be linked by UUID when synced. So in other words the structure needs to be pool is linked by UUID to host by its UUID and then the same for VMs. So the VMs are linked by UIID to the host UUID.
-
@olivierlambert https://feedback.vates.tech/posts/49/pool-view-rather-than-host-view
So youâre interested in having it a bit more like when using VMware vSphere while, regarding VMs, hosts and pools? That could work, but still need a hosts view for each member of the pool. In the hostâs view it needs to be able to see, what VMs are running on it.
Also needs to be compatible with https://github.com/vatesfr/xen-orchestra/issues/9430. If not already synced with NetBox, the pool and hosts should be linked by UUID when synced. So in other words the structure needs to be pool is linked by UUID to host by its UUID and then the same for VMs. So the VMs are linked by UIID to the host UUID.
Nothing in my post would restrict the view to only seeing VMs within a specific Pool, the view should be flexible enough to shows VMs in a pool.
As it is now, you see all VMs that are running under a given host and then pool.
This in and of itself could become tedious to manage/dig through.
The potential remedy here would be to show all VMs in a pool, and on the given VM show the host where it's running.
-
@olivierlambert https://feedback.vates.tech/posts/49/pool-view-rather-than-host-view
So youâre interested in having it a bit more like when using VMware vSphere while, regarding VMs, hosts and pools? That could work, but still need a hosts view for each member of the pool. In the hostâs view it needs to be able to see, what VMs are running on it.
Also needs to be compatible with https://github.com/vatesfr/xen-orchestra/issues/9430. If not already synced with NetBox, the pool and hosts should be linked by UUID when synced. So in other words the structure needs to be pool is linked by UUID to host by its UUID and then the same for VMs. So the VMs are linked by UIID to the host UUID.
Nothing in my post would restrict the view to only seeing VMs within a specific Pool, the view should be flexible enough to shows VMs in a pool.
As it is now, you see all VMs that are running under a given host and then pool.
This in and of itself could become tedious to manage/dig through.
The potential remedy here would be to show all VMs in a pool, and on the given VM show the host where it's running.
Even in VMware vSphere thereâs a hosts view, that shows things specific to a particular host. This includes VMs running on it, or are currently halted or suspended on it. As well as patches missing from the host, etc. Though it more roundabout to get to it under VMware vSphere.
-
@john.c This is already viewable under each hosts in the pool.
-
Another suggestion, collapse non-running VMs into a single group, rather than having them listed individually.
https://feedback.vates.tech/posts/50/collapse-non-running-vms-into-group
-
-
Small discrepancy: VDIS or VDIs? Which one is it?
Red points out where it's called VDIS.
Green where it is called VDIs.And as a bonus feedback/question. Why is it called "A VDIS" ?(marked with yellow)
-
missing the Health Overview dashboard. if you have 10 pools this was very usefull so I will go back to the old view for now.
also restore a VM is missing only the Backup tab is visible.
if I click on the "eye" it still not there will this feature come in the future? -
Hi @darthkitty8 !
Thanks for the feedback and idea, can you create it at https://feedback.vates.tech and use the "XO 6" tag? Thank you very much!
Another option would be to just mimic XenCenter design to make it more "Xen native" and have Objects view where you have separate tree node for "Hosts" and then "VMs" so you group all hosts and vms together.
-
is there any manual for xo6?
I am trying to create a backup but i cannot find how to.... -
@AlexanderK
xo 6 is rolling out features regularly, for many functions, you must continue to use x05. backup is one of those at this time -
P ph7 referenced this topic
-
After the work You put in fixing
https://xcp-ng.org/forum/topic/12040/restore-only-showing-1-vm/18It seems like VDI-size in
VMs VDISis back to showing size of snapshot instead of size of VM. -
console view is unreadable even if fullscreen was selected. It was much more usable on XO5.
Iam missing a lot of configurations in XO6 which are available on XO5. New interfaces already feel weird, thats normal habbit, but iam very confused with this one.
Can i make /v5 the default interface on this version?
Hello! It looks like you're interested in this conversation, but you don't have an account yet.
Getting fed up of having to scroll through the same posts each visit? When you register for an account, you'll always come back to exactly where you were before, and choose to be notified of new replies (either via email, or push notification). You'll also be able to save bookmarks and upvote posts to show your appreciation to other community members.
With your input, this post could be even better đ
Register Login