Is supermicro IPMI data display planned?

Pilow

@olivierlambert HPE DL360 G11
didnt manage to markdown

[{"name": "UID", "value": "0x00", "event": "ok"}, {"name": "SysHealth_Stat", "value": "0x00", "event": "ok"}, {"name": "01-Inlet Ambient", "value": "18 degrees C", "event": "ok"}, {"name": "02-CPU 1 PkgTmp", "value": "63 degrees C", "event": "ok"}, {"name": "03-CPU 2 PkgTmp", "value": "64 degrees C", "event": "ok"}, {"name": "04-P1 DIMM 1-8", "value": "43 degrees C", "event": "ok"}, {"name": "05-P1 PMM 1-8", "value": "disabled", "event": "ns"}, {"name": "06-P1 DIMM 9-16", "value": "43 degrees C", "event": "ok"}, {"name": "07-P1 PMM 9-16", "value": "disabled", "event": "ns"}, {"name": "08-P2 DIMM 1-8", "value": "44 degrees C", "event": "ok"}, {"name": "09-P2 PMM 1-8", "value": "disabled", "event": "ns"}, {"name": "10-P2 DIMM 9-16", "value": "44 degrees C", "event": "ok"}, {"name": "11-P2 PMM 9-16", "value": "disabled", "event": "ns"}, {"name": "12-VR P1", "value": "53 degrees C", "event": "ok"}, {"name": "13-VR P2", "value": "54 degrees C", "event": "ok"}, {"name": "14-HD Max", "value": "disabled", "event": "ns"}, {"name": "15-AHCI HD Max", "value": "disabled", "event": "ns"}, {"name": "16-Exp Bay Drive", "value": "disabled", "event": "ns"}, {"name": "18-Stor Batt", "value": "disabled", "event": "ns"}, {"name": "21-Chipset", "value": "56 degrees C", "event": "ok"}, {"name": "22-BMC", "value": "72 degrees C", "event": "ok"}, {"name": "23-P/S 1 Inlet", "value": "33 degrees C", "event": "ok"}, {"name": "24-P/S 1", "value": "40 degrees C", "event": "ok"}, {"name": "25-P/S 2 Inlet", "value": "42 degrees C", "event": "ok"}, {"name": "26-P/S 2", "value": "43 degrees C", "event": "ok"}, {"name": "28-OCP 1", "value": "disabled", "event": "ns"}, {"name": "30-OCP 2", "value": "disabled", "event": "ns"}, {"name": "36-PCI 3", "value": "disabled", "event": "ns"}, {"name": "49-Board Inlet", "value": "26 degrees C", "event": "ok"}, {"name": "50-Sys Exhaust 2", "value": "47 degrees C", "event": "ok"}, {"name": "51-Battery Zone", "value": "44 degrees C", "event": "ok"}, {"name": "52-Sys Exhaust 1", "value": "48 degrees C", "event": "ok"}, {"name": "53-P/S 2 Zone", "value": "46 degrees C", "event": "ok"}, {"name": "Fan 1", "value": "0x00", "event": "ok"}, {"name": "Fan 1 DutyCycle", "value": "17.36 percent", "event": "ok"}, {"name": "Fan 1 Presence", "value": "0x00", "event": "ok"}, {"name": "Fan 2", "value": "0x00", "event": "ok"}, {"name": "Fan 2 DutyCycle", "value": "17.36 percent", "event": "ok"}, {"name": "Fan 2 Presence", "value": "0x00", "event": "ok"}, {"name": "Fan 3", "value": "0x00", "event": "ok"}, {"name": "Fan 3 DutyCycle", "value": "17.36 percent", "event": "ok"}, {"name": "Fan 3 Presence", "value": "0x00", "event": "ok"}, {"name": "Fan 4", "value": "0x00", "event": "ok"}, {"name": "Fan 4 DutyCycle", "value": "17.36 percent", "event": "ok"}, {"name": "Fan 4 Presence", "value": "0x00", "event": "ok"}, {"name": "Fan 5", "value": "0x00", "event": "ok"}, {"name": "Fan 5 DutyCycle", "value": "17.36 percent", "event": "ok"}, {"name": "Fan 5 Presence", "value": "0x00", "event": "ok"}, {"name": "Fan 6", "value": "0x00", "event": "ok"}, {"name": "Fan 6 DutyCycle", "value": "17.36 percent", "event": "ok"}, {"name": "Fan 6 Presence", "value": "0x00", "event": "ok"}, {"name": "Fan 7", "value": "0x00", "event": "ok"}, {"name": "Fan 7 DutyCycle", "value": "17.36 percent", "event": "ok"}, {"name": "Fan 7 Presence", "value": "0x00", "event": "ok"}, {"name": "Power Supply 1", "value": "0x00", "event": "ok"}, {"name": "PS 1 Input", "value": "180 Watts", "event": "ok"}, {"name": "Power Supply 2", "value": "0x00", "event": "ok"}, {"name": "PS 2 Input", "value": "160 Watts", "event": "ok"}, {"name": "Power Meter", "value": "340 Watts", "event": "ok"}, {"name": "Fans", "value": "0x00", "event": "ok"}, {"name": "Power Supplies", "value": "0x00", "event": "ok"}, {"name": "Memory Status", "value": "0x00", "event": "ok"}, {"name": "Megacell Status", "value": "Not Readable", "event": "ns"}, {"name": "Intrusion", "value": "Not Readable", "event": "ns"}, {"name": "CPU Utilization", "value": "2 unspecified", "event": "ok"}, {"name": "PS 1 Output", "value": "160 Watts", "event": "ok"}, {"name": "PS_Volt_Out_01", "value": "12 Volts", "event": "ok"}, {"name": "PS_Volt_In_01", "value": "228 Volts", "event": "ok"}, {"name": "PS_Curr_Out_01", "value": "14 Amps", "event": "ok"}, {"name": "PS_Curr_In_01", "value": "0.70 Amps", "event": "ok"}, {"name": "PS 2 Output", "value": "150 Watts", "event": "ok"}, {"name": "PS_Volt_Out_02", "value": "12 Volts", "event": "ok"}, {"name": "PS_Volt_In_02", "value": "227 Volts", "event": "ok"}, {"name": "PS_Curr_Out_02", "value": "13 Amps", "event": "ok"}, {"name": "PS_Curr_In_02", "value": "0.70 Amps", "event": "ok"}, {"name": "17.1-ExpBayBoot-", "value": "41 degrees C", "event": "ok"}, {"name": "17.2-ExpBayBoot-", "value": "26 degrees C", "event": "ok"}, {"name": "32.1-PCI 1-I/O m", "value": "84 degrees C", "event": "ok"}, {"name": "32.2-PCI 1-I/O m", "value": "57 degrees C", "event": "ok"}, {"name": "32.3-PCI 1-I/O m", "value": "59 degrees C", "event": "ok"}, {"name": "34.1-PCI 2-I/O m", "value": "81 degrees C", "event": "ok"}, {"name": "34.2-PCI 2-I/O m", "value": "56 degrees C", "event": "ok"}, {"name": "34.3-PCI 2-I/O m", "value": "57 degrees C", "event": "ok"}, {"name": "NIC_Link_14P1", "value": "Not Readable", "event": "ns"}, {"name": "NIC_Link_14P2", "value": "Not Readable", "event": "ns"}, {"name": "NIC_Link_14P3", "value": "Not Readable", "event": "ns"}, {"name": "NIC_Link_14P4", "value": "Not Readable", "event": "ns"}, {"name": "NIC_Link_01P1", "value": "0x00", "event": "ok"}, {"name": "NIC_Link_01P2", "value": "0x00", "event": "ok"}, {"name": "NIC_Link_02P1", "value": "0x00", "event": "ok"}, {"name": "NIC_Link_02P2", "value": "0x00", "event": "ok"}, {"name": "CPU_Stat_C1", "value": "0x00", "event": "ok"}, {"name": "CPU_Stat_C2", "value": "0x00", "event": "ok"}]

olivierlambert

For Supermicro, you can use the following branch olt-supermicro-ipmi and tell me if you have anything displayed in the host view.

olivierlambert

I'm afraid those data aren't complete enough for SuperMicro: I have no BMC info (no IP address), no inlet or outlet temp. It's probably because it's not a full chassis but just info from the motherboard?

acp

@olivierlambert It a Supermicro MB in a SuperMicro chassis. So I have data from the power supply.

Screenshot 2025-10-31 150049.png Screenshot 2025-10-31 150247.jpg

acp

olivierlambert

Yes, sorry I have the BMC IP, but not inlet nor outlet temp, I will check why you don't have total power.

edit: in the sensor data you sent, I don't have any total power available

acp

@olivierlambert said in Is supermicro IPMI data display planned?:

Yes, sorry I have the BMC IP, but not inlet nor outlet temp, I will check why you don't have total power.

edit: in the sensor data you sent, I don't have any total power available

found this:

[15:34 xcp01 ~]# ipmitool dcmi power reading

    Instantaneous power reading:                   166 Watts
    Minimum during sampling period:                121 Watts
    Maximum during sampling period:                259 Watts
    Average power reading over sample period:      156 Watts
    IPMI timestamp:                           Fri Oct 31 19:34:59 2025
    Sampling period:                          01678461 Seconds.
    Power reading state is:                   activated

olivierlambert

But but nothing with the current XAPI plugin, so that might need to modify it.

sluflyer06

Screenshot 2025-11-01 at 9.47.20 PM.png

Weird it is not showing CPU temperatures, that was shown in the test command. (H13SRA-TF super micro board)

olivierlambert

Do you have any logs in the browser console or in XO server output? Maybe a parsing error