[DEPRECATED] SMAPIv3 - Feedback & Bug reports

olivierlambert

Ping @ronan-a for that

ronan-a

@swivvle You can create a ext4 SR like this:

xe sr-create type=ext4-ng name-label=sr-test device-config:device=/dev/sda3

For a basic filebased SR:

xe sr-create type=filebased name-label=sr-test2 device-config:file-uri=/root/sr-folder

Don't hesitate if you have other questions.

Anonabhar

Will it support LVMoiSCSI? Or, is that a future addition?

~Peg

olivierlambert

You need to get rid of SMAPIv1 concepts If you meant "iSCSI block" support, the answer for right now: no.

It's a brand new approach so we'll take time to find the best one, to avoid all the mess that had SMAPIv1 on block devices (non thin, race conditions etc.)

I think the next big "device type" support might be raw (passing a whole disk without any extra layer to the guest).

swivvle

Edit: needed to do

yum install xcp-ng-xapi-storage --enablerepo='xcp-ng-testing'
systemctl start qemuback.service

swivvle

@ronan-a said in SMAPIv3 - Feedback & Bug reports:

xe sr-create type=ext4-ng name-label=sr-test device-config:device=

I can create the SR, create the disk in the SR, but I cannot it attach it to a VM. Error is

"Please include a URI in the device-config " Both filebased and ext4 do this for me.

_danielgurgel

@olivierlambert raw over iscsi?

olivierlambert

raw means any "whole" block device, meaning no snapshot, clone, no shared SR case, etc. Doesn't matter what's underneath. I would say the first use case is passing a whole drive to a VM (eg FreeNAS).

But yeah, you would be able to pass a LUN if you like

ronan-a

@swivvle What's your exact command line? Have you restarted the toolstack?

cocoon

@olivierlambert
Hi, just one question to clarify:
does it mean I could map an untouched/unmodified LUN to a VM?
because I have a usecase where it is very important that the (very small) LUN is not modified as it is used as communication device between the storage system and the guest.
That would be great!
As soon as this is available I will do some testing!

olivierlambert

I think, yes.

r1

@Marc-pezin said in SMAPIv3 - Feedback & Bug reports:

yum install xcp-ng-xapi-storage

This needs to be # yum install xcp-ng-xapi-storage --enablerepo=xcp-ng-testing

I tried following

[13:33 xcp-ng-8-kernel ~]# yum install xcp-ng-xapi-storage --enablerepo=xcp-ng-testing
...
[13:34 xcp-ng-8-kernel ~]# systemctl start qemuback.service
[13:34 xcp-ng-8-kernel ~]# systemctl status qemuback.service
● qemuback.service - qemuback daemon
   Loaded: loaded (/usr/lib/systemd/system/qemuback.service; enabled; vendor preset: enabled)
  Drop-In: /etc/systemd/system/qemuback.service.d
           └─slice.conf
   Active: active (running) since Sat 2019-10-05 13:34:59 IST; 5s ago
 Main PID: 10221 (qemuback.py)
   CGroup: /control.slice/qemuback.service
           ├─10221 /usr/bin/python /usr/bin/qemuback.py
           └─10222 /usr/bin/xenstore-watch /local/domain/0/backend

[13:35 xcp-ng-8-kernel ~]# xe sr-create type=filebased name-label=sr-test2 device-config:file-uri=/root/sr-folder
c6e9c83c-78ee-7727-dec3-1c7474aef533
[13:36 xcp-ng-8-kernel ~]# ls sr-folder/
1  db_backups  lock_db  lock_db_backup  lock_gl  meta.json  meta.lock  sqlite3-metadata.db
[13:37 xcp-ng-8-kernel ~]# xe vbd-create vdi-uuid=cb6cf26c-b079-44e2-9466-3d61fc7ac553 vm-uuid=a00c837e-20ab-4b3b-b125-2a73df1070d2 device=5
6877ea3b-d3c7-e708-5b34-c5e61e5dd1eb
[13:37 xcp-ng-8-kernel ~]# xe vbd-plug uuid=6877ea3b-d3c7-e708-5b34-c5e61e5dd1eb 
Error code: MISSING_URI
Error parameters: Please include a URI in the device-config


FYI
[13:38 xcp-ng-8-kernel ~]# xe vdi-list uuid=cb6cf26c-b079-44e2-9466-3d61fc7ac553 
uuid ( RO)                : cb6cf26c-b079-44e2-9466-3d61fc7ac553
          name-label ( RW): New virtual disk (1)
    name-description ( RW): 
             sr-uuid ( RO): c6e9c83c-78ee-7727-dec3-1c7474aef533
        virtual-size ( RO): 1073741824
            sharable ( RO): false
           read-only ( RO): false

What can be done for Error code: MISSING_URI?

Edit: I did not read the restart instruction.

After restarting tool stack it worked and disk attached as /dev/nbd0!

[13:55 xcp-ng-8-kernel ~]# xe-toolstack-restart 
Executing xe-toolstack-restart
done.
[13:56 xcp-ng-8-kernel ~]# xe vbd-plug uuid=6877ea3b-d3c7-e708-5b34-c5e61e5dd1eb

Marc.pezin

@r1 You are absolutely right, I have updated the command in the initial post and in the devblog. Thanks.

r1

@Marc-pezin Thanks. I'd suggest to also add # xe-toolstack-restart so that Error code: MISSING_URI does not show up

r1

@ronan-a is VDI move from SMAPIv1 to SMAPIv3 supported?

olivierlambert

Nope. I don't know if it's even planned by Citrix.

cg

@olivierlambert said in SMAPIv3 - Feedback & Bug reports:

raw means any "whole" block device, meaning no snapshot, clone, no shared SR case, etc. Doesn't matter what's underneath. I would say the first use case is passing a whole drive to a VM (eg FreeNAS).

But yeah, you would be able to pass a LUN if you like

Sounds a bit like VVOLs from VMware. Not sure how exactly they work but LUNs exclusively for VMs could be an easy thing, regarding TRIM/DISCARD etc.

It just still needs mechanics for XAPI etc. to grab/backup them. Also Snapshots could be done with that, just a different logic.

But first it's probably a target for people needing pure performance.

@olivierlambert said in SMAPIv3 - Feedback & Bug reports:

Nope. I don't know if it's even planned by Citrix.

Noone noes if Citrix has plans at all - not even paying customers. Their communication is kind of a nightmare.

olivierlambert

Eager to see CH 8.1 and what they did to improve their driver to support storage live migration

cg

@olivierlambert said in SMAPIv3 - Feedback & Bug reports:

Eager to see CH 8.1 and what they did to improve their driver to support storage live migration

Any idea about the release date? I mean their "one release a quater" only worked for very short and they failed again with 8.1, which should have been released until 1st of October.

olivierlambert

I think we can reasonably imagine for the end of the year or so