XCP-ng 8.3 betas and RCs feedback 🚀
-
@Ajmind-0 could you open a separate thread so we can discuss your issues in detail there?
-
Updated to latest XCP 8.3 build, however I'm on XOA Premium and that hasn't updated yet so I can't confirm stats restored.
However my issue with NFS speed remains (currently only getting 50MB/s write speed inside VMs or migrating a VM but when I ssh onto the host I can write to the mounted NFS share at 480MB/s)My Bond0 speed is still not registering. Xe pif-param-list shows speed 0, I'm still seeing errors in my xensource.log
[09:44 xcpng-core-3 ~]# xe pif-param-list uuid=13924cb4-288a-b340-e9ac-0034870c2bb5 uuid ( RO) : 13924cb4-288a-b340-e9ac-0034870c2bb5 device ( RO): bond0 MAC ( RO): fe:ff:ff:ff:ff:ff physical ( RO): false managed ( RO): true currently-attached ( RO): true MTU ( RO): 9000 VLAN ( RO): 500 vlan-master-of ( RO): 0f0b3661-03aa-79a3-9592-21c6512e2aff vlan-slave-of ( RO): bond-master-of ( RO): bond-slave-of ( RO): <not in database> sriov-physical-PIF-of ( RO): sriov-logical-PIF-of ( RO): tunnel-access-PIF-of ( RO): tunnel-transport-PIF-of ( RO): management ( RO): false network-uuid ( RO): 2f450b68-035d-77d6-3478-69779015cc4e network-name-label ( RO): Storage host-uuid ( RO): 17cde123-69de-4e13-9306-35ac7d1e25bd host-name-label ( RO): xcpng-core-1 IP-configuration-mode ( RO): Static IP ( RO): 10.10.30.30 netmask ( RO): 255.255.255.0 gateway ( RO): IPv6-configuration-mode ( RO): Static IPv6 ( RO): IPv6-gateway ( RO): primary-address-type ( RO): IPv4 DNS ( RO): properties (MRO): capabilities (SRO): io_read_kbs ( RO): 51259.102 io_write_kbs ( RO): 52415.578 carrier ( RO): false vendor-id ( RO): vendor-name ( RO): device-id ( RO): device-name ( RO): speed ( RO): 0 Mbit/s duplex ( RO): unknown disallow-unplug ( RW): false pci-bus-path ( RO): N/A other-config (MRW): igmp-snooping-status ( RO): unknownFeb 23 09:47:00 xcpng-core-3 xcp-networkd: [error||3 ||network_utils] Error in read one line of file: /sys/class/net/bond0/carrier, exception Unix.Unix_error(Unix.ENOENT, "open", "/sys/class/net/bond0/carrier")\x0ARaised by primitive operation at Xapi_stdext_unix__Unixext.with_file in file "lib/xapi-stdext-unix/unixext.ml", line 90, characters 11-40\x0ACalled from Xapi_stdext_unix__Unixext.buffer_of_file in file "lib/xapi-stdext-unix/unixext.ml" (inlined), line 177, characters 31-83\x0ACalled from Xapi_stdext_unix__Unixext.string_of_file in file "lib/xapi-stdext-unix/unixext.ml", line 179, characters 47-73\x0ACalled from Network_utils.Sysfs.read_one_line in file "ocaml/networkd/lib/network_utils.ml", line 156, characters 6-33\x0A Feb 23 09:47:00 xcpng-core-3 xcp-networkd: [error||3 ||network_utils] Error in read one line of file: /sys/class/net/bond0/device/device, exception Unix.Unix_error(Unix.ENOENT, "open", "/sys/class/net/bond0/device/device")\x0ARaised by primitive operation at Xapi_stdext_unix__Unixext.with_file in file "lib/xapi-stdext-unix/unixext.ml", line 90, characters 11-40\x0ACalled from Xapi_stdext_unix__Unixext.buffer_of_file in file "lib/xapi-stdext-unix/unixext.ml" (inlined), line 177, characters 31-83\x0ACalled from Xapi_stdext_unix__Unixext.string_of_file in file "lib/xapi-stdext-unix/unixext.ml", line 179, characters 47-73\x0ACalled from Network_utils.Sysfs.read_one_line in file "ocaml/networkd/lib/network_utils.ml", line 156, characters 6-33\x0A Feb 23 09:47:00 xcpng-core-3 xcp-networkd: [error||3 ||network_utils] Error in read one line of file: /sys/class/net/bond0/device/vendor, exception Unix.Unix_error(Unix.ENOENT, "open", "/sys/class/net/bond0/device/vendor")\x0ARaised by primitive operation at Xapi_stdext_unix__Unixext.with_file in file "lib/xapi-stdext-unix/unixext.ml", line 90, characters 11-40\x0ACalled from Xapi_stdext_unix__Unixext.buffer_of_file in file "lib/xapi-stdext-unix/unixext.ml" (inlined), line 177, characters 31-83\x0ACalled from Xapi_stdext_unix__Unixext.string_of_file in file "lib/xapi-stdext-unix/unixext.ml", line 179, characters 47-73\x0ACalled from Network_utils.Sysfs.read_one_line in file "ocaml/networkd/lib/network_utils.ml", line 156, characters 6-33\x0A Feb 23 09:47:05 xcpng-core-3 xcp-networkd: [error||3 ||network_utils] Error in read one line of file: /sys/class/net/bond0/carrier, exception Unix.Unix_error(Unix.ENOENT, "open", "/sys/class/net/bond0/carrier")\x0ARaised by primitive operation at Xapi_stdext_unix__Unixext.with_file in file "lib/xapi-stdext-unix/unixext.ml", line 90, characters 11-40\x0ACalled from Xapi_stdext_unix__Unixext.buffer_of_file in file "lib/xapi-stdext-unix/unixext.ml" (inlined), line 177, characters 31-83\x0ACalled from Xapi_stdext_unix__Unixext.string_of_file in file "lib/xapi-stdext-unix/unixext.ml", line 179, characters 47-73\x0ACalled from Network_utils.Sysfs.read_one_line in file "ocaml/networkd/lib/network_utils.ml", line 156, characters 6-33\x0A Feb 23 09:47:05 xcpng-core-3 xcp-networkd: [error||3 ||network_utils] Error in read one line of file: /sys/class/net/bond0/device/device, exception Unix.Unix_error(Unix.ENOENT, "open", "/sys/class/net/bond0/device/device")\x0ARaised by primitive operation at Xapi_stdext_unix__Unixext.with_file in file "lib/xapi-stdext-unix/unixext.ml", line 90, characters 11-40\x0ACalled from Xapi_stdext_unix__Unixext.buffer_of_file in file "lib/xapi-stdext-unix/unixext.ml" (inlined), line 177, characters 31-83\x0ACalled from Xapi_stdext_unix__Unixext.string_of_file in file "lib/xapi-stdext-unix/unixext.ml", line 179, characters 47-73\x0ACalled from Network_utils.Sysfs.read_one_line in file "ocaml/networkd/lib/network_utils.ml", line 156, characters 6-33\x0A Feb 23 09:47:05 xcpng-core-3 xcp-networkd: [error||3 ||network_utils] Error in read one line of file: /sys/class/net/bond0/device/vendor, exception Unix.Unix_error(Unix.ENOENT, "open", "/sys/class/net/bond0/device/vendor")\x0ARaised by primitive operation at Xapi_stdext_unix__Unixext.with_file in file "lib/xapi-stdext-unix/unixext.ml", line 90, characters 11-40\x0ACalled from Xapi_stdext_unix__Unixext.buffer_of_file in file "lib/xapi-stdext-unix/unixext.ml" (inlined), line 177, characters 31-83\x0ACalled from Xapi_stdext_unix__Unixext.string_of_file in file "lib/xapi-stdext-unix/unixext.ml", line 179, characters 47-73\x0ACalled from Network_utils.Sysfs.read_one_line in file "ocaml/networkd/lib/network_utils.ml", line 156, characters 6-33\x0A--Edit--
It appears as though that sys/class/net folder doesn't exist for the Bond0 which is why it can't read it, my physical NIC speeds are correct but those folders do exists[09:51 xcpng-core-1 2d00931d-0af4-1ec8-4bca-08d822c6c335]# ls /sys/class/net/ eth0 eth1 eth2 eth3 lo ovs-system vif1.0 vif10.0 vif11.0 vif12.0 vif13.0 vif14.0 vif15.0 vif16.0 vif17.0 vif18.0 vif19.0 vif2.0 vif20.0 vif3.0 vif4.0 vif5.0 vif6.0 vif7.0 vif8.0 vif9.0 xapi0 xapi1 xapi2 xapi4 xapi5 xapi6--Edit2--
I migrated some more VMs onto NFS and the migrations themselves seem to be hard capped at 50MB/s however I am able to get around 250MB/s when testing INSIDE the VM. So I'm not sure if migrations are CPU capped or what's happening there.I also noticed on ifconfig the bond0 doesn't exist either but they appear to be the xapi networks, each numbered xapi network is a VLAN on my Bond0 interface. Looks like xcp-networkd is just looking in the wrong location
xapi4: flags=4163<UP,BROADCAST,RUNNING,MULTICAST> mtu 9000 inet 10.10.30.30 netmask 255.255.255.0 broadcast 10.10.30.255 ether 00:62:0b:bf:8f:44 txqueuelen 1000 (Ethernet) RX packets 22114210 bytes 138926062482 (129.3 GiB) RX errors 0 dropped 0 overruns 0 frame 0 TX packets 15131116 bytes 94882708122 (88.3 GiB) TX errors 0 dropped 0 overruns 0 carrier 0 collisions 0 -
-
I am also seeing lots of xcp-networkd errors in xensource.log
Feb 23 11:41:17 xcpng-test-01 xcp-networkd: [error||3 ||network_utils] Error in read one line of file: /sys/class/net/bond0/device/vendor, exception Unix.Unix_error(Unix.ENOENT, "open", "/sys/class/net/bond0/device/vendor")\x0ARaised by primitive operation at Xapi_stdext_unix__Unixext.with_file in file "lib/xapi-stdext-unix/unixext.ml", line 90, characters 11-40\x0ACalled from Xapi_stdext_unix__Unixext.buffer_of_file in file "lib/xapi-stdext-unix/unixext.ml" (inlined), line 177, characters 31-83\x0ACalled from Xapi_stdext_unix__Unixext.string_of_file in file "lib/xapi-stdext-unix/unixext.ml", line 179, characters 47-73\x0ACalled from Network_utils.Sysfs.read_one_line in file "ocaml/networkd/lib/network_utils.ml", line 156, characters 6-33\x0A Feb 23 11:41:22 xcpng-test-01 xcp-networkd: [error||3 ||network_utils] Error in read one line of file: /sys/class/net/bond0/carrier, exception Unix.Unix_error(Unix.ENOENT, "open", "/sys/class/net/bond0/carrier")\x0ARaised by primitive operation at Xapi_stdext_unix__Unixext.with_file in file "lib/xapi-stdext-unix/unixext.ml", line 90, characters 11-40\x0ACalled from Xapi_stdext_unix__Unixext.buffer_of_file in file "lib/xapi-stdext-unix/unixext.ml" (inlined), line 177, characters 31-83\x0ACalled from Xapi_stdext_unix__Unixext.string_of_file in file "lib/xapi-stdext-unix/unixext.ml", line 179, characters 47-73\x0ACalled from Network_utils.Sysfs.read_one_line in file "ocaml/networkd/lib/network_utils.ml", line 156, characters 6-33\x0A Feb 23 11:41:22 xcpng-test-01 xcp-networkd: [error||3 ||network_utils] Error in read one line of file: /sys/class/net/bond0/device/device, exception Unix.Unix_error(Unix.ENOENT, "open", "/sys/class/net/bond0/device/device")\x0ARaised by primitive operation at Xapi_stdext_unix__Unixext.with_file in file "lib/xapi-stdext-unix/unixext.ml", line 90, characters 11-40\x0ACalled from Xapi_stdext_unix__Unixext.buffer_of_file in file "lib/xapi-stdext-unix/unixext.ml" (inlined), line 177, characters 31-83\x0ACalled from Xapi_stdext_unix__Unixext.string_of_file in file "lib/xapi-stdext-unix/unixext.ml", line 179, characters 47-73\x0ACalled from Network_utils.Sysfs.read_one_line in file "ocaml/networkd/lib/network_utils.ml", line 156, characters 6-33\x0A Feb 23 11:41:22 xcpng-test-01 xcp-networkd: [error||3 ||network_utils] Error in read one line of file: /sys/class/net/bond0/device/vendor, exception Unix.Unix_error(Unix.ENOENT, "open", "/sys/class/net/bond0/device/vendor")\x0ARaised by primitive operation at Xapi_stdext_unix__Unixext.with_file in file "lib/xapi-stdext-unix/unixext.ml", line 90, characters 11-40\x0ACalled from Xapi_stdext_unix__Unixext.buffer_of_file in file "lib/xapi-stdext-unix/unixext.ml" (inlined), line 177, characters 31-83\x0ACalled from Xapi_stdext_unix__Unixext.string_of_file in file "lib/xapi-stdext-unix/unixext.ml", line 179, characters 47-73\x0ACalled from Network_utils.Sysfs.read_one_line in file "ocaml/networkd/lib/network_utils.ml", line 156, characters 6-33\x0AMy bond interfaces in XO report as running at 0 b/s as well.
-
@stormi
Stats seems to work now -
Stats are back after the latest batch of patches.
-
Stats are back in XO after latest XCP-ng 8.3 updates and compiling XO from latest source. That was fast!
-
Great work from both XCP-ng and XO teams
-
@jivanpal No IPv6 addresses are configured on the host, still getting this error when doing
yum updatefailure: repodata/repomd.xml from xcp-ng-base: [Errno 256] No more mirrors to try. http://mirrors.xcp-ng.org/8/8.3/base/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2a01:240:ab08:2::2: Cannot assign requested address" http://mirrors.xcp-ng.org/8/8.3/base/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2a01:240:ab08:2::2: Cannot assign requested address" http://mirrors.xcp-ng.org/8/8.3/base/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2a01:240:ab08:2::2: Cannot assign requested address" http://mirrors.xcp-ng.org/8/8.3/base/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2a01:240:ab08:2::2: Cannot assign requested address" http://mirrors.xcp-ng.org/8/8.3/base/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2a01:240:ab08:2::2: Cannot assign requested address" http://mirrors.xcp-ng.org/8/8.3/base/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2a01:240:ab08:2::2: Cannot assign requested address" http://mirrors.xcp-ng.org/8/8.3/base/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2a01:240:ab08:2::2: Cannot assign requested address" http://mirrors.xcp-ng.org/8/8.3/base/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2a01:240:ab08:2::2: Cannot assign requested address" http://mirrors.xcp-ng.org/8/8.3/base/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2a01:240:ab08:2::2: Cannot assign requested address" http://mirrors.xcp-ng.org/8/8.3/base/x86_64/repodata/repomd.xml: [Errno 14] curl#7 - "Failed to connect to 2a01:240:ab08:2::2: Cannot assign requested address" -
@ravenet I did not have any problems with my Mellanox Connect-4 Lx card during upgrades from 8.2.1 (5.0 driver), to 8.3 (5.4 driver), then update to current 8.3 (5.9 driver), and then update to Xen 4.17.3. My card has the 14.32.1010 firmware. It is not used for the management interface. It is used by VMs and continued to keep the same ethernet name and function for the VMs.
-
@TheFrisianClause Please open a separate thread for this, where we'll follow-up (was it you who already had one about this very problem?)
-
By the way, it is OK, and even good, to mention any issues you have with 8.3 here. It's what's this thread is for. However, if you don't see any answers because there are too many different discussions happening at the same time, I advise to open a separate thread and mention it here, so that people can jump there and help there.
-
@rmaclachlan This looks awfully similar to https://github.com/xapi-project/xen-api/pull/5451
-
A new version of xo-lite for XCP-ng 8.3 has been released:
Version:
xo-lite-0.2.0-1.xcpng8.3You can update it like this:
yum update xo-liteFor more information about the changes between version 0.1.3 and 0.2.0, you can consult this link: https://github.com/vatesfr/xen-orchestra/blob/master/%40xen-orchestra/lite/CHANGELOG.md
-
@gduperrey should it be available by usual way at XO?
yum update xo-lite Loaded plugins: fastestmirror Loading mirror speeds from cached hostfile No packages marked for update -
@Tristis-Oris Try a
yum clean alland then redo youryum updateXO Update seems to be working well for us on 3 hosts!
-
@rmaclachlan nvm found it. Some long lived cache at repo proxy. Looks i need a wait about 1 extra hour.
-
@stormi I was able to get the new version of xo-lite via
yum update(and it's looking good!), so I have everything up to date, though I'm still running Xen 4.13, not Xen 4.17. However, stats in XO (not XO Lite) still aren't working for me for some reason; I'm running XO v5.92.0 (commit25982ca, from today), built from source. All VMs are running xe-guest-utilities / management agent 7.30.0-2, as that is the version provided by my installation of XCP-ng. -
@stormi said in XCP-ng 8.3 beta
:@ThierryC01 said in XCP-ng 8.3 beta
:For your information, the connection error icon in "Settings"-->"Remotes" that appears when entering a wrong password once, then connecting anyway afterwards with the correct password is still present after all the 8.3 updates.
Is this an XCP-ng issue?
After the latest XOA update, the annoying error icon is gone! So it was an XOA issue
-
Not sure if this is a known issue, I couldn't find it on Github but maybe I was looking in the wrong spot. Is anyone else's network Bond speeds 0? I thought I had seen a fix a month ago for this in a release but now I can't find that changelog
